Search   
MSDS  : POSTAL GRAY PRIMER
CAS  :
NAME  : pigments
vehicle
solvents
others
===================== Product Identification =====================

MSDS NAME:POSTAL GRAY PRIMER
NIIN:00-159-4518
MSDS Number: BDDBF
=== Responsible Party ===
Company:HAAS CHEMICAL CORPORATION
Emergency Phone Num:717 562-3800
CAGE:OO150
=== Contractor Identification ===
Company:HAAS CHEMICAL CORPORATION
Phone:717 562-3800
CAGE:OO150

============= Composition/Information on Ingredients =============

Name:PIGMENTS
Fraction by Wt: 5.4%

Name:VEHICLE
Fraction by Wt: 9.0%

Name:SOLVENTS
Fraction by Wt: 70.6%
ACGIH TLV:100 PPM

Name:OTHERS
Fraction by Wt: 15.0%
ACGIH TLV:1000 PPM

===================== Hazards Identification =====================

Effects of Overexposure:EXCESSIVE PROLONGED INHALATION MAY RESULT IN
HEADACHES, NAUSEA, EYE IRRITATION.

======================= First Aid Measures =======================

First Aid:REMOVE EXPOSED PERSON TO FRESH AIR, IF SWALLOWED, DO NOT
INDUCE VOMITTING. CALL A PHYSICIAN IMMEDIATELY. FLUSH CONTAMINATED
AREAS WITH WATER.

===================== Fire Fighting Measures =====================

Flash Point:-156F
Lower Limits:2.2
Upper Limits:9.4
Extinguishing Media:USE NO WATER, USE CARBON DIOXIDE
Fire Fighting Procedures:REMOVE ALL COMBUSTIBLE MATERIALS.
Unusual Fire/Explosion Hazard:CONTAINERS MAY EXPLODE UPON HEATING ABOVE
130F. KEEP FROM HEAT OR FLAMES.

================== Accidental Release Measures ==================

Spill Release Procedures:AVOID BREATHING VAPORS. REMOVE ALL COMBUSTIBLE
MATERIALS. CONTAIN SPILL. APPLY ABSORNT MEDIA.

====================== Handling and Storage ======================

Handling and Storage Precautions:KEEP FROM HEAT AND SPARKS. AVOID
CONTACTING SKIN WITH VAPOR WHILE SPRAYING.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:NONE
Ventilation:LOCAL EXHAUST: USE ADEQUATE VENTILATION
Protective Gloves:NONE
Eye Protection:NONE
Other Protective Equipment:NONE
Supplemental Safety and Health
HAAS CHEMICAL CORPORATION 430 N. MAIN ST. TAYLOR, PA. 18517

================== Physical/Chemical Properties ==================

HCC:V3
Boiling Pt:B.P. Text:-46F
Vapor Density:1.76
Spec Gravity:1.2
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORED MATERIAL, SOLVENT ODOR
Percent Volatiles by Volume:71.0

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:NO
Stability Condition to Avoid:EXPOSURE TO TEMPERATURES OVER 130F.

==================== Disposal Considerations ====================

Waste Disposal Methods:DEPOSIT IN AIR-TIGHT CONTAINER. AVOID
PUNCTURING. DO NOT INCINERATE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
GILLITE 2400 1310-73-2
7722-64-7
FORMED MOLECULAR SIEVE
MOLECULAR SIEVE TYPE 4 A 1313-59-3
112945-52-5
1344-28-1
FERLON 1310-73-2
7732-18-5
ROYCO 783D 64742-53-6
BRAYCO MICRONIC 783E 64742-46-7
1330-78-5
MIL-H-6083D; HYDRAULIC FLUID 74-98-6
75-28-5
AVREX 904 HYDRAULIC FLUID 1330-78-5
ADHESIVE 826 8030-30-6
POSTAL GRAY PRIMER
P-803-66 108-88-3
POSTAL RED 11136
POST OFFICE RED (11136) 108-88-3
1330-20-7
75-09-2
8030-30-6
U.S. POSTAL BLUE
POST OFFICE BLUE (15050) 108-88-3
8030-30-6
1330-20-7
75-09-2
IB 2641 75-09-2
1330-20-7
108-88-3
SS-4155,PRIMER 5593-70-4
8030-30-6
78-10-4
884155 5593-70-4
8030-30-6
78-10-4
A-6
A-40 ADHESIVE,PART B 1332-21-4
EXTERIOR LATEX
ROYCO 808
MIL-L-7808J;LUBRICATING OIL;PROD CODE 25921
BRAYCO 880H (MIL-L-7808G) 78-30-8
CVV ADHESIVE 108-88-3
109-99-9
78-93-3
6549CVV
1549CVV
HEAT TREATING SALT 7631-99-4
7632-00-0
7647-14-5
HEAT TREATING SALT 7631-99-4
7757-79-1
7647-14-5
SCOTCHWELD STRUCTURAL ADHESIVE 2054-A
SCOTCHWELD STRUCTURAL ADHESIVE 2054-B 2426-08-6
PROTACHEM SMO 1338-43-8
GLYCOMUL O 1338-43-8
EMSORB 2500 (SMO)SORBITAN MONO-OLEATE 1338-43-8
SORBITAN MONOOLEATE 1338-43-8
ADIPRENE L-167 URETHANE RUBBER 9009-54-5
584-84-9
ASSEMBLY FLUID NUMBER 1 8012-95-1
2-ETHYLBUTANOL 97-95-0
2-ETHYL BUTANOL 97-95-0
EPOCAST 41-A(RESIN)
ECCOBOND 87H (NF) 75-09-2
71-55-6
108-88-3
108-90-7
67-63-0
75-56-9
A-701 ADHESIVE
PM6003 RESIN
PG-2125,PART A 1317-65-3
13463-67-7
108-88-3
112945-52-5
PG-2125,PART B 111-40-0
56-81-5
108-88-3
67-63-0
90-72-2
F-2 HARDENER 111-40-0
LIQUID HARDENER 0203 111-40-0
112-57-2
68155-17-9
EPON CURING AGENT(R) U, 43638 68610-56-0
111-40-0
108-95-2
EA 913 PART A 1332-21-4
EA 913 PART B 101-77-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net