Search   
MSDS  
:
 MIL-C-450C TYPE II
CAS  
:
 
NAME  
:
 petroleum naphtha
Catalog of Chemical Suppliers, Buyers, Custom Synthesis Companies And Equipment Manufacturers
[ MIL-C-450C TYPE II ]
Suppliers:   
Not Available
Buyers:  
Not Available
=====================  Product Identification  =====================

MSDS NAME:MIL-C-450C TYPE II
NIIN:00-290-5140
MSDS Number: BWCWS
=== Responsible Party ===
Company:OCTAGON PROCESS INC.
Address:596 RIVER ROAD
City:EDGEWATER
State:NJ
ZIP:07020-1105
Country:US
Info Phone Num:201-313-1187/FAX -1057 (CAROL)
Emergency Phone Num:201-945-9400/800-424-9300(CHEMTREC)
Preparer's Name:J.J. BURGARD
CAGE:82925
=== Contractor Identification ===
Company:OCTAGON PROCESS INC.
Address:596 RIVER ROAD
Box:City:EDGEWATER
State:NJ
ZIP:07020
Country:US
Phone:201-945-9400
CAGE:82925

=============  Composition/Information on Ingredients  =============

Name:PETROLEUM NAPHTHA
Fraction by Wt: 20-25%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:500 PPM
ACGIH TLV:400 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE-MAY CAUSE IRRITATION & CHEMICAL
    CONJUNCTIVITIS. INHALATION-MAY CAUSE UPPER RESPIRATORY TRACT
    IRRITATION. CNS DEPRESSION MAY ALSO OCCUR. INGESTION-WILL CAUSE
    PAIN AND IRRITATION TO GASTROINTESTINAL  TRACT.
Explanation of Carcinogenicity:THIS PRODUCT CONTAINS CARCINOGENS (NTP,
    IARC OR OSHA): NO.
Effects of Overexposure:SKIN-MAY CAUSE DRYING AND CRACKING OF THE SKIN.
    INHALATION-A BURNING SENSATION IN THE CHEST MAY BE PRESENT.
    INGESTION-NAUSEA, VOMITING AND DIARRHEA.
Medical Cond Aggravated by Exposure:NO DATA AVAILABLE.

=======================  First Aid Measures  =======================

First Aid:EYE-FLOOD WITH WATER FOR AT LEAST 15 MINUTES. GET MEDICAL
    ATTENTION. SKIN-WASH EXPOSED AREA WITH MILD SOAP AND WATER. IF
    IRRITATION PERSISTS. GET MEDICAL ATTENTION. INHALATION-MOVE VICTIM
    TO FRESH AIR . WHEN REQUIRED ASSIST WITH VENTILATION, GET MEDICAL
    ATTENTION. INGESTION-DO NOT INDUCE VOMITING. ADMINISTER 4-8 OZ OF
    WATER FOR DILUTION IF PRODUCT IS INGESTED. GET IMMEDIATE MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:55.0F,12.8C
Autoignition Temp:Autoignition Temp Text:ND
Lower Limits:ND
Upper Limits:ND
Extinguishing Media:WATER SPRAY OR FOG, FOAM.
Fire Fighting Procedures:COOL FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE AREA OF SPILLL. ABSORB LIQUID WITH INERT
    MATERIAL AND PLACE IN PROPER CONTAINER FOR DISPOSAL. DO NOT ALLOW
    MATERIAL TO ENTER SEWERS, WATERWAYS OR WATER SUPPLIES. ALL CLEANUP
    ACTIVITIES MUST COMPL Y WITH HAZWOPER (20CFR1910.120)

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL DRY PLACE. STORE AWAY
    FROM STRONG ACIDS, OXIDIZERS AND POISONS. KEEP CONTAINER CLOSED
    WHEN NOT IN USE.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF EXPOSURE MAY OR DOES EXCEED PERMISSIBLE
    EXPOSURE LIMITS, THEN USE A NIOSH-APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST: YES. MECHANICAL: EXPLOSION PROOF FAN.
Protective Gloves:RUBBER OR NEOPRENE.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:PROVIDE LOCAL EMERGENCY SHOWERS AND EYE WASH
    STATIONS. ALL USERS SHOULD CONSULT MSDS BEFORE HANDLING PRODUCT.
Work Hygienic Practices:ALWAYS WASH HANDS AND FACE AFTER USE. LAUNDER
    CONTAMINATED CLOTHING BEFORE RE-USE.
Supplemental Safety and Health
OTHER ENGINEERING CONTROLS-USE AN EXPLOSION PROOF FAN. GROUND ALL
    EQUIPMENT.

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:>120F,>49C
Melt/Freeze Pt:M.P/F.P Text:ND
Decomp Temp:Decomp Text:ND
Vapor Pres:ND
Vapor Density:ND
Spec Gravity:1.0
pH:ND
Viscosity:ND
Evaporation Rate & Reference:<1 (N-BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK COLOR, PERTOLEUM ODOR.
Percent Volatiles by Volume:ND
Corrosion Rate:ND

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, OXIDIZERS AND POISONS.
Stability Condition to Avoid:KEEP AWAY FROM HEAT OR OPEN FLAMES.
Hazardous Decomposition Products:NONE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF MATERIAL IN COMPLIANCE WITH LOCAL,
    STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
SOLTROL 100, AP1000 68551-16-6
9994 FLOOR SEALER
RUSTLICK EDM-30, 72052 64742-47-8
81160, 26BR, FORM-A-GASKET (R) SEALANT, HIGH (SUPDAT) 63148-62-9
112945-52-5
4253-34-3
1309-37-1
O M FINISHING STAINS, 401 64741-41-9
1330-20-7
64742-95-6
ASTEC 100 66402-68-4
13701-59-2
84-74-2
12001-26-2
ASTEC B-16-71 13701-59-2
111-76-2
7779-90-0
ALPENCO LENS CLEANER & ANTI-FOGGING LIQUID 67-63-0
9004-87-9
1340-02-9
7732-18-5
FE-7004-A RESIWELD 2426-08-6
112945-52-5
FE-7004-B RESIWELD
GARD ANTIRUST SAE 10, 30 & 15W-40 I/A/W MIL-L-21260D 64742-54-7
GARD ANTIRUST SAE 10, 30 & 15W-40 I/A/W MIL-L-21260D 64742-54-7
CAPRINUS(R) U OIL 40 64742-52-5
64742-18-3
64742-54-7
63449-39-8
GARDFLEET SAE 10, 30 AND 40 I/A/W MIL-L-2104F 64742-54-7
MIL-L-46152D GRADE 10W-30 7440-66-6
GARDFLEET SAE 10, 30 AND 40 I/A/W MIL-L-2104F 64742-54-7
I-C-OE 30, MIL-L-2104F OE 30, QUAL # MC-3705 64741-88-4
GARDFLEET SAE 10, 30 AND 40 I/A/W MIL-L-2104F 64742-54-7
I-C-OE 30, MIL-L-2104F OE 30, QUAL # MC-3705 64741-88-4
GARDFLEET SAE 10, 30 AND 40 I/A/W MIL-L-2104F 64742-54-7
1% 2% ETC HYDROGEN IN AIR 1333-74-0
7727-37-9
7782-44-7
T555-2
RAW LINSEED OIL 8001-26-1
MURIATIC ACID, 20 DEG BAUME 7647-01-0
ANDEROL 401D SYNTHETIC INSTRUMENT OIL
30008 PQ RP 160/MIL-L-6085B QA
GUNCARE 64742-47-8
71-55-6
DOT 3 NOTOR VEHICLE BRAKE FLUID
SODIUM CHROMATE 7775-11-3
KEROSINE
CARBON DIOXIDE, GAS 124-38-9
PHENYLEPRINE HCL 1% NASAL SOLUTION
AIRCO 60 ALUMINUM 7647-14-5
7789-24-4
7447-41-8
10361-37-2
7646-85-7
XYLENE (MIXED ISOMERS) 1330-20-7
68920-06-9
CU-P BRAZING ALLOY SILVALLOY O 7440-50-8
7723-14-0
CU-P BRAZING ALLOY SILVALLOY O 7440-50-8
7723-14-0
MMM-A-260C, TY.II,GR.B,CL1 110-54-3
9003-55-8
9006-04-6
DRY CLEANING SOLVENT 8030-30-6
75-09-2
127-18-4
SEMI GLOSS ENAMEL 8032-32-4
MIL-C-450C TYPE II
F-102 BASMILE15145B 1314-13-2
8052-41-3
WHITE #17875
NO DUST SWEEPING COMPOUND
CARBON DIOXIDE (GAS) / DRY ICE (SOLID) 124-38-9
RED DECK ENAMEL ALKYD 14807-96-6
1314-13-2
14808-60-7
1309-37-1
51274-00-1
13463-67-7
64742-47-8
64741-92-0
64742-47-8
RED DECK ENAMEL ALKYD 14807-96-6
1314-13-2
14808-60-7
1309-37-1
51274-00-1
13463-67-7
64742-47-8
64741-92-0
64742-47-8
SEMI GLOSS ENAMEL 8032-32-4
SEMI GLOSS ENAMEL 8032-32-4
P407, P707, A357, A557 9000-70-8
7785-23-1
10108-64-2
P407, P707, A357, A557 9000-70-8
7785-23-1
10108-64-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com