===================== Product Identification =====================
MSDS NAME:FORMULA 336 GEAR OIL
NIIN:00F046553
MSDS Number: BYNDJ
=== Responsible Party ===
Company:STATE CHEMICAL MFG CO, THE
Address:3100 HAMILTON AVE
City:CLEVELAND
State:OH
ZIP:44114-3701
Country:US
Info Phone Num:216-861-7114
Emergency Phone Num:216-861-7114
CAGE:53798
=== Contractor Identification ===
Company:STATE CHEMICAL MANUFACTURING CO.
Address:3100 HAMILTON AVENUE
Box:City:CLEVELAND
State:OH
ZIP:44114-3701
Country:US
Phone:216-861-7114
CAGE:53798
============= Composition/Information on Ingredients =============
Name:MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED HEAVY
PARAFFINIC, LUBRICATING OIL BASE STOCK
CAS:64741-88-4
RTECS #:PY8040500
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM
Name:RESIDUAL OILS (PETROLEUM), HYDROTREATED *95-4*
CAS:64742-57-0
ACGIH TLV:5 MG/CUM
Name:SOLVENT-REFINED RESIDUUM, REFINED PETROLEUM OILS *95-4*
CAS:64742-01-4
===================== Hazards Identification =====================
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: MAY CAUSE IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, NAUSEA, VOMITING/DIARRHEA
======================= First Aid Measures =======================
Eyes: FLUSH IMMEDIATELY W/PLENTY OF COOL WATER FOR 15 MINS.
SKIN: WASH W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:480F
Extinguishing Media:DRY CHEMICAL, CO2/FOAM
Fire Fighting Procedures:USE WATER TO COOL FIRE EXPOSED CONTAINERS,
STRUCTURES & TO PROTECT PERSONNEL. WATER/FOAM MAY CAUSE FROTHING.
WEAR POSITIVE SUPPLIED/SCBA.
Unusual Fire/Explosion Hazard:EMPTY CONTAINERS MAY RETAIN PRODUCT
RESIDUE & FLAMMABLE EXPLOSIVE VAPORS. DON'T CUT, DRILL, GRIND/WELD
ON/NEAR FULL, PART FULL, PART FULL/EMPTY CONTAINERS.
================== Accidental Release Measures ==================
Spill Release Procedures:ABSORB IN SAND/OIL ABSORBENT.
====================== Handling and Storage ======================
Handling and Storage Precautions:DON'T REUSE EMPTY CONTAINERS. DESTROY
BY CRUSHING/RETURNING TO A DRUM RECONDITIONER. PRODUCTS ARE
INTENDED FOR INDUSTRIAL & INSTITUTIONAL USE ONLY.
Other Precautions:DON'T USE CUTTING TORCH NEAR CONTAINERS/GREASE SINCE
THE MATERIAL WILL BURN AT HIGH TEMPS >450F. NOT FOR HOUSEHOLD
USE/RESALE. KEEP OUT OF REACH OF CHILDREN. READ & FOLLOW LABEL
DIRECTIONS & PRECAUTIO NS BEFORE USING THE PRODUCT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT REQUIRED.
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:REQUIRED
Eye Protection:REQUIRED
Other Protective Equipment:NONE
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Spec Gravity:0.903
Solubility in Water:NEGLIGIBLE
Appearance and Odor:A CLEAR RED LIQUID W/A MILD ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:BY BURNING: CO
==================== Disposal Considerations ====================
Waste Disposal Methods:REMOVE TO LANDFILL. INCINERATE. DISPOSE OF IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|