===================== Product Identification =====================
MSDS NAME:EA 913 PART A
NIIN:00-159-5067
Kit Part:Y
MSDS Number: BDDDD
=== Responsible Party ===
Company:DEXTER CORP., HYSOL DIVISION
Emergency Phone Num:(415) 687-4201
CAGE:1JB33
=== Contractor Identification ===
Company:DEXTER CORP THE HYSOL DIV
Address:1 DEXTER DR
Box:City:SEABROOK
State:NH
ZIP:03874
Country:US
Phone:603-474-5541/FAX: 603-474-5545
CAGE:1JB33
Company:DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address:2850 WILLOW PASS ROAD
Box:312
City:BAY POINT
State:CA
ZIP:94565-3299
Country:US
Phone:202-483-7616
CAGE:33564
============= Composition/Information on Ingredients =============
Name:EPOXY RESINS
Fraction by Wt: 68%
Name:ASBESTOS (AMIANTHUS, OBSOLETE AMOSITE), (FOR OSHA PEL, SEE
29CFR 1910.1101)
CAS:1332-21-4
RTECS #:CI6475000
Fraction by Wt: 32%
OSHA PEL:0.2 FIBERS/CC
ACGIH TLV:0.5 FIBERS/CC; A1;89
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
===================== Hazards Identification =====================
Effects of Overexposure:CAUTION! MAY CAUSE SKIN & EYE IRRITATION.
======================= First Aid Measures =======================
First Aid:WASH SKIN W/SOAP & WATER. FLUSH EYES IMMED W/PLENTY OF WATER.
===================== Fire Fighting Measures =====================
Flash Point:>200F TCC
Extinguishing Media:FOAM, DRY CHEMICALS, CO*2
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE EXCESS. CLEAN RESIDUE W/SOLVENTS
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AT 75F
Other Precautions:IF IT IS NEC TO SAND THE CURED ADHESIVE "WET SANDING"
IS RECM TO ELIMINATE AIRBORNE ASBESTOS. FOR DRY SANDING FOLLOW
RECOMMENDATIONS IN SECTION VIII.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPRVD RESP. FOR ASBESTOS IF DRY
SADED, ABRADED
Ventilation:LOCAL EXHAUST & MECHANICAL HIGHLY RECM BY MFR
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES OR GOGGLES
Supplemental Safety and Health
KEY1:N1.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Spec Gravity:1.2
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS GREY PASTE W/EPOXY ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CO, ALDEHYDES, ACIDS
==================== Disposal Considerations ====================
Waste Disposal Methods:MFR RECM LANDFILL OR CONTROLLED BURNING AS
REGULATED BY ALL GOVERNMENTAL AGENCIES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|