===================== Product Identification =====================
MSDS NAME:PLASTIC STEEL A RESIN
NIIN:00F000159
MSDS Number: BBFZK
=== Responsible Party ===
Company:DEVCON
Emergency Phone Num:617/777-1100
CAGE:16059
=== Contractor Identification ===
Company:DEVCON CORP
Address:30 ENDICOTT ST
Box:City:DANVERS
State:MA
ZIP:01923-3753
Country:US
Phone:1-508-777-1100
CAGE:16059
============= Composition/Information on Ingredients =============
Name:EPOXY RESIN
Fraction by Wt: 20%
===================== Hazards Identification =====================
Effects of Overexposure:SKIN IRRITATION, POTENTIAL SKIN SENSITIZER.
PROLONGED OR REPEATED CONTACT MAY CAUSE SKIN IRRIT.
======================= First Aid Measures =======================
First Aid:SKIN: REMOVE WITH WARM SOAPY WATER. EYES: FLUSH WITH CLEAR
WATER FOR 15 MINUTES. CONTACT A PHYSICIAN. INHALATION: REMOVE
PERSON TO FRESH AIR.
===================== Fire Fighting Measures =====================
Flash Point:400F T.O.C
Extinguishing Media:CO2 OR DRY CHEMICALS;POLYMER FOAM FOR LARGE FIRES
Fire Fighting Procedures:AVOID BREATHING SMOKE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:AVOID SKIN CONTACT. ABSORB WITH SWEEPING
COMPOUND OR OTHER ABSORBENT MATERIAL AND DIOSE OF.
====================== Handling and Storage ======================
Handling and Storage Precautions:USE WITH ADEQUATE VENTILATION. AVOID
SKIN CONTACT. STORE IN COOL DRY PLACE.
Other Precautions:HANDLE IN ACCORDANCE WITH HAZARDOUS POTENTIALITIES OF
THE CURING AGENT WHEN MIXED THEREWITH.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE IN NORMAL USE.
Ventilation:LOCAL EXHAUST WHEN USED WITH HARDNER.
Protective Gloves:RUBBER
Eye Protection:RECOMMENDED
Supplemental Safety and Health
30 ENDICOTT STREET/DANVERS, MASSACHUSETTS 01923.
================== Physical/Chemical Properties ==================
Vapor Density:NIL
Spec Gravity:3.2
Solubility in Water:NIL
Appearance and Odor:DARK GREY PASTE, LOW ODOR
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:OPEN FLAME OR EXCESSIVE HEAT
Hazardous Decomposition Products:OXIDES OF CARBON, NITROGEN, ALDEHYDES
& ACIDS
Conditions to Avoid Polymerization:HEAT GENERATED WHEN MIXED W/EPOXY
HARDNER. USE CAUTION.
==================== Disposal Considerations ====================
Waste Disposal Methods:BURY IN APPROVED CHEMICAL LANDFILL OR IN
ACCORDANCE WITH STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|