Search   
MSDS  
:
 TSX-3
CAS  
:
 1317-61-9
NAME  
:
 iron oxide, magnetite      *96-3*
=====================  Product Identification  =====================

MSDS NAME:TSX-3
NIIN:00F051760
MSDS Number: CCFRL
=== Responsible Party ===
Company:CARBOTEK
Address:1480 NW 94TH AVE
City:MIAMI
State:FL
ZIP:33172-5000
Country:US
Info Phone Num:305-591-7107
Emergency Phone Num:800-547-5504
CAGE:GO620
=== Contractor Identification ===
Company:CARBOTEK
Address:1480 NW 94TH AVE
City:MIAMI
State:FL
ZIP:33172-5000
Country:US
Phone:305-591-7107
CAGE:GO620
Company:CARBOTEK INC
Address:1480 NW 94TH AVENUE
Box:City:MIAMI
State:FL
ZIP:33172
Country:US
Phone:305-591-7107
CAGE:00UJ7

=============  Composition/Information on Ingredients  =============

Name:IRON OXIDE, MAGNETITE      *96-3*
CAS:1317-61-9
Fraction by Wt: 26-46%
ACGIH TLV:10 MG/CUM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MINIMAL LUNG IRRITATION
    MAY OCCUR.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH W/SOAP & WATER.
    EYES: FLUSH W/WATER. INGESTION: DILUTE STOMACH W/WATER. OBTAIN
    MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:FOAM, DRY CHEMICAL, CO2, WATER SPRAY/MIST.
Fire Fighting Procedures:AVOID INHALATION OF SMOKE.
Unusual Fire/Explosion Hazard:MATERIAL IS COMBUSTIBLE. WHEN DISPERSED
    IN AIR AS A DUST, IT CAN FORM EXPLOSIVE MIXTURES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:LOOSE INK CAN BE REMOVED USING A VACUUM
    CLEANER & MAY BE SWEPT UP (AVOID DUST INHALATION-USE APPROPRIATE
    DUST MASK IF NECESSARY).

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY WELL VENTILATED
    AREA.
Other Precautions:AVOID PROLONGED INHALATION OF EXCESSIVE DUST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:FOR USE OTHER THAN NORMAL CUSTOMER OPERATING
    PROCEDURES, RESPIRATORS MAY BE REQUIRED.
Ventilation:NONE REQUIRED
Eye Protection:GOGGLES
Work Hygienic Practices:NORMAL CARE IN HANDLING A PARTICULATE MATERIAL.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:>212F
Spec Gravity:1.5-1.7
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE BLACK POWDER W/MILD RESINOUS ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Hazardous Decomposition Products:COMBUSTION: SMOKE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:LANDFILL/INCINERATE IAW/FEDEDERAL, STATE & LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
SPOT & BLOT 68476-86-8
111-76-2
ADHESIVE 118N-NYLON GLUE 64-17-5
108-46-3
64-18-6
25038-54-4
TSX-3 1317-61-9
A 122 A SERIES PIGMENTS
SACBN001 BORAZON CBN 10043-11-5
3489 ENPLATE NI-426A CONCENTRATE 7732-18-5
7786-81-4
79-09-4
64-19-7
AR 409 ORANGE PEEL ADHESIVE REMOVER 5989-27-5
9016-45-9
ALUMNIGRIP LINEAR POLYURETHANE TOPCOAT 111-15-9
108-83-8
108-65-6
1330-20-7
G1004 ALUMNIGRIP LINEAR POLYURETHANE TOPCOAT 108-83-8
108-65-6
1330-20-7
111-15-9
574 & 575 VICTORY POLY GLOSS & SATIN 8052-41-3
GASOILA HARD-SET THREAD SEALANT 9000-59-3
67-56-1
1332-37-2
14807-96-6
112945-52-5
5183 DPM5949 FINISH W/BASE 111-76-2
25265-77-4
00-1566-00 CH-1-H CULLEX STRONG ACID CATION EXCHANGE RESIN 69011-20-7
7732-18-5
IMPACT LUBE
3476 ENPLATE NI-425A 7732-18-5
7786-81-4
3477 ENPLATE NI-425B 7732-18-5
7681-53-0
3479 ENPLATE NI-425C 7732-18-5
7681-53-0
1310-73-2
3479 ENPLATE NI-425D 7732-18-5
7681-53-0
1336-21-6
3480 ENPLATE NI-426A 7786-81-4
79-09-4
64-19-7
7732-18-5
3481 ENPLATE NI-426B 7681-53-0
1336-21-6
79-09-4
7732-18-5
3490 ENPLATE NI-426D 7681-53-0
1336-21-6
7732-18-5
3444 ENPLATE NI-426 STABILIZER 7732-18-5
1336-21-6
18229 SEALED NI-CAD BATTERIES & CELLS 7440-48-4
1310-58-3
T4605-1 1,3,5-TRIAZINE, 97% 290-87-9
35600 1,4-DICHLORO-2-BUTYNE 821-10-3
28620 CYANURIC CHLORIDE 108-77-0
LYE 1310-58-3
339-655 CMS,FLUSH SOLUTION CONCENTRATE 7647-14-5
9002-93-1
68424-85-1
7732-18-5
286-039 PO2 ELECTROLYTE SOLUTION 7558-79-4
7778-77-0
7447-40-7
8001-54-5
7732-18-5
427-572
D7505 2,2-DIPYRIDYL 366-18-7
05623 LIQUID ALKALINE RUST REMOVER 102-71-6
527-07-1
7732-18-5
1310-73-2
2738 ENPREP 576E 1310-73-2
112-34-5
7757-83-7
0402-0948 MEPERIDINE HYDROCHLORIDE INJECTION,USP,100 MG/ML 50-13-5
E450 ELMER'S SLIDE-ALL 75-28-5
76-13-1
109-66-0
110-54-3
BP229 1 GLYCERINE 56-81-5
TOOL BLACK 7783-00-8
10031-43-3
7697-37-2
7664-38-2
24938-91-8
7732-18-5
1100 ALUMINUM ALLOYS 7439-89-6
7440-50-8
7439-96-5
7440-66-6
7440-21-3
2014 ALUMINUM ALLOYS 7440-21-3
2017 ALUMINUM ALLOYS 7440-21-3
2024 ALUMINUM ALLOYS 7440-21-3
2117 ALUMINUM ALLOYS 7440-21-3
3003 ALUMINUM ALLOYS 7440-21-3
5052 ALUMINUM ALLOYS 7440-21-3
5056 ALUMINUM ALLOYS 7440-21-3
5086 ALUMINUM ALLOYS 7440-21-3
6061 ALUMINUM ALLOYS 7440-21-3
6063 ALUMINUM ALLOYS 7440-21-3
6262 ALUMINUM ALLOYS 7440-21-3
7075 ALUMINUM ALLOYS 7440-21-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net