LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CONTACT WITH COMPOUND MAY CAUSE
MECHANICAL IRRITATION OF THE SKIN, EYE AND UPPER RESPIRATORY TRACT.
NO CHRONIC OR LONG TERM HEALTH EFFECTS KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INGEST:CALL MD IMMEDIATELY . SKIN:WASH WITH SOAP AND WATER.
IF BURNED, FLUSH AREA WITH COOL WATER. DO NOT ATTEMPT TO REMOVE
MATERIAL ADHERING TO SKIN. SEEK PROMPT MEDICAL ATTENTION.
EYES:FLUSH W ITH WATER FOR AT LEAST 15 MINUTES. INHAL:REMOVE FROM
EXPOSURE. IF IRRITATION PERSISTS, SEEK PROMPT MEDICAL ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point:842F,450C
Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICALS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CONTACT WITH MOLTEN COMPOUND CAN CAUSE
THERMAL BURNS.
Spill Release Procedures:SWEEP UP SPILLED MATERIAL TO PREVENT SLIPPING
HAZARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL, DRY PLACE. KEEP
CONTAINERS CLOSED TO PREVENT MOISTURE ABSORPTION AND/OR
CONTAMINATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NOT REQUIRED UNDER NORMAL PROCESSING
CONDITIONS.
Ventilation:GENERAL, MECHANICAL:ACCEPTABLE. LOCAL EXHAUST:PREFERRED.
Protective Gloves:RECOM WHEN HNDLG HOT COMPOUND (SUP DAT)
Eye Protection:ANSI APPRVD SAFETY GLASSES .
Other Protective Equipment:EMERGENCY EYE WASH & DELUGE SHOWER WHICH
MEET ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PROT GLOVES:TO PREVENT THERMAL BURNS.
Waste Disposal Methods:INCINERATOR OR LANDFILL IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.