=====================  Product Identification  =====================

MSDS NAME:PENETRATING OIL
NIIN:00-261-7899
MSDS Number: BDPPC
=== Responsible Party ===
Company:NATIONWIDE INDUSTRIES CORP
Address:501 S BASINGER RD
City:PANDORA
State:OH
ZIP:45877-9749
Country:US
Emergency Phone Num:419-384-3241
CAGE:6T203
=== Contractor Identification ===
Company:NATIONWIDE INDUSTRIES INC
Address:501 S BASINGER RD
Box:City:PANDORA
State:OH
ZIP:45877-9749
Country:US
CAGE:6T203

=============  Composition/Information on Ingredients  =============

Name:PETROLEUM DISTILLATES (NAPHTHA OR RUBBER SOLVENT)
CAS:8002-05-9
RTECS #:SE7449000
Fraction by Wt: 70.6%
OSHA PEL:400 PPM
ACGIH TLV:400 PPM; 8990

Name:MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS:8012-95-1
RTECS #:PY8030000
Fraction by Wt: 19.5%
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3/10 STEL;9192

Name:NAPTHENIC OIL(300 SUS VISCOSITY AT 100F)
Fraction by Wt: 05.5%
ACGIH TLV:5MG/CUM (MIST)

Name:O-DICHLOROBENZENE  (SARA III)
CAS:95-50-1
RTECS #:CZ4500000
Fraction by Wt: 02.5%
OSHA PEL:C 50 PPM
ACGIH TLV:S, 25PPM/50 STEL9394
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Name:PHENOL
CAS:108-95-2
RTECS #:SJ3325000
Fraction by Wt: <1.0%
OSHA PEL:S, 5 PPM
ACGIH TLV:S, 5 PPM; 8990
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:NONE NOTED BY MFR. LOW TOXICITY & LOW HAZARD TO
    HEALTH.

=======================  First Aid Measures  =======================

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O2 IF
    NEED;EYES/SKIN:FLUSH W LG AMTS H2O FOR 15 MIN;INGEST:RINSE MOUTH;
    GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
    SYMPTOMS OF OVEREXPOSURE.

=====================  Fire Fighting Measures  =====================

Flash Point:115F/46C (COC)
Extinguishing Media:CO2, FOAM, DRY CHEM.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H20 SPRAY TO COOL
    CONTR.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE IGNITION SOURCES,VENTILATE AREA WELL.
    ABSORB WITH VERMICULITE OR OTHER MATERIALS, SUCH AS
    SAWDUST,RAGS,PAPER & PLACE IN CLOSED CONTAINER. USE NON SPARKING
    TOOLS. WEAR PROPER PROTECTIVE EQUIPMEN T DURING CLEAN UP.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
    AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT. KEEP
    CONTAINERS TIGHTLY CLOSED
Other Precautions:AVOID BREATHING OIL MIST & SKIN CONTACT; LAUNDER
    CONTAMINATED CLOTHING BEFORE REUSE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
    VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Supplemental Safety and Health
MSDS FM NATIONWIDE INDUSTRIES NOT DATED; SPEC REF: VV-P-216C, TYPE I;
    FORMULA CHG; THIS ALSO CONTAINS: PETROLEUM SULFONATE: 1.0%, MOSS
    GREEN DYE: 0.01%, & NEUTROLEUM GUM: 0.02%-SEE ADDL DATA FOR MORE. 
    KEY1:F4

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:315F/157C
Spec Gravity:0.83
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR,MOSS GREEN COLOR.
Percent Volatiles by Volume:72

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:THERMAL DECOMPOSITION WILL EMIT OXIDES
    OF C, S & CHLORINE COM

====================  Disposal Considerations  ====================

Waste Disposal Methods:ELIMINATE IGNITION SOURCES. DESTROY BY LIQUID
    INCINERATION. INCINERATION WILL BE EASIER BY MIXING WITH A MORE
    FLAMMABLE SOLVENT. HANDLE & DISPOSE IN FULL COMPLIANCE WITH ALL
    APPLICABLE INTERNATIONAL,F ED,STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***