===================== Product Identification =====================
MSDS NAME:SILICA GEL, GRADE H, TYPE 2
NIIN:00-260-6299
MSDS Number: BDPMM
=== Responsible Party ===
Company:W.R.GRACE & CO
Emergency Phone Num:301-659-9058
CAGE:KO919
=== Contractor Identification ===
Company:W R GRACE & CO. DAVISON CHEMICAL DIVISION
Address:10 E BALTIMORE STREET
Box:2117
City:BALTIMORE
State:MD
ZIP:21202-1630
Country:US
Phone:410-659-9000
CAGE:16210
Company:W.R.GRACE & CO
CAGE:KO919
============= Composition/Information on Ingredients =============
Name:SILICA, AMORPHOUS, PRECIPITATED AND GEL
CAS:7699-41-4
RTECS #:VV8850000
Fraction by Wt: 99.0%
OSHA PEL:20 MPPCF
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:UNIDENTIFIED COMPONENTS
Fraction by Wt: 01.0%
===================== Hazards Identification =====================
Effects of Overexposure:DRYING ACTION OF MATL CAN IRRIT OF MUCOUS
MEMBRANE OF NOSE,THROAT,& SKIN.NO OTHER HEALTH HAZ KNOWN.
======================= First Aid Measures =======================
First Aid:SKIN:WASH W.SOAP & H*2O. EYES:FLUSH W. H*2O. INGESTED:DON'T
INDUCE VOMITING. INHALED:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
NEED. KEEP WARM & QUIET. REMOVE CONTAMINATED CLOTHING. NEVER GIVE
ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:EXTINGUISH WITH AGENT SUITABLE FOR SURROUNDING FIRE
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.
================== Accidental Release Measures ==================
Spill Release Procedures:USE APPROPRIATE PROTECTIVE EQUIPMENT IF NEEDED
DURING CLEAN UP PROCEDURES; SWEEP OR VACUUM UP DRY MATERIAL & PLACE
IN COVERED CONTAINER.FLUSH AREA WITH LG QTY OF WATER. SM SPILLED
QTY MAY BE FLUSHED T O SEWER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTNRS CLOSED TIGHTLY TO AVOID
MOISTURE ABSORPTION BEFORE USE.MOISTURE PICKUP WILL AFFECT QUALITY.
Other Precautions:AVOID HEATING OVER 600F AS THIS WILL AFFECT PRODUCT
QUALITY.KEEP WORKPLACE BELOW TLV LIMITS.IF PARTICLE COUNT EQUIP IS
NOT AVAILBLE,OBSERVE AS MAX OF NUISANCE DUST' LIM 10MG/CUM *SEE
SUPP DATA
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR NIOSH APPRVD DUST RESPIRATOR IF DUSTY
CONDITIONS PREVAIL
Ventilation:NORMAL VENTILATION
Protective Gloves:COTTON
Eye Protection:GOGGLE TO AVOID DUST
Other Protective Equipment:WEAR LONG SLEEVE/CLOSE-WEAVE COTTON GLOVES W
WRISTLETS.
Supplemental Safety and Health
MSDS FROM W.R.GRACE DATED:11/25/85; PH IN 5% SLURRY:3.5 TO 8.5
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:2.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DRY WHITE GRANULES.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
HYDROFLUORIC ACID
Stability Condition to Avoid:NOT KNOWN
Hazardous Decomposition Products:UNK
==================== Disposal Considerations ====================
Waste Disposal Methods:MATL COLLECTED IN CONTAINER CAN BE SHIPPED TO A
LANDFILL FOR DISPOSAL IAW LOCAL,STATE & FED REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|