LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INDUSTRIAL ALCOHOL NORMALLY
CONTAINS POISONOUS DENATURANTS WHICH CAN CAUSE A VARIETY OF
SYMPTOMS. WEAKNESS, DROWSINESS, VOMITING, DRUNKENNESS, IRRITATION
TO EYES, DEATH, BLURRED VISION, BLINDNES S, SKIN IRRITATIONS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYE:IRRIGATE WITH WATER FOR AT LEAST 15 MINUTES, LIFTING LIDS
OCCAS, SEEK MED ATTN AS SOON AS POSS, DO NOT WEAR CONT LENSES.
SKIN:WASH W/SOAPY WATER. INHAL:MOVE TO FRESH AIR, PERFORM ARTF RESP
IF NEED ED, SEEK MED ATTN IMMED. INGEST:SEE PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point:55.0F,12.8C
Lower Limits:4.3
Upper Limits:19
Extinguishing Media:DRY CHEMICAL, FOAM, OR CO*2
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . DO NOT USE WATER.
Unusual Fire/Explosion Hazard:FLAMMABLE LIQUID, TOXIC GASES (SUCH AS
CARBON MONOXIDE AND FORMALDEHYDE) MAY BE RELEASED IN A FIRE.
Spill Release Procedures:PERSONS NOT WEARING PROTECTIVE EQUIPMENT AND
CLOTHING SHOULD STAY OUT OF SPILL AREA, REMOVE ALL IGNITION
SOURCES. VENTILATE AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID HEAT, REMOVE ALL IGNITION
SOURCES. WEAR PROTECTIVE EQUIPMENT.
Other Precautions:DO NOT ALLOW PERSONS TO ENTER CONFINED AREAS SUCH AS
SEWERS.
Boiling Pt:B.P. Text:SUPP DATA
Vapor Pres:SUPP DATA
Vapor Density:SUPP DATA
Spec Gravity:SUPP DATA
Evaporation Rate & Reference:5.9 (N-BUTYL=1)
Solubility in Water:SUPP DATA
Appearance and Odor:WATER CLEAR, PUNGENT, CHARACTERISTIC ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS SUCH AS ACETYL CHLORIDE, NITRIC ACID AND HYDROGEN
PEROXIDE. METHANOL MAY ATTACK SOME FORMS OF PLASTICS.
Stability Condition to Avoid:OPEN FLAMES AND SPARKS - OXIDIZING AGENTS.
Hazardous Decomposition Products:CO*2 IS FORMED DURING COMBUSTION.
Waste Disposal Methods:SM QTYS MAY BE ABSORBED ON PAPER TOWELS &
EVAPORATED IN A HOOD. LG QTYS MAY BE COLLECTED & ATOMIZED IN A
SUITABLE COMBUSTION CHAMBER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.