=====================  Product Identification  =====================

MSDS NAME:ECCOTHERM TC-8M
NIIN:00N041537
MSDS Number: CCRDB
=== Responsible Party ===
Company:EMERSON & CUMING INC
Address:77 DRAGON COURT
City:WOBURN
State:MA
ZIP:01888
Country:US
Info Phone Num:617-828-3300
Emergency Phone Num:617-935-4850; 617-938-8630
CAGE:DO244
=== Contractor Identification ===
Company:EMERSON & CUMING INC
Box:UNKNOW
CAGE:0B262
Company:EMERSON & CUMING INC DIV/W R GRACE CO
Address:117 DRAGON COURT
City:AUOBURN
State:MA
ZIP:01888
Phone:(617) 935-4850 OR (617) 938-8630
CAGE:DO244

=============  Composition/Information on Ingredients  =============

Name:OTHER PRECS: SAFE HNDLG PROCEDURES SHOULD BE DEVELOPED BY
    PERSON KNOWLEDGEABLE IN INTENDED USAGE CNDTNS & EQUIP.(ING 14)
RTECS #:9999999ZZ

Name:ING 13: EMPLOYEES MUST BE PROPERLY TRAINED IN SAFE HANDLING
    OF THIS PRODUCT PRIOR TO USE.
RTECS #:9999999ZZ

Name:VENT: THE WORKER & PREVENT ROUTINE INHALATION. THIS IS
    NECESSARY ESPECIALLY DURING ELEVATED TEMPERATURE (ING 16)
RTECS #:9999999ZZ

Name:ING 15: PROCESSING. VENT MUST BE SUFFICIENT TO MAINTAIN
    AIRBORNE LEVELS OF INGREDIENTS BELOW THEIR PEL/TLV VALUES.
RTECS #:9999999ZZ

Name:OTHER PROT EQUIP: IMPERVIOUS CLOTHING SHOULD BE USED TO
    MINIMIZE SKIN CONTACT & PREVENT CONTAM OF CLOTHING. (ING 18)
RTECS #:9999999ZZ

Name:ING 17: NORMAL WORK CLOTHING SHOULD BE WASHED BEFORE REUSE.
RTECS #:9999999ZZ

Name:ALUMINUM OXIDE (2:3); (ALUMINUM OXIDE) (SARA 313)
CAS:1344-28-1
RTECS #:BD1200000
Fraction by Wt: 70-80%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Name:SILICONE RESIN
Fraction by Wt: 15-25%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:ZINC OXIDE (SARA 313) (CERCLA)
CAS:1314-13-2
RTECS #:ZH4810000
Fraction by Wt: 5-10%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Name:FIRST AID PROC: RESPIRATION IF NOT BREATHING. GET IMMED MED
    ATTN. INGEST: DILUTE BY GIVING PLENTY OF WATER TO (ING 5)
RTECS #:9999999ZZ

Name:ING 4: DRINK IF VICTIM IS CONSCIOUS & ALERT. NEVER GIVE
    ANYTHING BY MOUTH TO A DROWSY, UNCON OR CONVULSING (ING 6)
RTECS #:9999999ZZ

Name:ING 5: PERSON. GET IMMED ATTN.
RTECS #:9999999ZZ

Name:SPILL PROC: OTHER SIMILAR MATL. WASH AREA W/SOAPY WATER;
    AREA WILL BE SLIPPERY UNTIL CLEANED. COLLECT ABSORBED (ING 8)
RTECS #:9999999ZZ

Name:ING 7: MATL & WATER RINSES IN APPROP CNTNRS. LARGE SPILL:
    LIMIT ACCESS TO SPILL AREA. SHUT OFF SOURCE OF RELEASE (ING 9)
RTECS #:9999999ZZ

Name:ING 8:IF THIS CAN BE DONE W/OUT RISK OF INJURY. ACTIVATE
    AVAIL EXHST VENT SYSTEMS IN AREA. DIKE AREA TO CONTAIN (ING 10)
RTECS #:9999999ZZ

Name:ING 9: SPILL & PVNT RELEASES TO SEWERS OR OTHER WATERWAYS.
    COLLECT SPILLED MATL FOR SALVAGE/DISPOSAL. APPLY (ING 11)
RTECS #:9999999ZZ

Name:ING 10: ABSORB MATL TO SOAK UP RESIDUE. WASH AREA W/SOAPY
    WATER; AREA WILL BE SLIPPERY UNTIL CLEANED. PREVENT (ING 12)
RTECS #:9999999ZZ

Name:ING 11: RUNOFF FROM ENTERING WATERWAYS. TRANSFER ABSORBED
    MATL & WATER RINSES TO APPROPRIATE WASTE CONTAINERS.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT: CONTAINS MATLS IRRITATING
    TO EYES. SYMPTOMS MAY INCLUDE BLURRED VISION, BURNING SENSATION &
    TEARING. SKIN CONTACT: MAY CAUSE SLIGHT IRRITATION. INHAL: HEATING
    CAN GENERATE VAPORS THAT MAY  CAUSE RESP IRRITATION, NAUSEA &
    HEADACHES. INHAL HAZARD AT ROOM TEMPERATURE IS UNLIKELY DUE TO THE
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: LOW VOLATILITY OF THIS PROD. INGEST:
    HARMFUL IF SWALLOWED. CHRONIC: EXPOSURE TO THE FILLER MATL LISTED
    IN INGREDIENTS IS UNLIKELY TO OCCUR UNLESS THE PROD IS APPLIED IN A
    MANNER WHICH RESULT S IN THE GENERATION OF MISTS OR FUMES OR WHEN
    MACHINING OF THE CURED PROD RESULTS IN GENERATION OF DUST
    PARTICLES.
Medical Cond Aggravated by Exposure:NO DATA IS AVAILABLE FOR THIS
    PRODUCT MIXTURE.

=======================  First Aid Measures  =======================

Eyes: FLUSH EYES THOROUGHLY W/WATER FOR AT LEAST 15 MIN WHILE
    HOLDING EYELIDS OPEN. GET MED ATTN. SKIN: REMOVE ANY CONTAMD CLTHG
    & FLUSH AFFECTED AREA OF SKIN THOROUGHLY W/PLENTY OF WATER. FOLLOW
    BY W ASHING W/SOAP & WATER. GET MED ATTN IF IRRIT PERSISTS. DO NOT
    REUSE CONTAMD CLTHG UNTIL PROPERLY CLEANED. INHAL: REMOVE TO FRESH
    AIR. PROVIDE OXYGEN IF BREATHING IS DIFFICULT. GIVE ARTIFICIAL (ING
    4)

=====================  Fire Fighting Measures  =====================

Flash Point:>200F,>93C
Extinguishing Media:USE CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP . COOL
    EXPOSED CNTNRS W/WATER TO PREVENT PRESS BUILDUP. IF LARGE QTYS OF
    MATL ARE INVOLVED, EVACUATE AREA (SUPDAT)
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
    BE TOXIC. CLOSED CONTAINERS MAY VIOLENTLY RUPTURE UNDER FIRE
    CONDITIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SPILL RESPONSE OPERATIONS MUST BE CONDUCTED
    I/A/W OSHA 29 CFR 1910.120. REVIEW ENTIRE MSDS BEFORE PROCEEDING
    W/SPILL RESPONSE. SM SPILLS: ACTIVATE AVAIL EXHST VENT EQUIP IN
    IMMED SPILL AREA. WIPE UP O R ABSORB SPILLED MATL W/VERMICULITE OR
    (ING 7)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY LOCATION
    W/ADEQUATE VENTILATION. KEEP CONTAINER TIGHTLY SEALED WHEN NOT IN
    USE. KEEP AWAY FROM OPEN FLAMES AND HEAT SOURCES.
Other Precautions:CONSULT PROD TECHNICAL BULLETIN FOR DETAILED STORAGE
    INFO. RECOMS DESCRIBED IN HNDLG PRECS ARE PROVIDED AS GEN GUIDANCE
    FOR MINIMIZING EXPOS WHEN HNDLG PROD. BECAUSE USAGE CNDTNS VARY
    DEPENDING ON CUS TOMER APPLICATN, SPECIFIC (ING 13)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE AN APPROP, PROPERLY FITTED, NIOSH APPRVD
    RESPIRATOR IF EXPOS EXCEED PEL/TLV VALUES. THE TYPE OF PROT
    SELECTED (SCBA, AIR-PURIFYING, ETC) WILL DEPEND UPON THE CNDTNS OF
    USE. OBSERVE OSHA REGS FOR R ESPIRATORY PROTECTION (29CFR
    1910.134).
Ventilation:PROVIDE EFFECTIVE MECHANICAL EXHAUST VENT TO DRAW VAPS,
    MISTS OR FUMES GENERATED DURING PROCESSING AWAY FROM (ING 15)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . IF
    NECESSARY, A PROPER CHEMICAL-RESISTANT APRON & ADDITIONAL (ING 17)
Work Hygienic Practices:WASH HANDS & FACE THOROUGHLY AFTER HANDLING
    THIS PRODUCT AND BEFORE EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
SPEC GRAV: 2.45-2.55 (H*2O=1). VP: NEGLIGIBLE @ 25C. % VOLAT:
    NEGLIGIBLE (WT). FIRE FIGHT PROC: & FIGHT FIRE FROM A SAFE
    DISTANCE. CNDTNS TO AVOID: AGENTS OR EXPOS TO INCOMPATIBLE
    SUBSTANCES. HAZ DECO MP PRODS: DURING COMBUST. THE CHEM NATUR & QTY
    OF DECOMP BY-PRODS WILL VARY WIDELY DEPENDING ON CONDITIONS OF
    COMBUST.

==================  Physical/Chemical Properties  ==================

Vapor Pres:SUPDAT
Spec Gravity:SUPDAT
Solubility in Water:INSOLUBLE
Appearance and Odor:OFF-WHITE LIQUID/PASTE.
Percent Volatiles by Volume:SUPDAT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
INCOMPATIBLE WITH STRONG OXIDIZERS, ACIDS, BASES.
Stability Condition to Avoid:AVOID STORAGE IN OPEN CNTNRS, EXPOS TO
    OPEN FLAME OR UNCONTROLLED EXPOS TO HEAT, UNCONTROLLED MIXING
    W/CURING (SUPDAT)
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
    OXIDES OF SILICON, ZINC & ALUMINUM & OTHER ORGANIC SUBSTANCES MAY
    BE FORMED (SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
    LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***