=====================  Product Identification  =====================

MSDS NAME:HIGH PERFORMANCE WOOD FILLER (PASTE)
NIIN:00N046125
MSDS Number: CFNXT
=== Responsible Party ===
Company:MINWAX CO INC
Address:15 MERCEDES DR
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Info Phone Num:201-573-5700
Emergency Phone Num:201-391-0253
CAGE:HO333
=== Contractor Identification ===
Company:MINWAX CO INC
Address:15 MERCEDES DR
Box:City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-391-0253
CAGE:HO333
Company:MINWAX COMPANY
Address:10 MOUNTAINVIEW ROAD
Box:City:UPPER SADDLE RIVER
State:NJ
ZIP:07458
Country:US
Phone:800-523-9299/216-566-2917
CAGE:0K1A4

=============  Composition/Information on Ingredients  =============

Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 20-30%
OSHA PEL:20 MPPCF Z-3
ACGIH TLV:2 MG/M3 RDUST

Name:CALCIUM CARBONATE
CAS:1317-65-3
RTECS #:EV9580000
Fraction by Wt: 20-30%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Name:STYRENE (SARA 313)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 10-20%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM/100 STEL, S
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:METHACRYLIC ACID, DIESTER WITH TRIETHYLENE GLYCOL;
    (POLYESTER RESIN)
CAS:109-16-0
RTECS #:OZ4100000
Fraction by Wt: 20-30%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IRRITATING TO ALL PARTS OF
    RESPIRATORY TRACT AND SOMEWHAT ANESTHETIC. VAPOR HARMFUL. HARMFUL
    IF SWALLOWED.
Explanation of Carcinogenicity:STYRENE: IARC MONOGRAPHS, VOLUME 7, PAGE
    345, 1987: GROUP 2B. ANIMAL: NERVOUS SYSTEM.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGESTION: DO NOT INDUCE VOMITING. CALL MD IMMEDIATELY. SKIN:
    WASH THOROUGHLY WITH SOAP AND WATER. INHALATION: REMOVE TO FRESH
    AIR. IF SKIN IRRITATION OR INHALATION EFFECTS PERSIST GET MEDICAL
    ATTENTI ON. EYES: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
    MINUTES AND GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:89.0F,31.7C
Lower Limits:1.1%
Upper Limits:2.0%
Extinguishing Media:FOAM, CARBON DIOXIDE, OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . WATER IS NOT NORMALLY AN EFFECTIVE EXTINGUISHING AGENT.
Unusual Fire/Explosion Hazard:PRODUCT WILL POLYMERIZE READILY AT
    ELEVATED TEMPERATURES SUCH AS FIRE CONDITIONS. IF THIS OCCURS IN
    CLOSED CONTR, THERE IS A POSSIBILITY OF VIOLENT RUPTURE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT TAKE INTERNALLY. AVOID CONTACT
    WITH EYES AND SKIN. KEEP CAP ON HARDENER AT ALL TIMES. REPLACE PLUG
    IN CAN AFTER EACH USE. STORE IN COOL AREA.
Other Precautions:USE IN WELL-VENTILATED AREA. KEEP OUT OF REACH OF
    CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT APPLICABLE. USE NIOSH APPROVED RESPIRATOR
    APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:PROVIDE POSITIVE AIR MOVEMENT.
Protective Gloves:NEOPRENE RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>293F,>145C
Vapor Density:>1
Spec Gravity:1.90 
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:NIL
Appearance and Odor:TAN PASTE
Percent Volatiles by Volume:15

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, PEROXIDES AND OTHER OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE AND DIOXIDE, LOW
    MOLECULAR WEIGHT HYDROCARBONS.
Conditions to Avoid Polymerization:OPEN FLAMES, CONTAMINATION, AND
    PROLONGED STORAGE ABOVE 110F.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***