===================== Product Identification =====================
MSDS NAME:APCO 1260HS PART C TOPCOAT
NIIN:00F000145
MSDS Number: BBFYQ
=== Responsible Party ===
Company:APPLIED PLASTICS CO., INC.
Emergency Phone Num:213/322-8050
CAGE:05866
=== Contractor Identification ===
Company:APPLIED PLASTICS CO
Address:612 E FRANKLIN AVE
Box:City:EL SEGUNDO
State:CA
ZIP:90245
Country:US
CAGE:05866
============= Composition/Information on Ingredients =============
Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 98%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:ORGANIC TIN COMPOUND
Fraction by Wt: 2%
OSHA PEL:S, 0.1 MG/M3 (SN)
ACGIH TLV:S, 0.1 MG/M3 (SN)
===================== Hazards Identification =====================
Effects of Overexposure:MAY CAUSE ANESTHESIA AND STRONG SKIN
IRRITATION.
======================= First Aid Measures =======================
Eyes: FLUSH WITH COPIOUS AMOUNTS OF WATER. SEEK MEDICAL AID.
SKIN: WASH THOROUGHLY WITH SOAP & WATER. INHALATION: REMOVE TO
FRESH AIR. IF SEVERE SYMPTOMS DEVELOP SEEK MEDICAL AID. INGESTION:
SEEK MEDI CAL AID IF UNUSUAL SYMPTOMS DEVELOP.
===================== Fire Fighting Measures =====================
Flash Point:79F T.C.C.
Lower Limits:1.1
Upper Limits:7.0
Extinguishing Media:CO2 OR DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:VENTILATE AREA. SOAK UP IN ABSORBANT, CONTAIN.
====================== Handling and Storage ======================
Handling and Storage Precautions:FOR INDUSTRIAL USE ONLY. WARNING. MAY
CAUSE SKIN IRRITATION. HARMFUL IF INHALED. AVOID SKIN COACT. IF
CONTACT OCCURS WASH WITH SOAP & WATER.
Other Precautions:AVOID BREATHING VAPOR. USE ADEQUATE VENTILATION. SPI
CLASSIFICATION 2. KEEP AWAY FROM HEAT, SPARKS AND FIRE. DO NOT
LEAVE COAINER OPEN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:HYDROCARBON VAPOR CANNISTER RESPIRATOR.
Ventilation:SUFFICIENT TO MAINTAIN TLV < OR = 100PPM & 0.1MG/M3
Protective Gloves:HYDROCARB. INSO
Eye Protection:SAFETY GLASSES/SIDE SHIEL
Supplemental Safety and Health
612 E. FRANKLIN AVE., EL SEGUNDO, CALIF. 90245.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:277F
Vapor Pres:10
Vapor Density:3.66
Spec Gravity:0.86
Evaporation Rate & Reference:<1 BUT.ACET.=1
Solubility in Water:INSOLUBLE
Appearance and Odor:WATER WHITE THIN LIQUID-XYLENE ODOR
Percent Volatiles by Volume: 98
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:NO
O2 AND STRONG OXIDANTS.
Stability Condition to Avoid:HIGH TEMPERATURES OR HEAT
Hazardous Decomposition Products:INCOMPLETE COMBUSTION PRODUCES CO.
==================== Disposal Considerations ====================
Waste Disposal Methods:STANDARD INDUSTRIAL FLAMMABLE LIQUID DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|