=====================  Product Identification  =====================

MSDS NAME:P103337 (CONTAINS AROCHLOR 1016)
NIIN:00-086-2688
MSDS Number: CDGNF
=== Responsible Party ===
Company:MONSANTO CO
Address:800 N LINDBERGH BLVD
City:SAINT LOUIS
State:MO
ZIP:63167
Country:US
Info Phone Num:800-332-3111
Emergency Phone Num:314-694-4000 (CALL COLLECT)
Preparer's Name:JOHN H. CRADDOCK
CAGE:76541
=== Contractor Identification ===
Company:AEROVOX INC.
Address:740 BELLEVILLE AVE
Box:City:NEW BEDFORD
State:MA
ZIP:02745-6010
Country:US
Phone:508-994-9661 / 508-994-9635
CAGE:00656
Company:MONSANTO COMPANY
Address:800 N LINDBERGH BLVD
Box:City:SAINT LOUIS
State:MO
ZIP:63167
Country:US
Phone:314-694-6661 OR 800-332-3111
CAGE:76541

=============  Composition/Information on Ingredients  =============

Name:AROCHLOR SERIES 1016 (POLYCHLORINATED BIPHENYLS) (PCBS)
    (SARA III)
CAS:1336-36-3
RTECS #:TQ1350000
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:ACUTE: LIQUID CONTACT/VAPOR EXPOSURE
    MAY CAUSE EYE IRRITATION. SLIGHTLY TOXIC IF INGESTED. SKIN
    ABSORPTION MAY BE HARMFUL. SKIN CONTACT MAY CAUSE DRYING &
    CRACKING, CLORACNE. INHALATION MAY CAUSE LIVE R INJURY. CHRONIC:
    EXPOSURE BY ANY ROUTE MAY CAUSE LIVER INJURY AFTER
    PROLONGED/REPEATED EXPOSURE.
Explanation of Carcinogenicity:PCB'S ARE LISTED AS SUSPECT CARCINOGENS
    BY NTP & IARC (PER MFR MSDS).
Effects of Overexposure:EYES-IRRITATION. SKIN-DRYING, CRACKING.
    INHALED-LIVER INJURY. INGESTED-NONE STATED BY MFR.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:IN ALL CASES GET MEDICAL ATTENTION. EYES-FLUSH WITH WATER FOR
    15 MINUTES. SKIN-REMOVE CONTAMINATED CLOTHES. WASH WITH MILD SOAP &
    WATER. INHALED-REMOVE TO FRESH AIR. ADMINISTER OXYGEN OR ARTIFICIAL
    RE SPIRATION AS NEEDED. INGESTED-CONSULT APHYSICIAN. DO NOT INDUCE
    VOMITING OR GIVE ANY OILY LAXATIVE. NOT TO PHYSICIAN: IF LARGE
    AMOUNTS ARE INGESTED, GASTRIC LAVAGE IS SUGGESTED.

=====================  Fire Fighting Measures  =====================

Flash Point:338F,170C
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS: USE
    EXTINGUISHING AGENTS USED FOR OIL-TYPE FIRES.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
    FULL FIRE FIGHTER'S PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:PCB'S ARE FIRE-RESISTANT COMPOUNDS. THEY
    MAY FORM COMBUSTION PRODUCTS IF EXPOSED TO FLAME OR HOT SURFACES;
    THEY MAY FORM: PHENOLICS, ALDEHYDES, PCDF'S.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE,ISOLATE & DENY ENTRY.VENTILATE
    AREA.CONTAIN SPILL.KEEP OUT OF SURFACE WATERS,SEWERS.REMOVE BY
    ABSORPTIVE MATERIAL OR TRAPPED & REMOVED BY PUMPING OR OTHER
    SUITABLE MEANS.ONLY PEOPLE TRAINED I N PCB EMERGENCY PROCEDURES &
    WITH PPE SHOULD CLEAN
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. CARE
    SHOULD BE TAKEN TO PREVENT ENTRY INTO THE ENVIRONMENT THROUGH
    SPILLS, LEAKAGE, USE, VAPORIZATION OR DISPOSAL.
Other Precautions:AVOID PROLONGED BREATHING OF VAPORS OR MISTS. AVOID
    CONTACT WITH EYES OR PROLONGED CONTACT WITH SKIN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
    OR AN EMERGENCY OCCURS; WEAR AN MSHA/NIOSH APPROVED RESPIRATOR OR
    AN AIR-SUPPLIED RESPIRATOR OR SCBA, AS REQUIRED. USE IAW 29 CFR
    1910.134.
Ventilation:DLA-HMIS: USE ADEQUATE MECHANICAL VENTILATION OR LOCAL
    EXHAUST TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:RUBBER.
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:FULL CLOTHING TO PREVENT SKIN CONTACT.
    DLA-HMIS: EYE WASH STATION & SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
    DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:T6
Spec Gravity:1.373
Viscosity:71-81SUS@100F
Appearance and Odor:MOBIL OIL.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
    HYDROGEN CHLORIDE, PHENOLICS, ALDEHYDES, POLYCHLORINATED
    DIBENZOFURANS (PCDF).

====================  Disposal Considerations  ====================

Waste Disposal Methods:ALL WASTES & RESIDUES CONTAINING PCB'S SHOULD BE
    COLLECTED, PLACED IN PROPER CONTAINERS, MARKED & DISPOSED OF IN THE
    MANNER PRESCRIBED BY EPA REGULATIONS (40 CFR 761) AND APPLICABLE
    STATE & LOCAL REGU LATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***