=====================  Product Identification  =====================

MSDS NAME:ERSIN LIQUID FLUX,366A-25
NIIN:00-260-7719
Kit Part:Y
MSDS Number: BDPMQ
=== Responsible Party ===
Company:AUTOMATED PRODUCTION EQUIPMENT CORP
Emergency Phone Num:516-654-1197
CAGE:57216
=== Contractor Identification ===
Company:AUTOMATED PRODUCTION EQUIPMENT CORP
Address:142 PECONIC AVE
Box:City:MEDFORD
State:NY
ZIP:11763-3260
Country:US
Phone:516-654-1197
CAGE:57216

=============  Composition/Information on Ingredients  =============
Fraction by Wt: 21%
Fraction by Wt: 4%

Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 37.5%
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

Name:METHYL ALCOHOL (METHANOL)  (SARA III)
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: 37.5%
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:INHAL:IRRIT TO RESPIRATORY ORGANS.SKIN:IRRIT
    AND CAN BE ABSORBED GIVING TOXIC EFFECTS.

=======================  First Aid Measures  =======================

First Aid:SKIN:WASH WITH SOAP AND WARM WATER.EYE:FLUSH IMMEDIATELY WITH
    WATER FOR AT LEAST 15 MINUTES AND OBTAIN MEDICAL
    ATTENTION.INHALATION:REMOVE TO FRESH AIR AND OBTAIN MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:53F,12C ABEL CC
Lower Limits:4
Upper Limits:24
Extinguishing Media:CARBON DIOXIDE,FOAM,DRY POWDER
Fire Fighting Procedures:DO NOT USE WATER
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:EXTINGUISH NAKED FLAMES.ABSORB ON INERT
    MATERIAL(EG SAND OR EARTH)AND COLLECT IN CLOSED CONTAINERS FOR
    SUBSEQUENT DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID INHALING VAPORS.AVOID CONTACT
    WITH SKIN AND EYES.STORE IN A COOL DRY AREA AWAY FROM SOURCES OF
    IGNITION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED PER MFR
Ventilation:LOCAL EXHAUST AT POINT OF SOLDERING.MECH(GEN)WELL VENT AREA
Protective Gloves:PLASTIC,RUBBER
Eye Protection:GOGGLES OR FACE SHIELD
Supplemental Safety and Health
MSDS PREP:14MAY84.BP:65-82C.CALL MFR FOR RESPIRATORY
    PROTECTION,APPEARANCE AND TEL NO.THIS PRODUCT IS PART A OF A 4 PART
    KIT.PARTS B-D ARE NOT HAZARDOUS.

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:=65.C, 149.F
B.P. Text:149-180F
Vapor Pres:79
Vapor Density:2.07
Spec Gravity:0.8550
Evaporation Rate & Reference:2.7(BUTYL ACETATE)
Solubility in Water:PARTIALLY
Appearance and Odor:AMBER COLOR LIQUID,SLIGHT ALCOHOL ODOR.
Percent Volatiles by Volume:81.0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Hazardous Decomposition Products:ACRID IRRITATING FUMES IN THE EVENT OF
    FIRE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONTROLLED INCINERATION IN ACCORDANCE WITH
    LOCAL,STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***