Search   
MSDS  : ALCATEL 100
CAS  :
NAME  : non-hazardous ients
===================== Product Identification =====================

MSDS NAME:ALCATEL 100
NIIN:00N019669
MSDS Number: CBBDT
=== Responsible Party ===
Company:INLAND VACUUM INDUSTRIES
Address:35 HOWARD AVE
City:CHURCHVILLE
State:NY
ZIP:14428
Country:US
Info Phone Num:716-293-3330
Emergency Phone Num:716-293-3330
CAGE:59256
=== Contractor Identification ===
Company:INLAND VACUUM INDUSTRIES INC
Address:35 HOWARD AVE
Box:373
City:CHURCHVILLE
State:NY
ZIP:14428
Country:US
Phone:716-293-3330
CAGE:59256

============= Composition/Information on Ingredients =============

Name:NON-HAZARDOUS INGREDIENTS
OSHA PEL:N/K
ACGIH TLV:N/K

===================== Hazards Identification =====================

LD50 LC50 Mixture:LD50:>30 MG/KG-1
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE AND CHRONIC:NONE LISTED BY
MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

======================= First Aid Measures =======================

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . SKIN:WASH WITH SOAP & WATER. EYE:FLUSH W/WATER FOR AT LEAST
15 MINUTES. INGEST:GIVE LIQUIDS & INDUCE VOMITING IF VICTIM IS CON
SCIOUS. SMALL AMOUNTS IN MOUTH SHOULD BE WASHED OUT.

===================== Fire Fighting Measures =====================

Extinguishing Media:WATER FOG, CHEMICAL FOAM, DRY FOAM, CO*2.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

================== Accidental Release Measures ==================

Spill Release Procedures:CLEAN UP USING AN ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

====================== Handling and Storage ======================

Handling and Storage Precautions:STORAGE PER NFPA CLASS III B.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:DEPENDS ON CONCENTRATION IN AIR. NIOSH APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST:AS NEEDED TO COMPLY W/EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VP:8.5E-05/@25C.

================== Physical/Chemical Properties ==================

Boiling Pt:B.P. Text:234F,112C
Vapor Pres:SUPDAT
Vapor Density:13
Spec Gravity:0.8
Evaporation Rate & Reference:<0.001
Solubility in Water:NIL
Appearance and Odor:VISCOUS GOLDEN LIQUID W/FAINT PETRO ODOR.
Percent Volatiles by Volume:NIL

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON DIOXIDE.

==================== Disposal Considerations ====================

Waste Disposal Methods:CHECK FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
CARBONIC ACID, LEAD (II) SALT, LX0130 598-63-0
LOW TEMP MOD POLYESTER, BEI-915A 8032-32-4
1330-20-7
64742-88-7
PURGEABLE A, 48851 75-69-4
124-48-1
127-18-4
79-01-6
67-56-1
56-23-5
67-66-3
75-09-2
78-87-5
108-90-7
75-34-3
79-00-5
110-75-8
75-35-4
PURGEABLE B, 48852 107-06-2
71-55-6
79-34-5
156-60-5
542-75-6
100-41-4
75-25-2
75-27-4
67-56-1
71-43-2
108-88-3
MULTI-PURPOSE CERAMIC WALL & FLOOR TILE ADHESIVE, 314 8002-05-9
108-88-3
EPOCAST 220 A, FPC0062 25068-38-6
12001-26-2
112945-52-5
106-89-8
BLACK WATERBORNE ST OF CA, 2378A9 67-56-1
57-55-6
14464-46-1
1317-65-3
64-17-5
PHREEGUARD 5110, 1734 1310-58-3
FORMULA 12-L, 0144014 7632-00-0
STAINING BROWN DTM 64-17-5
123-86-4
71-36-3
9004-70-0
ALCATEL 100
FORMULA 159, 0804518 7631-90-5
FORMULA 12-L 7632-00-0
XYLENOL ORANGE TETRASODIUM SALT 3618-43-7
KRONOS 13463-67-7
21645-51-2
112945-52-5
COLOR FIXER AND REPLENISHER, 822353 7732-18-5
7783-18-8
7757-83-7
7631-90-5
DME MOLD SAVER 1330-20-7
PLBA2-2X, CUSTOM PLASMA STANDARD, 1,000 PPM (SUP DAT) 7697-37-2
513-77-9
7732-18-5
SPI 5006 CARBON PAINT FOR ELECTRON (SUP DAT) 7782-42-5
71-36-3
107-98-2
67-63-0
107-41-5
00517 DRY FILM VYDAX, MOLD RELEASE AGENTS & (SUP DAT) 115-10-6
76-13-1
71-55-6
116-14-3
75-45-6
FG BOTTOMKOTE BLACK, 779 1330-20-7
8032-32-4
64742-88-7
1317-39-1
1314-13-2
INTERPON 700 BLUE, EJ005U 57455-37-5
13463-67-7
1317-65-3
7727-43-7
PATHMAKER 64-02-8
497-19-8
INSL THANE S/G DEEP BASE, BGU2587 8052-41-3
WEST SYSTEM 407 LOW-DENSITY FILLER, 407 9003-35-4
93763-70-3
112945-52-5
50-00-0
9111 (NF CLEANER/DEGREASER), 1202/0988 71-55-6
78-92-2
FLEX STRIPPER S DEFLUXER, 1644 AEROSOL 76-13-1
75-45-6
124-38-9
67-63-0
75-09-2
FLUORESCEIN ISOTHIOCYANATE ISOMER I MINIMUM 90%,F7250 3326-32-7
CUSTOM PLASMA STANDARD, PLFE2-2X 7697-37-2
7439-89-6
7732-18-5
PLTI9-2X, CUSTOM PLASMA STANDARD, 1,000 PPM (SUP DAT) 16962-40-6
QUALITY CONTROL STANDARD, QC-7 7697-37-2
7732-18-5
PLMO9-2X, SINGLE ELEMENT PLASMA SOLUTION (SUP DAT) 13106-76-8
7732-18-5
NINHYDRIN SPRAY, 201C 68476-85-7
1330-20-7
141-78-6
64-17-5
485-47-2
PORELON INK PAD/FPT 267-268-268A 111-42-2
532-82-1
1333-86-4
RAPID SET EPOXY ADHESIVE, PART A, 2332A9 25936-38-6
2210-79-9
13463-67-7
14807-96-6
LOW IR EPOXY-POLYAMIDE PRIMER; GREEN, 463-07-034E 123-86-4
108-88-3
108-65-6
112926-00-8
1317-61-9
78-93-3
14464-46-1
18540-29-9
51274-00-1
14808-60-7
B LASTER PENETRATING CATALYST 62-53-3
64742-94-5
67-63-0
1330-20-7
ZPW WOOD PRESERVATIVE, 930-933
CATALYST, ER-2355C 101-77-9
84-74-2
RUBBER AND VINYL COVE BASE ADHESIVE, TA-714 8052-41-3
102-71-6
107-21-1
1332-58-7
14808-60-7
MARATHON, 1010 8052-41-3
1330-20-7
MONO-COAT E179FF 5131-66-8
71-55-6
78-92-2
71-23-8
7951 LAGGING ADHESIVE, WHITE, 100980 14808-60-7
1309-64-4
13463-67-7
107-21-1
DIALA OIL AX, 68745 64742-53-6
128-37-0
64742-46-7
UNIPRIME 100% ACRYLIC PRIMER, 4000 107-21-1
PARK AVE S/G DEEP BASE ALKYD, 4210 64742-47-8
14808-60-7
FOAM PLUS 101-68-8
9016-87-9
75-45-6
COLD CURE EPOXY - PART A 25085-99-8
84-74-2
95-48-7
9895, ENDURANCE SEMI-TRANSPARENT DECK & (SUPD AT) 64742-47-8
14808-60-7
64742-95-6
71-43-2
25551-13-7
95-63-6
8052-41-3
AIR TOOL OIL, 2531, AB7069 64741-97-5
64741-96-4
8012-95-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net