===================== Product Identification =====================
MSDS NAME:ECCOBOND 87H (NF)
NIIN:00-159-5019
MSDS Number: BDDCT
=== Responsible Party ===
Company:GRACE W R AND CO EMERSON & CUMING DEWEY & ALMY DIV
Address:869 WASHINGTON ST
City:CANTON
State:MA
ZIP:02021-2513
Country:US
Info Phone Num:617-828-3300
Emergency Phone Num:617-935-4850 OR 617-938-8630
Preparer's Name:DAVID HAAS
CAGE:0NAV2
=== Contractor Identification ===
Company:GRACE W R & CO EMERSON & CUMING DEWEY & ALMY CHEM
Address:869 WASHINGTON ST
City:CANTON
State:MA
ZIP:02021-2513
Country:US
Phone:617-935-4850
CAGE:04552
Company:GRACE W R AND CO
Address:919 18TH ST NW
City:WASHINGTON
State:DC
ZIP:20006
Country:US
Phone:410-659-9000
CAGE:0NAV2
============= Composition/Information on Ingredients =============
Name:METHYLENE CHLORIDE (SARA III)
CAS:75-09-2
RTECS #:PA8050000
Fraction by Wt: 30-40%
Other REC Limits:NONE SPECIFIED
OSHA PEL:500 PPM/C,1000; Z2
ACGIH TLV:50 PPM, A2; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:METHYL CHLOROFORM (1,1,1-TRICHLOROETHANE)
CAS:71-55-6
RTECS #:KJ2975000
Fraction by Wt: 30-40%
Other REC Limits:NONE SPECIFIED
OSHA PEL:350 PPM/450 STEL
ACGIH TLV:350 PPM/450STEL,9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 5-10%
Other REC Limits:NONE SPECIFIED
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:CHLOROBENZENE (SARA III), (MONOCHLOR0BENZENE)
CAS:108-90-7
RTECS #:CZ0175000
Fraction by Wt: 2-5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:75 PPM
ACGIH TLV:10 PPM; 9192
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
Name:ISOPROPYL ALCOHOL (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 1-5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192
Name:PROPYLENE OXIDE (SARA III)
CAS:75-56-9
RTECS #:TZ2975000
Fraction by Wt: 0.1%
Other REC Limits:NONE SPECIFIED
OSHA PEL:100 PPM
ACGIH TLV:20 PPM; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
Name:PHENOLIC RESIN
Fraction by Wt: 5-10%
Other REC Limits:NONE SPECIFIED
Name:SYNTHETIC RUBBER
Fraction by Wt: 5-10%
Other REC Limits:NONE SPECIFIED
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:EYES: SEVERE BUT REVERSIBLE EYE
IRRITATION. INHALATION: OVEREXPOSURE MAY CAUSE RESPIRITORY
IRRITATION AND SEVERE BUT REVERSIBLE LIVER AND KIDNEY INJURY,
CENTRAL NERVOUS SYSTEM INJURY AND CARDIAC SENSI TIZATION. HARMFUL
IF INGESTED. SKIN: CONTACT MAY CAUSE MILD IRRITATION. LONG EXPOSURE
TO LIQUID MAY CAUSE DERMITITIS.
Effects of Overexposure:IRRITATION OF THE EYES, SKIN AND RESPIRATORY
TRACT. MAY CAUSE HEADACHE, DIZZINESS, NAUSEA AND ANESTHETIC EFFECTS
OR OTHER TEMPORARY CENTRAL NERVOUS SYSTEM EFFECTS. MAY ALSO CAUSE
ALLERGIC SKIN REACTIO NS WITH SYMPTOMS INCLUDING RASH, ITCHING,
HIVES AND SWELLING OF THE EXTREMITIES.
Medical Cond Aggravated by Exposure:EXPOSURE MAY AGGRIVATE PRE-EXISTING
SKIN, EYE AND RESPIRATORY DISORDERS.
======================= First Aid Measures =======================
Eyes: FLUSH EYES WITH WATER FOR 15 MINUTES. GET MEDICAL
ATTENTION. INHALATION: REMOVE TO FRESH AIR. GIVE CPR IF NOT
BREATHING. IF BREATHING DIFICULT GIVE OXYGEN. GET MEDICAL
ATTENTION. INGESTION: DO N OT INDUCE VOMITING. IF CONSCIOUS GIVE
WATER TO DRINK. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH AREA WITH SOAP AND WATER. GET MEDICAL ATTENTION IF
IRRITATION PERSISTS.
===================== Fire Fighting Measures =====================
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS. CLOSED CONTAINERS MAY
VIOLENTLY RUPTURE UNDER FIRE CONDITIONS.
================== Accidental Release Measures ==================
Spill Release Procedures:WIPE UP SMALL SPILLS AND WASH AREA WITH SOAP
AND WATER. DIKE LARGE SPILLS TO PREVENT RELEASE TO SEWERS AND
WATERWAYS. COLLECT SPILLED MATERIAL, SOAK UP RESIDUE WITH ABSORBENT
AND WASH AREA WITH SOAP A ND WATER.COLLECT ABSORBED MATERIAL AND
WASH WATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. KEEP
CONTAINERS CLOSED WHEN NOT IN USE. KEEP AWAY FROM HEAT AND IGNITION
SOURCES.
Other Precautions:AVOID PROLONGED OR REPEATED CONTACT WITH THE VAPORS
AND THE LIQUID. STORE IN AREA WITH ADEQUATE VENTILATION.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF EXPOSURES EXCEED PEL/TLV VALUES, USE AN
APPROPRIATE, PROPERLY FITTED RESPIRATOR. THE TYPE OF RESPIRATOR
PROTECTION SELECTED WILL DEPEND UPON THE CONDITIONS OF USE. OBSERVE
OSHA REGULATIONS FOR RESP IRATORY PROTECTION (29 CFR 1910.134).
Ventilation:LOCAL AND MECHANICAL(GENERAL) EXHAUST THAT PROVIDES
ADEQUATE VENTILATION TO MAINTAIN AREA WITHIN THE PEL/TLV VALUES.
Protective Gloves:NITRILE RUBBER GLOVES
Eye Protection:CHEMICAL SPLASH GOGGLES OR FACE SHIELD
Other Protective Equipment:WEAR INDUSTRIAL WORK CLOTHING. USE RUBBER
APRON OR BOOTS IF NEEDED. HAVE EMERGENCY EYE WASH AND SAFETY SHOWER
AVAILABLE.
Work Hygienic Practices:WASH HANDS AND FACE AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
AVOID PROLONGED OR REPEATED EXPOSURE. DO NOT GET ON SKIN OR IN EYES. DO
NOT BREATHE VAPORS OR MIST. DO NOT INGEST. READ PRECAUTIONS ON
LABEL BEFORE USE.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:120F,49C
Vapor Pres:220 @25C
Vapor Density:>AIR
Spec Gravity:1.25
Solubility in Water:INSOLUBLE
Appearance and Odor:YELLOW LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:80-85
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS AND BASES.
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION. DO NOT STORE IN OPEN CONTAINERS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
ALDEHYDES, PHENOLS, PHOSGENE, ACIDS AND OTHER ORGANICS MAY BE
FORMED DURING COMBUSTION.
Conditions to Avoid Polymerization:UNCONTROLLED MIXING WITH CURING
AGENTS AND EXPOSURE TO STRONG OXIDIZERS, ACIDS AND BASES.
==================== Disposal Considerations ====================
Waste Disposal Methods:CONTACT YOUR LOCAL ENVIRONMENTAL OFFICER.
DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|