===================== Product Identification =====================
MSDS NAME:SOLDER ALLOYS OF LEAD, TIN, SILVER, BISMUTH, ANTIMONY
NIIN:00-702-4067
MSDS Number: BWGKB
=== Responsible Party ===
Company:ALPHA METALS
Address:600 ROUTE 440
City:JERSEY CITY
State:NJ
ZIP:07304
Country:US
Info Phone Num:201-434-6778
Emergency Phone Num:201-434-6778/800-424-9300(CHEMTREC)
CAGE:96613
=== Contractor Identification ===
Company:FRYS METALS INC (FORMER ALPHA METALS)
Address:600 ROUTE 440
Box:City:JERSEY CITY
State:NJ
ZIP:07304
Country:US
Phone:201-434-6778
CAGE:96613
============= Composition/Information on Ingredients =============
Name:LEAD (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:SEE 1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9394
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9394
Name:SILVER (SARA III)
CAS:7440-22-4
RTECS #:VW3500000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.01 MG/M3
ACGIH TLV:0.1 MG/M3; 9394
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:BISMUTH
CAS:7440-69-9
RTECS #:EB2600000
Other REC Limits:NONE RECOMMENDED
Name:ANTIMONY (SARA III)
CAS:7440-36-0
RTECS #:CC4025000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.5 MG/M3
ACGIH TLV:0.5 MG (SB)/M3; 9394
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:INDIUM
CAS:7440-74-6
RTECS #:NL1050000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.1 MG/M3
ACGIH TLV:0.1 MG/M3; 9394
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WELDING CONSUMABLES ARE NON-REACTIVE,
NON-FLAMMABLE, NON-EXPLOSIVE, AND ESSENTIALLY NON-HAZARDOUS UNTIL
USED IN A WELDING OPERATION. WELDING HAZARDS INCLUDE INHALATION OF
FUMES, THERMAL BURNS, RADIAT ION BURNS AND ELECTRIC SHOCK. MAY
CAUSEDAMAGE TO BLOOD-FORMING, NERVOUS, REPRODUCTIVE, INTESTINAL AND
URINARY SYSTEMS.
Effects of Overexposure:EXPOSURE TO WELDING FUMES MAY CAUSE METAL FUME
FEVER RESULTING IN DIZZINESS, NAUSEA, FEVER AND/OR IRRITATION OF
NOSE, THROAT AND EYES. TOXIC GASES CAN BE FATAL. LEAD CAN CAUSE
ANEMIA, INSOMNIA, WEAKNE SS, CONSTIPATION, NAUSEA AND ABDOMINAL
PAIN.
Medical Cond Aggravated by Exposure:DISEASES OF THE BLOOD AND
BLOOD-FORMING ORGANS, KIDNEYS, NERVOUS AND POSSIBLY REPRODUCTIVE
SYSTEMS.
======================= First Aid Measures =======================
First Aid:FUME INHALATION:REMOVE FROM EXPOSURE. GET MEDICAL ATTENTION.
THERMAL BURN:USE NORMAL FIRST AID. ULTRAVIOLET EXPOSURE:SKIN;TREAT
AS SUNBURN. EYE; GET MEDICAL ATTENTION. ELECTRIC SHOCK:TURN OFF
POWER. R EMOVE AND RESTORE BREATHING IF NECESSARY. GET MEDICAL
ATTENTION.
===================== Fire Fighting Measures =====================
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.
================== Accidental Release Measures ==================
Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUES
AND PLACE IN SUITABLE DOT APPROVED CONTAINERS. AVOID INHALATION AND
SKIN EXPOSURE.
Neutralizing Agent:NOT RELEVANT
====================== Handling and Storage ======================
Handling and Storage Precautions:NO SPECIAL HANDLING IS REQUIRED. STORE
AS DIRECTED BY MFR.
Other Precautions:SEE ANSI STANDARD Z49.1-1983. READ "SAFETY IN
WELDING AND CUTTING" FROM AMERICAN WELDING ASSOCIATION, 550 N.W.
JEUNE RD., MIAMI,FL 33135.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA WELD FUME RESPIRATOR OR AIR
SUPPLIED RESPIRATOR WHEN CUTTING, GRINDING OR WELDING IN A CONFINED
SPACE OR WHERE LOCAL EXHAUST OR GENERAL VENTILATION DOES NOT KEEP
EXPOSURE BELOW PEL/TLV.
Ventilation:USE LOCAL VENTILATION WHEN CUTTING, GRINDING OR WELDING TO
KEEP THE DUST, FUMES & GASES FROM THE WORKERS BREATHING ZONE.
Protective Gloves:WELDERS LEATHER GLOVES
Eye Protection:OSHA APPR.GOGGLES/FACE SH'LD W/ANSI LENS
Other Protective Equipment:FLAME RETARDANT CLOTHING WHEN CUTTING,
GRINDING OR WELDING. DO NOT EXPOSE SKIN TO RADIATION WHEN HOT
CUTTING OR WELDING.
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE. WASH THOROUGHLY
BEFORE EATING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
WELDING AND HOT CUTTING FUMES & GASES CANNOT BE CLASSIFIED SIMPLY.
THEIR COMPOSITION AND QUANTITY ARE DEPENDENT ON THE METAL BEING
WELDED, THE PROCEDURES, PROCESSES AND THE TYPE OF WIRE OR
ELECTRODES USED. OTHER INFLUENCING FACTORS ARE THEPRESENCE OF
CONTAMINANTS. CHLORINATED SOLVENTS MAY DECOMPOSE TO TOXIC GASES.
================== Physical/Chemical Properties ==================
HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY METAL, ODORLESS, VARIOUS SHAPES AND
SIZES.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS, HYDROGEN PEROXIDE >52%.
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:WELDING AND CUTTING OPERATION MAY
PRODUCE OXIDES OF THE METALS. (AT TEMPERATURES >1000F)
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS. RECLAIM METALS IF APPROPRIATE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SOLU-MEDROL STERILE POWDER
| 2375-03-3
7558-79-4
7558-80-7
63-42-3 |
|
ENAMEL ALKYD LSTRLESS LO VOC CT BROWN 300099TT-E-527D;771004
| 110-12-3
1330-20-7
64742-95-6
123-86-4
14807-96-6
14808-60-7
78-93-3 |
|
N5178 HIGH GLOSS YELLOW;13655
| 123-86-4
7727-43-7
7440-48-4 |
|
AEROSHELL GREASE 14
| 64742-46-7
64742-53-6
64742-56-9
3159-62-4 |
|
SOLDER ALLOYS OF LEAD, TIN, SILVER, BISMUTH, ANTIMONY
| 7439-92-1
7440-31-5
7440-22-4
7440-69-9
7440-36-0
7440-74-6 |
|
SOLU-MEDROL STERILE POWDER
| 2375-03-3
7558-79-4
7558-80-7
63-42-3 |
|
46-0-0;GRANULAR UREA
| 57-13-6 |
|
PAD, METAL POLISH IMPREGNATED 5 OZ CAN
| 64742-88-7
8052-41-3 |
|
RTV108
| 4253-34-3
9016-00-6 |
|
FORMED MOLECULAR SIEVE 544
| 1313-59-3
1305-78-8
12136-45-7
112945-52-5
1344-28-1
1332-58-7
60676-86-0
7732-18-5 |
|
AERODAG G
| 75-09-2
67-63-0
75-28-5
74-98-6 |
|
LANOXIN
| 20830-75-5 |
|
PENICILLIN G POTASSIUM FOR INJECTION
| 113-98-4
144-33-2
77-92-9 |
|
TT-P-115F TYPE II YELLOW;500Y06
| 108-88-3
8030-30-6
14807-96-6
71-55-6 |
|
W1060(RG45)
| 1333-86-4
7439-96-5
7440-21-3
7440-50-8
7439-98-7
7439-89-6 |
|
POVIDEX, 10% POVIDINE-IODINE, TOPICAL SOLUTION
| |
|
SOLU-MEDROL STERILE POWDER
| 2375-03-3
7558-79-4
7558-80-7
63-42-3 |
|
DEXAMETHASONE SODIUM PHOSPHATE INJECTION, USP
| 2392-39-4 |
|
PSI-690 PRIMER,PART B
| 108-11-2
68412-37-3
9022-96-2
71-55-6 |
|
401071-6, SEALED NICAD BATTERY
| 1310-58-3 |
|
HOT STUFF INSTANT ADHESIVE HS-7
| 7085-85-0
123-31-9 |
|
16376 IMFLO RUST INHIBITIVE INDUSTRIAL ENAMEL HIGH GLOSS
| 13463-67-7
8052-41-3 |
|
MURIATIC ACID
| 7647-01-0
7647-01-0
7732-18-5 |
|
MIL-C-46168,OLIVE DRAB,34088,COATING,POLYURETHANE,754214
| 108-65-6
1330-20-7
88917-22-0
108-88-3
14808-60-7
14464-46-1
68855-54-9
112945-52-5
78-93-3 |
|
VV-P-1078B-0.65 CST
| 9016-00-6 |
|
BACITRACIN, USP, STERILE POWDER
| 1405-87-4 |
|
CHLORIDE STANDARD,477114
| |
|
STK TAPE TRANSPORT CLEANER,6167
| 71-55-6
76-13-1 |
|
4 MOLAR KCL CHLORIDE SOLUTION,477428
| |
|
W15 ALL PURPOSE FLUID
| 64742-53-6 |
|
DEPO-ESTRADIOL STERILE SOLUTION
| 8001-29-4
57-15-8
313-06-4 |
|
DEPROTEINIZING AND CLEANING SOLUTION,477177
| 7647-01-0 |
|
PR-1422 B-1/2 PART A (ACCELERATOR)
| 127-19-5
14307-33-6
13423-61-5
67762-90-7
7732-18-5
1335-30-4
8031-18-3 |
|
MYCIFRADIN ORAL SOLUTION
| 7732-18-5
56-81-5
1405-10-3 |
|
PO2 ELECTROLYTE SOLUTION,477019
| |
|
PCO2 ELECTROLYTE SOLUTION,477020
| |
|
FLUSH CONCENTRATE,477991
| |
|
PCO2 SPACER SOLUTION,477575
| 7447-40-7 |
|
PUMICE,477656
| 1332-09-8 |
|
SILVER POLISH,477256
| |
|
GUARDIAN SEALED LEAD/ACID BATTERY
| 7439-92-1
7440-38-2
7440-70-2
7664-93-9 |
|
CLEOCIN PHOSPHATE STERILE SOLUTION
| 7732-18-5
24729-96-2 |
|
CREST PAINT STRIPPER #7
| 75-09-2
108-95-2
7775-11-3 |
|
CLEOCIN PHOSPHATE STERILE SOLUTION
| 7732-18-5
24729-96-2 |
|
CLEOCIN PHOSPHATE STERILE SOLUTION
| 7732-18-5
24729-96-2 |
|
UREA SOLID
| 57-13-6
7664-41-7
7727-37-9 |
|
EXPRESSION IMPRESSION MATERIAL SYSTEM (7300H),P/N 7302H
| 14808-60-7
68083-19-2
68037-59-2
1308-38-9
112945-52-5
1345-16-0 |
|
EXPRESSION IMPRESSION MATERIAL SYSTEM (7300H), P/N 7307
| 540-81-1
108-88-3
546-68-9
56275-01-5
70131-67-8 |
|
EXPRESSION IMPRESSION MATERIAL SYSTEM (7300H) P/N 7312
| 68083-19-2
14808-60-7
8042-47-5
1309-37-1
471-34-1 |
|
7302H EXPRESS VINYL POLYSILOXANE HYDROPHILIC IMPRESSION
| 14808-60-7
68083-19-2
68037-59-2
1308-38-9
112945-52-5
1345-16-0 |
|
|