iron calcium carbonate titanium oxide; (titanium dioxide) aluminum oxide (2:3); (aluminum oxide) (sara 313) supp data:well as presence of contams in atm when filler ing 5:diff in percent & form from ings listed. fume & gas ing 6:originating from volatilization, rxn & oxidation of
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:FUMES & GASES CAN BE DANGEROUS
TO YOUR HEALTH. SHORT TERM OVEREXPOSURE TO WELDING FUMES MAY RESULT
IN DISCOMFORT SUCH AS: DIZZINESS, NAUSEA OR DRYNESS OR IRRITATION
OF NOSE, THROAT OR EYES. EYE EXPOSURE MAY CAUSE IRRITATION,
REDNESS,TEARING OR BLURRED VISION. ARC RAYS MAY DAMAGE EYES & SKIN.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:ELECTRIC SHOCK CAN KILL. CHRONIC:LONG
TERM OVEREXPOSURE MAY LEAD TO SIDEROSIS (IRON DEPOSITS IN LUNG) &
IS BELIEVED BY SOME INVESTIGATORS TO AFFECT PULMONARY FUNCTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INHAL:REMOVE FROM EXPOS AREA & CALL FOR MED AID. ADMIN RESP.
IF NO DETECTABLE PULSE, BEGIN EXTERNAL HEART MASSAGE. EMPLOY FIRST
AID TECHNIQUES REC BY AMERICAN RED CROSS. IN CASE OF ELEC SHOCK,
TURN OF F POWER PRIOR TO REMOVAL FROM EXPOS AREA & ADMIN AID.
EYE:FLUSH W/WATER FOR AT LST 15 MINS. SKIN:REMOVE CONTAM CLTHG.
WASH SKIN W/SOAP & WATER. INGEST:DO NOT INDUCE VOMIT. OBTAIN
MEDICAL ATTENTION.
===================== Fire Fighting Measures =====================
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . SEE ANSI Z49.1, SAFETY IN WELDING & CUTTING, PUBLISHED
BY AWS & OSHA PUB 2206(CFR 192-1910).
Unusual Fire/Explosion Hazard:NON-FLAMMABLE: WELDING ARC & SPARK CAN
IGNITE COMBUSTIBLES.
Spill Release Procedures:PICK UP PRODUCT. SWEEP AREA.
====================== Handling and Storage ======================
Handling and Storage Precautions:DURING USE, WELDING ARC & SPARK CAN
IGNITE COMBUSTIBLE MATERIALS. THESE PRODUCTS SHOULD BE REMOVED FROM
THE WORK AREA.
Other Precautions:TRAIN THE WELDER TO KEEP HIS HEAD OUT OF THE FUMES.
Respiratory Protection:USE NIOSH/MSHA APPROVED OR EQUIVALENT FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WELDING IN A CONFINED
SPACE OR WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE
BELOW TLV.
Ventilation:USE ENOUGH VENT, LOC EXHST AT ARC/BOTH TO KEEP FUMES &
GASES BELOW TLV'S IN WORKERS BRTHG ZONE & GEN AREA.
Protective Gloves:WELDER'S PROTECTIVE GLOVES.
Eye Protection:PROTECTIVE WELDING LENS, #10 OR DARKER.
Other Protective Equipment:PROTECTIVE CLOTHING SUCH AS LEATHER APRONS,
ETC.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:PROCESS, PROCS & FILLER METAL BEING USED. OTHER CNDTNS
WHICH ALSO INFLUENCE COMPOSITION & QTY OF FUMES & GASES TO WHICH
WORKER MAY BE EXPOS INCL COATINGS ON METAL BEING JOINED, NUMBER OF
WELDERS & VOL OF WORK SPACE, QUALITY& AMT OF VENT, POSITION OF
OPERATOR'S HEAD IN RELATION TO FUME PLUME AS (ING 5)
Solubility in Water:INSOLUBLE
Appearance and Odor:OPAQUE, REDDISH BROWN, SOLID METAL; NO ODOR.
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE.
Hazardous Decomposition Products:WELDING & BRAZING FUMES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY ARE DEPENDENT UPON METAL BEING
JOINED, (SUPDAT)
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
W/FEDEARL, STATE & LOC AL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.