===================== Product Identification =====================
MSDS NAME:MOLECULAR SIEVE TYPE 4 A
NIIN:00-159-4466
MSDS Number: BDCZT
=== Responsible Party ===
Company:UNION CARBIDE CORP., MOLECULAR SIEVE DEPT.
Address:39 OLD RIDGEBURY RD
City:DANBURY
State:CT
ZIP:06817-0001
Country:US
Info Phone Num:800-822-4357/203-794-2000
Emergency Phone Num:800-822-4357
CAGE:36346
=== Contractor Identification ===
Company:IMO DELAVAL INC
Address:4223 MONTICELLO BLVD
Box:21510
City:CLEVELAND
State:OH
ZIP:44121-0510
Country:US
Phone:216-382-5500
CAGE:81833
Company:SUD-CHEMIE INC/SUB CHEMIE PERFORMANCE PACKAGING DIV
Address:926 SOUTH 8TH ST (FORMALLY HUMIDIAL)
Box:610
City:COLTON
State:CA
ZIP:92324-0610
Country:US
Phone:909-825-1793
CAGE:00334
Company:UNION CARBIDE CORP LINDE DIV
Address:39 OLD RIDGEBURY RD
Box:City:DANBURY
State:CT
ZIP:06817-0001
Country:US
Phone:800-822-4357; 304-744-3487
CAGE:36346
============= Composition/Information on Ingredients =============
Name:SODIUM OXIDE
CAS:1313-59-3
Fraction by Wt: <30%
Other REC Limits:NONE SPECIFIED
Name:SILICA, AMORPHOUS, PRECIPITATED AND GEL
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: <50%
Other REC Limits:NONE SPECIFIED
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3; 9293
Name:ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS
FORMS) (SARA III)
CAS:1344-28-1
RTECS #:BD1200000
Fraction by Wt: <30%
Other REC Limits:NONE SPECIFIED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-EYES:MAY CAUSE
IRRITATION,REDNESS,
CONJUNCTIVA.SKIN:IRRITATION,REDNESS.INHALATION:MAY CAUSE IRRITATION
OF THE NOSE & THROAT,COUGH & CHEST DISCOMFORT.INGESTION:NO EVIDENCE
OF ADVERSE EFFECTS KNOW N.CHRONIC-PROLONGED INHALATION MAY CAUSE
LUNG DAMAGE.
Effects of Overexposure:EYES/SKIN: IRRITATION, REDNESS. INHALATION:
IRRITATION OF NOSE AND THROAT, COUGH, CHEST DISCOMFORT.
Medical Cond Aggravated by Exposure:BREATHING OF DUST MAY AGGRAVATE
ASTHMA AND INFLAMMATORY OR FIBROTIC PULMONARY DISEASE.
======================= First Aid Measures =======================
First Aid:EYE CONTACT: FLUSH WITH WATER FOR 15 MINUTES. SKIN CONTACT:
WASH WITH SOAP AND WATER. INHALATION: REMOVE TO FRESH AIR.
INGESTION: IF LARGE QUANTITIES ARE SWALLOWED, THEN DRINK 2 GLASSES
OF WATER. INDU CE VOMITING IF CONSCIOUS.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:UNUSED MATERIAL WILL NOT BURN. USE MEDIA
APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:DEPENDS ON THE USE OF MATERIAL. USED MATERIAL
MAY CONTAIN PRODUCTS OF A HAZARDOUS NATURE.THE USER MUST IDENTIFY
THE HAZARD AND INFORM THE FIRE FIGHTERS.
Unusual Fire/Explosion Hazard:IN THEIR FRESH UNUSED STATE,MOLECULAR
SIEVES ARE NOT FLAMMABLE.WHEN EXPOSED TO WATER,THEY CAN GET QUITE
HOT AND BOIL THE WATER.FLOODING WILL REDUCE THE HEAT.
================== Accidental Release Measures ==================
Spill Release Procedures:SWEEP THE SPILL AREA. COLLECT AND PLACE THE
SPILLED MATERIAL IN A WASTE DISPOSAL CONTAINER. AVOID RAISING DUST.
Neutralizing Agent:NOT APPLICABLE.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A DRY PLACE.KEEP CONTAINERS
TIGHTLY CLOSED TO PREVENT BLOWING DUST. PH RANGE IF IN AQUEOUS
SLURRY 8-11.
Other Precautions:CAUTION:CAUSES EYE IRRITATION.BREATHING DUST MAY BE
HARMFUL.MAY CAUSE SKIN IRRITATION.OPEN CONTAINER SLOWLY TO AVOID
DUST.DON'T GET IN EYES.USE WITH ADEQUATE VENTILATION.BEFORE USING,
KNOW THE HAZARDS OF THE PRODUCTS TO BE ABSORBED ON SIEVE
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHERE THERE IS EXCESSIVE DUSTINESS, WEAR NIOSH-
APPROVED DUST MASK OR RESPIRATOR.(OSHA 29 CFR 1910.134).
Ventilation:LOCAL EXHAUST TO MINIMIZE DUST.
Protective Gloves:LIGHT PROTECTIVE GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE WASH STATION.
Work Hygienic Practices:AVOID RAISING DUST.AVOID CONTACT WITH EYES,SKIN
AND CLOTHING.
Supplemental Safety and Health
NOTE TO PHYSICIAN:THIS PRODUCT IS A DESICCANT AND GENERATES HEAT AS IT
ADSORBS WATER. THE USED PRODUCT CAN CONTAIN MATERIAL OF A HAZARDOUS
NATURE. IDENTIFY THAT MATERIAL AND TREAT ACCORDINGLY.
================== Physical/Chemical Properties ==================
HCC:V7
Spec Gravity:1.1, 2.0(CRYST)
pH:8-11
Appearance and Odor:BEADS, PELLETS, MESH, CAKE OR POWDER; ODORLESS
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
SUDDEN CONTACT WITH HIGH CONCENTRATION OF CHEMICALS HAVING HIGH HEATS
OF ABSORPTION SUCH AS OLEFINS, HCL, ETC.
Stability Condition to Avoid:MOISTURE (WATER) CAN CAUSE RISE IN
TEMPERATURE WHICH MAY RESULT IN BURN.
Hazardous Decomposition Products:WILL COME FROM THE RETAINED MATERIALS
BY THE SIEVE.IN EXTREME HEAT, OXIDES OF INGREDIENTS WILL FORM.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN AN APPROVED LANDFILL
ACCORDING TO ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|