===================== Product Identification =====================
MSDS NAME:DX77 FISH EYE PREVENTER
NIIN:00F052342
MSDS Number: CDBKS
=== Responsible Party ===
Company:PPG INDUSTRIES INC COATINGS & RESINS GROUP
Address:4325 ROSANNA DR
Box:9
City:ALLISON PARK
State:PA
ZIP:15101-5000
Country:US
Info Phone Num:412-492-5555
Emergency Phone Num:304-843-1300
CAGE:DO542
=== Contractor Identification ===
Company:PPG INDUSTRIES INC. COATINGS & RESINS GP
Address:4325 ROSEANNA DR PO BOX 9
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Phone:412-492-5555
CAGE:DO542
============= Composition/Information on Ingredients =============
Name:XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *96-3*
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 95-100%
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:FILM FORMERS, RESINS, AND ADDITIVES
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYES: CAUSES
IRRITATION. SKIN: MODERATE IRRITANT. INHALATION: HARMFUL. VAPOR
IRRITATES EYES, NOSE & THROAT. MAY CAUSE IRRITATION OF THE
RESPIRATORY SYSTEM, CAUSE PERMANENT BR AIN & NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, EYE WATERING, HEADACHES, NAUSEA,
DIZZINESS, LOSS OF COORDINATION, REDNESS, ITCHING, BURNING
SENSATION, VISUAL DISTURBANCES, DRYNESS/CRACKING/SWELLING OF SKIN
======================= First Aid Measures =======================
First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
W/PLENTY OF WATER FOR 15 MINS. SKIN: FLUSH IMMEDIATELY W/PLENTY OF
WATER FOLLOWED BY WASHING W/SOAP & WATER. INHALATION: REMOVE TO
FRESH AIR. APPLY CPR & OTHER SUPPORTIVE MEASURES. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:80F
Lower Limits:1.1
Extinguishing Media:CO2, DRY CHEMICAL/UNIVERSAL AQUEOUS FILM FORMING
FOAM DESIGNED TO EXTINGUISH FLAMMABLE LIQUID FIRES.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, WATER SPRAY
MAY BE USED TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG
NOZZLES ARE PREFERRED. WEAR SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. ISOLATE FROM HOT SURFACES/IGNITION
SOURCES. TOXIC GASES MAY FORM. KEEP CONTAINERS TIGHTLY CLOSED.
================== Accidental Release Measures ==================
Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PROPERLY
EQUIPPED PERSONNEL SHOULD BE PERMITTED IN THE AREA. REMOVE ALL
IGNITION SOURCES. TAKE UP W/SAWDUST, VERMICULITE/OTHER ABSORBENT
MATERIAL & PLACE INTO CONTAIN ERS FOR DISPOSAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS IB FLAMMABLE LIQUIDS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
FREE FALL OF LIQUIDS IN EXCESS OF A FEW INCHES. INTENTIONAL MISUSE
BY DELIBERATELY CONCENTRATING & INHALING THE CONTENTS CAN BE
HARMFUL/FATAL.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED (TC-23C) AIR
PURIFYING/AIR SUPPLIED (TC-19C) RESPIRATORS. READ INSTRUCTIONS TO
DETERMINE WHICH RESPIRATOR IS EFFECTIVE & HOW IT IS FITTED.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST TO KEEP CONCENTRATION
1
Spec Gravity:0.87
Evaporation Rate & Reference:(BU O AC=100): 63
Solubility in Water:0%
Appearance and Odor:NON-VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF THE
SOLVENTS
Percent Volatiles by Volume:99.1
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS/STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, ELECTRICAL EQUIPMENT, SPARKS, OPEN
FLAMES, HOT SURFACES & OTHER IGNITION SOURCES
Hazardous Decomposition Products:WHEN HEATED: CO
==================== Disposal Considerations ====================
Waste Disposal Methods:EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY. DISPOSE OF
IAW/LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|