=====================  Product Identification  =====================

MSDS NAME:75 METHYLTHYNOL BLUE 96% UV-VIS 05614
NIIN:00F053538
MSDS Number: CDSNC
=== Responsible Party ===
Company:JANSSEN PHARMACEUTICAIAAN 3
Address:2440
City:GEAL
Country:US
Info Phone Num:800-227-6701
Emergency Phone Num:800-227-6701
CAGE:GO500
=== Contractor Identification ===
Company:JANSSEN PHARMACEUTICAIAAN 3
Address:2440
City:GEAL
Country:US
Phone:800-227-6701
CAGE:GO500

=============  Composition/Information on Ingredients  =============

Name:METHYLTHYMOL BLUE, PENTASODIUM SALT
CAS:4310-80-9
Fraction by Wt: 96%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Explanation of Carcinogenicity:NONE

=======================  First Aid Measures  =======================

Eyes: FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN: FLUSH
    W/PLENTY OF SOAP & WATER FOR 15 MINS. INGESTION: IF CONSCIOUS &
    ALERT, GIVE 2-4 CUPFULS OF MILK/WATER. INHALATION: REMOVE TO FRESH
    AIR IMMEDIATEL Y. IF NOT BREATHING, GIVE CPR/OXYGEN IFNEEDED.
    OBTAIN MEDICAL ATTENTION IN ALL CASES. NOTES TO PHYSICIAN: TREAT
    SYMPTOMATICALLY.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:USE AGENT MOST APPROPRIATE TO EXTINGUISH FIRE.
Fire Fighting Procedures:WEAR SCBA IN PRESSURE DEMAND, MSHA/NIOSH
    APPROVED/EQUIVALENT & FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:DURING A FIRE, IRRITATING & HIGHLY TOXIC
    GASES MAY BE GENERATED BY THERMAL DECOMPOSITION/COMBUSTION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE PROPER PERSONAL PROTECTIVE EQUIPMENT.
    CLEAN UP IMMEDIATELY, OBSERVING PRECAUTIONS IN THE PROTECTIVE
    EQUIPMENT AREA.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. KEEP
    CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:AVOID CONTACT W/EYES, SKIN & CLOTHING. AVOID
    INGESTION & INHALATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:A RESPIRATORY PROTECTIVE PROGRAM THAT MEETS OSHA
    & ANSI Z88.2 REQUIREMENTS MUST BE FOLLOWED WHENEVER WORKPLACE
    CONDITIONS WARRANT A RESPIRATOR'S USE.
Ventilation:USE PROCESS ENCLOSURE, LOCAL EXHAUST/OTHER ENGINEERING
    CONTROLS TO CONTROL AIRBORNE LEVELS.
Protective Gloves:PROTECTIVE
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
USE APPROPRIATE PROCEDURES TO PREVENT DIRECT CONTACT W/SKIN, EYES &
    INHALATION.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
INCOMPATIBLE MATERIALS, STRONG OXIDANTS.
Hazardous Decomposition Products:THERMAL COMBUSTION: IRRITATING, TOXIC
    FUMES & GASES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***