===================== Product Identification =====================
MSDS NAME:DRY MOLY LUBRICANT 6080
NIIN:00-241-1314
MSDS Number: BDMMS
=== Responsible Party ===
Company:CROWN INDUSTRIAL PRODUCTS COMPANY
Address:STATE LINE ROAD
City:HEBRON
State:IL
ZIP:60034
Country:US
CAGE:92381
=== Contractor Identification ===
Company:CROWN INDUSTRIAL PRODUCTS CO
Address:HWY 47 N
Box:350
City:HEBRON
State:IL
ZIP:60034
Country:US
Phone:815-648-2424
CAGE:92381
============= Composition/Information on Ingredients =============
Name:ISOBUTANE
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: 15.0%
ACGIH TLV:N.A.
Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 15.0%
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9192
Name:METHYLENE CHLORIDE (SARA III)
CAS:75-09-2
RTECS #:PA8050000
Fraction by Wt: 65.0%
OSHA PEL:500 PPM/C,1000; Z2
ACGIH TLV:50 PPM, A2; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:TOTAL SULFUR
CAS:7704-34-9
RTECS #:WS4250000
Fraction by Wt: 1.0%
ACGIH TLV:N.A.
Name:MOLYBDENUM DISULFIDE
CAS:1317-33-5
RTECS #:QA4697000
Fraction by Wt: <3.0%
OSHA PEL:10 MG/M3 TDUST (MO)
ACGIH TLV:10 MG/M3 (MO); 8990
===================== Hazards Identification =====================
Effects of Overexposure:ANESTHESIA,DIZZINESS,SHORTNESS OF
BREATH,NARCOSIS,IRRITATION OF EYES OR SKIN,CARDIAC ARREST(HIGH CON
======================= First Aid Measures =======================
First Aid:INHALATION:REMOVE TO FRESH AIR.ADMINISTER ARTIFICIAL
RESPIRATION IF NECESSARY.CALL A DOCTOR.NEVER GIVE EPINEPHRINE OR
SIMILAR DRUGS.SKIN OR EYE CONTACT:FLUSH WELL WITH COPIOUS AMOUNTS
OF WATER.GET MED ICAL ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point:20F OR LESS.
Lower Limits:1.8
Upper Limits:9.5
Extinguishing Media:CARBON DIOXIDE;DRY CHEMICAL;FOAM
Unusual Fire/Explosion Hazard:TREAT AS CYLINDERS OF COMPRESSED GAS
================== Accidental Release Measures ==================
Spill Release Procedures:NORMAL CLEAN-UP WITH ABSORBENT SWEEPING
COMPOUND
====================== Handling and Storage ======================
Handling and Storage Precautions:AEROSOL CONTAINER:DO NOT STORE IN
DIRECT SUNLIGHT,NEAR OPEN FLAME OR RADIATORS,OR AT TEMPERATURES
ABOVE 120F.AVOID EXCESSIVE INHALATION
============= Exposure Controls/Personal Protection =============
Respiratory Protection:N.A.
Ventilation:AS REQUIRED TO CONTROL TLV IN AIR
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:V3
Boiling Pt:B.P. Text:104F
Vapor Pres:300
Vapor Density:>1.0
Spec Gravity:>1.0
Evaporation Rate & Reference:>1.0,BUTYL ACETATE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GREY-BLACK;CHLORINATED SOLVENT
Percent Volatiles by Volume:97.9
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID OPEN FLAME OR ELECTRIC SPARK SOURCES
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD SMALL
AMOUNTS OF HALOG.ACIDS
==================== Disposal Considerations ====================
Waste Disposal Methods:AEROSOL CONTAINER:DO NOT PUNCTURE OR
INCINERATE.WHEN LIQUID IS ALL EXPELLED,CONTINUE TO DEPRESS BUTTON
UNTIL GAS IS ALL EXPELLED
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|