=====================  Product Identification  =====================

MSDS NAME:STARDUST SUPER ABSORBENT
NIIN:00N068835
MSDS Number: CBJNH
=== Responsible Party ===
Company:PARADIGM INTERNATIONAL INC
Address:17165 GILLETTE
City:IRVINE
State:CA
ZIP:92714
Country:US
Info Phone Num:714-660-1414
Emergency Phone Num:714-660-1414
CAGE:PARAD
=== Contractor Identification ===
Company:PARADIGM INTERNATIONAL INC
Address:17165 GILLETE
Box:City:IRVINE
State:CA
ZIP:92714
Country:US
Phone:714-660-1414
CAGE:PARAD
Company:PARADIGM INTERNATIONAL, INC
Address:1534 E. EDINGER, SUITE 4
Box:UNKNOW
City:SANTA ANA
State:CA
ZIP:92705-4912
Country:US
Phone:714-550-4902
CAGE:00ED3

=============  Composition/Information on Ingredients  =============

Name:PERLITE; (AMORPHOUS SILICEOUS MINERAL CONTAINING INGS 2-4
    IN VARIABLE COMPOSITION)
CAS:93763-70-3
RTECS #:SD5254000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Name:SODIUM (CERCLA)
CAS:7440-23-5
RTECS #:VY0686000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:POTASSIUM
CAS:7440-09-7
RTECS #:TS6460000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:ALUMINUM SILICATE
CAS:1302-93-8
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INNOCUOUS DUST. OVEREXPOSURE MAY CAUSE
    COUGHING AND SNEEZING.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE.

=======================  First Aid Measures  =======================

First Aid:INGEST: CALL MD IMMEDIATELY . EYES: IMMEDIATELY FLUSH
    W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM
    MD . SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD . INHAL: 
    BREATHE FRESH AIR.

=====================  Fire Fighting Measures  =====================

Flash Point:NON-FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE . NONE REQD IF
    PROD UNUSED. IF USED TO COLLECT FLAMM LIQS, THEN (SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROT
    EQUIPMENT . NONE REQD IF PROD UNUSED. IF USED TO COLLECT FLAMM
    LIQS, CONSULT MSDS(S) OF FLAMM LIQ COLLECTED.
Unusual Fire/Explosion Hazard:NONE IF PRODUCT UNUSED. IF USED TO
    COLLECT FLAMMABLE LIQUIDS, THEN CONSULT MSDS(S) OF FLAMMABLE LIQUID
    COLLECTED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SWEEP UP WITH BROOM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE IN UNUSED FORM.
Other Precautions:NONE IN UNUSED FORM. AFTER PRODUCT HAS BEEN USED TO
    COLLECT LIQUID MATERIALS, CONSULT MSDS(S) OF THE LIQUID COLLECTED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN AN ENCLOSED ENVIRONMENT USE OF A NIOSH/MSHA
    APPROVED DUST MASK AND GOGGLES ARE RECOMMENDED FOR PERSONAL
    COMFORT.
Ventilation:NOT APPLICABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NORMAL GOOD HANDLING PRACTICES.
Supplemental Safety and Health
EXTING MEDIA: CONSULT MSDS(S) OF FLAMMABLE LIQUID COLLECTED.

==================  Physical/Chemical Properties  ==================

Spec Gravity:2.30 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:DRY WHITE POWDER; NO ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
HYDROFLUORIC ACID.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:NONE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
    STATE & LOCAL REGULATIONS . IF PROD UNUSED, THEN NO SPECIAL
    DISPOSAL PROCEDURE NECESSARY. AFTER PROD HAS BEEN USED TO COLLECT
    LIQUID MATERIALS, DISPO SE IN COMPLIANCE WITH MSDS(S) OF
    LIQUIDCOLLECTED.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***