=====================  Product Identification  =====================

MSDS NAME:PENETRATING OIL 597D (VV-P-216B TYPE 1)
NIIN:00-261-7899
MSDS Number: BDPPD
=== Responsible Party ===
Company:NATIONWIDE INDUSTRIES CORP.
Address:501 S BASINGER RD
City:PANDORA
State:OH
ZIP:45877-9749
Country:US
Emergency Phone Num:419-384-3241
CAGE:6T203
=== Contractor Identification ===
Company:NATIONWIDE INDUSTRIES INC
Address:501 S BASINGER RD
Box:City:PANDORA
State:OH
ZIP:45877-9749
Country:US
CAGE:6T203

=============  Composition/Information on Ingredients  =============

Name:PETROLEUM (CRUDE OIL), (OSHA PEL IS FOR PETROLEUM
    DISTILLATE AND ACGIH TLV IS FOR RUBBER SOLVENT)
CAS:8002-05-9
RTECS #:SE7175000
Fraction by Wt: 71%
OSHA PEL:400 PPM
ACGIH TLV:400 PPM; 8990

Name:MINERAL OIL
Fraction by Wt: 25%
ACGIH TLV:5MG/CUM

Name:ORTHODICHLOROBENZENE,CAS#30560-19-1
CAS:30560-19-1
RTECS #:TB4760000
Fraction by Wt: 3%
ACGIH TLV:50PPM(MFR)

Name:PHENOL
CAS:108-95-2
RTECS #:SJ3325000
Fraction by Wt: 1%
OSHA PEL:S, 5 PPM
ACGIH TLV:S, 5 PPM; 8990
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:SKIN:DRYING,DERMAT,DEFAT;INH:NO KNOWN
    ADVERS.EFFECTS,BUT AVOID IT;ASPIR.OF LIQ.IN LUNG:PNEMONITIS

=======================  First Aid Measures  =======================

First Aid:INHAL:RMV TO FRESH AIR. IF NOT BRTHNG GIVE CPR; IF BRTHNG
    DIFF GIVE OXYGEN. EYE:IMMED FLUSH W/PLENTY OF WATER. SKIN: WASH
    W/SOAP & WATER. RMV CONTAM CLTHG & SHOES. INGEST:DO NOT INDUCE
    VOMIT. NOTHG BY  MOUTH IF UNCONSC. GET MEDICAL ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point:125F,52C,TOC
Lower Limits:1
Upper Limits:9
Extinguishing Media:CO2, FOAM, DRY CHEM.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H20 SPRAY TO COOL
    CONTR.
Unusual Fire/Explosion Hazard:MATLS MAY BURN.EXPL CONCS OF GAS MAY
    ACCUMULATE IN TANKS.MAY IGNITE COMBUSTIBLES. REACTS W H20.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE SOURCES OF IGN.STOP RELEASE OF OIL.
    SMALL SPILLS CAN BE RECOVERED BY MOPPING,VACUUMING,OR WITH INERT
    ABSORBENT MATERIAL.DIKE UP LARGE SPILLS AND PUMP INTO SALVAGE
    TANK.REMAINING LIQ.CAN BE ABSO RBED IN INERT MTL & SHOVELED INTO
    DISPOSAL CONTAIN

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY WELL VENTED LOW FIRE
    RISK AREA. PROTECT FROM HEAT,SHOCK,FRICTION. KEEP CONTAINERS
    CLOSED.AVOID EXTREME TEMPS IN STORAGE.
Other Precautions:CONTAINER MAY BE HAZ WHEN EMPTIED,SINCE CONTAINERS
    RETAIN PRODUCT RESIDUES(VAPOR,LIQUID AND/OR SOLIDS).PRACTICE GOOD
    PERSONAL HYGIENE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY NEEDED.NIOSH APPVD RESP.IF TLV IS
    EXCEEDED.
Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN