| MSDS | : | 8022S ENAMEL REDUCER | | CAS | : | 123-86-4
67-64-1
108-88-3
112-34-5
108-83-8
108-65-6
112-07-2
64742-89-8
64742-94-5 | | NAME | : | butyl acetate (n-butyl acetate)
acetone; dimethyl ketone; 2-propanone
toluene (iarc - group 3) *94-3*
2-(2-butoxyethyoxy)-ethanol, diethylene glycol monobutyl
diisobutyl ketone
propyleneglycol monomethyl ether acetate,
ethylene glycol monobutyl ether acetate, butyl cellosolve
light aliphatic naphtha, vm & p naphtha, lacolene
heavy aromatic solvent naphtha petroleum
volatile organic compounds: 6.57 (theoretical)
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:8022S ENAMEL REDUCER
NIIN:00F003502
MSDS Number: BVTGP
=== Responsible Party ===
Company:EI DUPONT/AUTOMOTIVE PRODS DEPT
Address:1007 MARKET ST BRANDYWINE BLDG 3332
City:WILMINGTON
State:DE
ZIP:19898-5000
Country:US
Info Phone Num:800-441-7515/3637
Emergency Phone Num:800-441-3637/7515
CAGE:EO478
=== Contractor Identification ===
Company:DU PONT E I DE NEMOURS & CO FABRICATED PROD DEPT
Address:1007 MARKET ST BRANDYWINE BLDG 3332
Box:City:WILMINGTON
State:DE
ZIP:19898
Country:US
Phone:800-441-3637
CAGE:90227
Company:EI DUPONT/AUTOMOTIVE PRODS DEPT
Address:1007 MARKET ST BRANDYWINE BLDG 3332
City:WILMINGTON
State:DE
ZIP:19898
Country:US
Phone:(800) 441-7515
CAGE:EO478
============= Composition/Information on Ingredients =============
Name:BUTYL ACETATE (N-BUTYL ACETATE)
CAS:123-86-4
RTECS #:AF7350000
Other REC Limits:150 PPM
OSHA PEL:710 MG/CUM
ACGIH TLV:713 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:ACETONE; DIMETHYL KETONE; 2-PROPANONE
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 9%
OSHA PEL:2400 MG/CUM
ACGIH TLV:750 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:TOLUENE (IARC - GROUP 3) *94-3*
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 5%
Other REC Limits:375 MG/CUM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:2-(2-BUTOXYETHYOXY)-ETHANOL, DIETHYLENE GLYCOL MONOBUTYL
ETHER (BUTYL CARBITOL)
CAS:112-34-5
RTECS #:KJ9100000
Fraction by Wt: 3%
Name:DIISOBUTYL KETONE
CAS:108-83-8
RTECS #:MJ5775000
Other REC Limits:25 PPM
OSHA PEL:50 PPM
ACGIH TLV:145 MG/CUM
Name:PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,
1-METHOXY-2-PROPANOL ACETATE
CAS:108-65-6
RTECS #:AI8925000
Name:ETHYLENE GLYCOL MONOBUTYL ETHER ACETATE, BUTYL CELLOSOLVE
ACETATE, 2-BUTOXYETHYL ACETATE
CAS:112-07-2
RTECS #:KJ8925000
Fraction by Wt: 3%
OSHA PEL:50 PPM
ACGIH TLV:25 PPM
Name:LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE
CAS:64742-89-8
OSHA PEL:300 PPM
ACGIH TLV:300 PPM
Name:HEAVY AROMATIC SOLVENT NAPHTHA PETROLEUM
CAS:64742-94-5
RTECS #:WF3100000
Name:VOLATILE ORGANIC COMPOUNDS: 6.57 (THEORETICAL)
RTECS #:9999999VO
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE & THROAT IRRITATION,
NERVOUS SYSTEM DEPRESSION. SKIN: IRRITATION, DERMATITIS. EYES:
IRRITATION. CHRONIC OVEREXPOSURE TO SOLVENTS MAY BE ASSOCIATED
W/PERMANENT BRAIN & NERVOUS SYSTEM D AMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, DIZZINESS, NAUSEA,
STAGGERING GAIT, CONFUSION, UNCONSCIOUSNESS, BURNING, DISCOMFORT,
RASH
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. IF NOT BREATHING GIVE CPR.
SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/PLENTY OF WATER FOR AT
LEAST 15 MINS. INGESTION: GI DISTRESS. OBTAIN MEDICAL ATTENTION IN
ALL CASES .
===================== Fire Fighting Measures =====================
Flash Point Method:CC
Flash Point:<20F
Lower Limits:0.8
Upper Limits:13.1
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT INCLUDING SCBA
RECOMMENDED. WATER FROM FOG NOZZLES MAY BE USED TO PREVENT PRESSURE
BUILD-UP.
Unusual Fire/Explosion Hazard:>FLASH POINT EMITS FLAMMABLE VAPORS
WHICH, WHEN MIXED W/AIR, CAN BURN/BE EXPLOSIVE. FINE MISTS/SPRAYS
MAY BE FLAMMABLE AT TEMPS
================== Accidental Release Measures ==================
Spill Release Procedures:VENTILATE AREA. REMOVE IGNITION SOURCES.
PREVENT SKIN CONTACT & BREATHING OF VAPOR. CONFINE & REMOVE W/INERT
ABSORBENT. DON'T ALLOW MATERIAL TO CONTAMINATE GROUND WATER
SYSTEMS.
====================== Handling and Storage ======================
Handling and Storage Precautions:OBSERVE LABEL PRECAUTIONS. KEEP AWAY
FROM HEAT, SPARK & FLAME. CLOSE CONTAINER AFTER EACH USE. GROUND
CONTAINERS WHEN POURING.
Other Precautions:DON'T STORE ABOVE 120F. DON'T SAND, FLAME CUT,
BRAZE/WELD DRY COATING W/OUT NIOSH/MSHA APPROVED
RESPIRATOR/APPROPRIATE VENTILATION. DON'T BREATHE VAPORS/MISTS.
DON'T PERMIT ANYONE W/OUT PROPER EQUIPME NT IN APPLICATION AREA.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHEN USED W/PAINT REQUIRING ISOCYANATE
HARDENER/ACTIVATOR, WEAR A NIOSH/MSHA APPROVED CONTINUOUS FLOW
SUPPLIED AIR RESPIRATOR WHEN MIXING THE HARDENER/ACTIVATOR W/THE
PAINT, DURING APPLICATION & UNTIL ALL VAPOR & SPRAY MISTS ARE
EXHAUSTED.
Ventilation:SUFFICIENT IN VOLUME & PATTERN TO KEEP CONTAMINANTS BELOW
APPLICABLE LEVELS.
Protective Gloves:NEOPRENE
Eye Protection:RECOMMENDED W/SPLASH GUARDS/SIDE SHIELDS
Other Protective Equipment:COVERALLS
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING & BEFORE
EATING/SMOKING.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text: 129.2-473F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:APPRECIABLE
Percent Volatiles by Volume:100
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMPS >FLASH POINT, HEAT, SPARKS, FLAME
Hazardous Decomposition Products:CO, CO2, SMOKE, OXIDES OF HEAVY METALS
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE ABSORBED MATERIAL IN ACCORDANCE
W/FEDERAL, STATE & LOCAL REGULATIONS. DON'T INCINERATE IN CLOSED
CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|