=====================  Product Identification  =====================

MSDS NAME:DC SILICONE 200FL 30M VIS 40 PAIL
NIIN:00N073581
MSDS Number: CCNXG
=== Responsible Party ===
Company:ASHLAND CHEMICAL CO
Box:2219
City:COLUMBUS
State:OH
ZIP:43216
Country:US
Info Phone Num:614-790-3333
Emergency Phone Num:800-274-5263
CAGE:34897
=== Contractor Identification ===
Company:ASHLAND CHEMICAL CO
Box:2219
City:COLUMBUS
State:OH
ZIP:43216-2219
Country:US
Phone:614-790-3333/800-274-5263
CAGE:34897

=============  Composition/Information on Ingredients  =============

Name:POLY (DIMETHYLSILOXANE)
CAS:63148-62-9
RTECS #:JJ6484500
Fraction by Wt: 100%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE:MAY CAUSE MILD IRRITATION.
    SYMPTOMS MAY INCLUDE STINGING, TEARING, AND REDNESS. SKIN:CAUSES
    IRRITATION. SYMPTOMS MAY INCLUDE REDNESS, BURNING, AND SKIN DAMAGE.
    INGESTION:SINGLE DOSE ORAL TOX ICITY IS LOW. SWALLOWING SMALL
    AMOUNTS DURING NORMAL HANDLING IS NOT LIKELY TO CAUSE HARMFUL
    EFFECTS; (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:SWALLOWING LARGE AMOUNTS MAY BE
    HARMFUL. INHALATION:GASTROINTESTINAL IRRITATION (NAUSEA, VOMITING,
    DIARRHEA). CHRONIC:NONE LISTED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
    RESP) . EYES:MOVE INDIVIDUAL AWAY FROM EXPOS & INTO FRESH AIR.
    FLUSH GENTLY W/WATER FOR @ LST 15 MINS WHILE HOLDING EYELIDS APART.
    IF	SYMPS PERSIST/THERE IS ANY VISUAL DFCLTY, SEEK MED ATTN.
    SKIN:REMOVE CONTAMD CLTHG. WASH EXPOSED AREA W/SOAP & WATER. IF
    SYMPS PERSIST, SEEK MED ATTN. LAUNDER CLTHG BEFORE REUSE.
    INGEST:SEEK MED ATTN.  IF INDIVIDUAL IS DROWSY/UNCON, DO NOT GIVE
    ANYTHING BY MOUTH; PLACE INDIVIDUAL ON LEFT SIDE W/HEAD DOWN. IF
    INDIVIDUAL IS CONSCIOUS & ALERT, INDUCE VOMIT BY GIVING SYRUP OF
    IPECAC/BY GENTLY PLACING 2	FINGERS AT BACK OF THROAT. IF  (SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:610F,321C
Extinguishing Media:CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . WATER/FOAM MAY CAUSE FROTHING WHICH CAN BE VIOLENT &
    POSSIBLY ENDANGE LIFE OF FIREFIGHTER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL SPILL:COLLECT IN BEAKER. LARGE
    SPILL:PERSONS NOT WEARING PROTECTIVE EQUIPMENT SHOULD BE EXCLUDED
    FROM AREA OF SPILL UNTIL CLEAN-UP HAS BEEN COMPLETE. STOP SPILL AT
    SOURCE, DIKE AREA OF SPILL TO  PREVENT SPREADING, PUMP LIQUID TO
    SALVAGE TANK. REMAINING LIQUID MAY BE TAKEN UP ON SAND, CLAY,
    EARTH, FOOR ABSORBANT OR OTHER ABSORBANT MATERIAL & SHOVELED INTO
    CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CONTAINERS OF THIS MATERIAL MAY BE
    HAZARDOUS WHEN EMPTIED.
Other Precautions:SINCE EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES
    (VAPOR, LIQUID, AND/OR SOLID), ALL HAZARD PRECAUTIONS GIVEN IN MSDS
    MUST BE OBSERVED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE.
    NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE.
Protective Gloves:RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:WEAR NORMAL WORK CLOTHING COVERING ARMS &
    LEGS. ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AIR PROCEDURE: POSSIBLE, DO NOT LEAVE INDIVIDUAL UNATTENDED.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<5.0 @ 68F
Spec Gravity:0.970 @ 68F
Evaporation Rate & Reference:<1
Solubility in Water:NOT KNOWN
Appearance and Odor:WATER WHITE, CLEAR LIQUID. NO ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY FORM:CARBON DIOXIDE AND CARBON
    MONOXIDE, SILICATES, VARIOUS HYDROCARBONS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DEPOSIT IN A LANDFILL IN ACCORDANCE WITH LOCAL,
    STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***