===================== Product Identification =====================
MSDS NAME:APCO 1269HS PART A TOPCOAT
NIIN:00F000145
MSDS Number: BBFYN
=== Responsible Party ===
Company:APPLIED PLASTICS CO., INC.
Emergency Phone Num:213/322-8050
CAGE:05866
=== Contractor Identification ===
Company:APPLIED PLASTICS CO
Address:612 E FRANKLIN AVE
Box:City:EL SEGUNDO
State:CA
ZIP:90245
Country:US
CAGE:05866
============= Composition/Information on Ingredients =============
Name:2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)
CAS:111-15-9
RTECS #:KK8225000
Fraction by Wt: 25%
OSHA PEL:S,100 PPM
ACGIH TLV:S, 5 PPM; 9192
===================== Hazards Identification =====================
Effects of Overexposure:MAY CAUSE NAUSEA AND VOMITING;CAN CAUSE SEVERE
SKIN AND EYE IRRITATION.
======================= First Aid Measures =======================
Eyes: FLUSH WITH WATER-IF DISCOMFORT PERSISTS GET MEDICAL
AID. SKIN: WASH AFFECTED AREA WITH SOAP AND WATER. INHALATION:
REMOVE TO FRESH AIR. INGESTION: NO PROBLEMS LIKELY-IF UNUSUAL
SYMPTOMS DEVELOP, SEEK MEDICAL AID.
===================== Fire Fighting Measures =====================
Flash Point:124F T.C.C.
Lower Limits:1.8
Upper Limits:6.7
Extinguishing Media:CO2 OR DRY CHEMICAL
Fire Fighting Procedures:APPLICATION OF WATER TO BURNING LIQUIDTO
DECREASE FLAME.
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:WASH UP WITH SOAP AND WATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:FOR INDUSTRIAL USE ONLY. WARNING. MAY
CAUSE SKIN IRRITATION. HARMFUL IF INHALED. AVOID SKIN COACT. AVOID
BREATHING VAPOR. USE ADEQUATE VENTIL.
Other Precautions:IF SKIN CONTACT OCCURS WASH WITH SOAP AND WATER AT
THE FIRST OPPORTUNITY. KEEP AWAY FROM HEAT, SPARKS AND FIRE. DO NOT
LEAVEONTAINERS OPEN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:AIR SUPPLIED MASK FOR CONCENTRATIONS >2 % BY
VOLUME.
Ventilation:EXHAUST SYSTEM SUFFICIENT TO MAINTAIN LEVEL BELOW 100PPM
Protective Gloves:RUBBER
Eye Protection:STANDARD-GOGGLES,FACE MAS
Supplemental Safety and Health
612 E. FRANKLIN AVE., EL SEGUNDO, CALIF. 90245.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:313F
Vapor Pres:2
Vapor Density:4.7
Spec Gravity:0.95
Evaporation Rate & Reference:<1 BUTYL ACET=1
Solubility in Water:NO DATA
Appearance and Odor:LIGHT STRAW COLORED LIQUID-MILD ODOR
Percent Volatiles by Volume: 50
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE
==================== Disposal Considerations ====================
Waste Disposal Methods:STANDARD CONTROLLED SOLVENT-DISPOSAL SYSTEM
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|