===================== Product Identification =====================
MSDS NAME:LIQUID HARDENER 0203
NIIN:00-159-5032
MSDS Number: BDDDB
=== Responsible Party ===
Company:DEVCON CORP
Emergency Phone Num:(617) 777-1100
CAGE:16059
=== Contractor Identification ===
Company:CDC INTERNATIONAL, INC.
Address:22 PORTSMOUTH ROAD
Box:City:AMESBURY
State:MA
ZIP:01913
Country:US
Phone:800-424-9300 (CHEMTREC)
CAGE:93648
Company:DEVCON CORP
Address:30 ENDICOTT ST
Box:City:DANVERS
State:MA
ZIP:01923-3753
Country:US
Phone:1-508-777-1100
CAGE:16059
============= Composition/Information on Ingredients =============
Name:DIETHYLENE TRIAMINE
CAS:111-40-0
RTECS #:IE1225000
Fraction by Wt: <5%
Other REC Limits:
OSHA PEL:1 PPM
ACGIH TLV:S, 1 PPM; 9192
Name:TETRAETHYLENEPENTAMINE (TEPA)
CAS:112-57-2
RTECS #:KH8585000
Fraction by Wt: 5-15%
Other REC Limits:
OSHA PEL:
ACGIH TLV:
Name:TALL OIL FATTY ACIDADDUCT OF TEPA
CAS:68155-17-9
Fraction by Wt: >60%
Other REC Limits:
OSHA PEL:
ACGIH TLV:
===================== Hazards Identification =====================
LD50 LC50 Mixture:ORAL LD*50(RAT)1080MG/KG(DETA)SUP DATA
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:SEVERE IRRITATION OR
BURNS.SKIN:SEVERE IRRIT OR BURN POSSIBLE ALLERGIC
RESPONSE.INHAL:RESP IRRIT.POSSIBLE ALLERGIC
RESPONSE.CHRONIC:POSSIBLE SENSITIZATION FROM PROLONGED OR REPEATED
EXPOSUR E.
Explanation of Carcinogenicity:N/A
Effects of Overexposure:SEE HEALTH HAZ (ACUTE & CHRONIC)
Medical Cond Aggravated by Exposure:ASTHMA BRONCHITIS
======================= First Aid Measures =======================
Eyes:IMMEDIATELY FLUSH W/ H*2O FOR 30 MIN.CONTACT A
PHYSICIAN.SKIN:REMOVE CONTAM CLOTHING.WASH W/ SOAP & H*2O.INGEST:DO
NOT INDUCE VOMITING.ADMINISTER LG AMTS OF H*2O OR MILK & TRANSPORT
TO A MEDICAL FACILITY.INHAL:REMOVE TO FRESH AIR CONTACT A
PHYSICIAN IF SYMPTOMS PERSIST.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:250F,121.11C
Extinguishing Media:CO*2 DRY CHEMICAL,FOAM WATER
Fire Fighting Procedures:DILUTION W/ LG VOLUMES OF H*2O WILL REDUCE THE
INTENSITY OF FLAMES WEAR SCBA
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:PREVENT SKIN & EYE CONTACT REMOVE CONTAM
CLOTHING.DISCARD CONTAM LEATHER ARTICLES SUCH AS SHOES & BELTS,
ABSORB SPILLAGE ON INERT MAT & DISCARD IN SUITABLE CONTAINERS.
Neutralizing Agent:
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP HANDS AWAY FROM EYES WHEN HAND
MAT/BEFORE WASH AFT USE. WASH THOROUGHLY BEFORE EAT/SMOKING.STORE
IN A COOL DRY PLACE.
Other Precautions:PROLONGED/REPEATED OVEREXPOSURE MAY CAUSE
SENSITIZATION & ALLERGIC RESPONSE PERSONS SO EFFECTED SHOULD
CONSULT A PHYS.IF SENSITIZATION IS CONFIRMED AVOID FURTHER EXPOSURE
TO MAT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE NEEDED IN NORMAL USE W/ PROPER VENT.IN
POORLY VENT AREAS USE NIOSH APPROVED ORGANIC VAPOR MASK.
Ventilation:LOCAL EXHAUST IS RECOMMENED FOR PROLONGED/REPEATED USE.
EFFECTIVE MECH VENT IS ADEQUATE FOR OCCASIONAL USE.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFETY GLASSES W/SIDESHLDS SPLASH PROOF
Other Protective Equipment:PROTECTIVE CLOTHING SKIN CONTACT
Work Hygienic Practices:OBSERVE GOOD WORK HYGIENIC PRACTICES
Supplemental Safety and Health
TLV: 1PPM(SKIN)(DETA)LD50-LC50 MIX: DERMAL LD 50(RABBIT) 1090MG/KG
(DETA). KEY1:N1.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:>400,204 C
Melt/Freeze Pt:M.P/F.P Text:
Decomp Temp:Decomp Text:
Vapor Pres:<1
Vapor Density:3.5
Spec Gravity:0.96
pH:10-11
Evaporation Rate & Reference:N/A(MFR)
Solubility in Water:APPRECIABLE
Appearance and Odor:BROWN LIQUID;AMMONIA LIKE ODOR
Percent Volatiles by Volume:0
Corrosion Rate:
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZIN AGENTS,ACIDS & CHLORINATED ORGANIC COMPOUNDS
Stability Condition to Avoid:EXPOSURE TO OPEN FLAMES OR EXCESSIVE HEAT
Hazardous Decomposition Products:OXIDES OF NITROGEN,CARBON & AMMONIA
Conditions to Avoid Polymerization:HEAT IS GENERATED WHEN MIXED W/
EPOXY RESIN.USE CAUTION WHEN MIXING QUANTITIES
==================== Disposal Considerations ====================
Waste Disposal Methods:REMOVE TO A WASTE DISPOSAL FACILITY OPERATING IN
COMPLIANCE W/ STATE & LOCAL REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|