Search   
MSDS  
:
 LMCRS-2, ASPHALT EMULSION ANIONIC/CATIONIC(SUPDAT)
CAS  
:
 8052-42-4
NAME  
:
 asphalt (petroleum)
supdat:as may occur w/road work, can incr sensitivity to
ing 2:hygiene. wash thoroughly after working w/asphalt &
ing 3:for protracted periods of time has produced dmg to
ing 4:pneumonitis, & abscess formation. asphalt fume
ing 5:when repeatedly applied to skin of experimental
=====================  Product Identification  =====================

MSDS NAME:LMCRS-2, ASPHALT EMULSION ANIONIC/CATIONIC(SUPDAT)
NIIN:00N048167
MSDS Number: CFNZQ
=== Responsible Party ===
Company:REED & GRAHAM INC
Address:690 SUNOL STREET
City:SAN JOSE
State:CA
ZIP:95126
Country:US
Info Phone Num:408-287-1400
Emergency Phone Num:408-287-1400
CAGE:5W738
=== Contractor Identification ===
Company:REED & GRAHAM, INC
Address:690 SUNOL ST
Box:City:SAN JOSE
State:CA
ZIP:95126
Country:US
Phone:408-287-1400
CAGE:5W738

=============  Composition/Information on Ingredients  =============

Name:ASPHALT (PETROLEUM)
CAS:8052-42-4
RTECS #:CI9900000
Fraction by Wt: 25-69%
OSHA PEL:N/K 
ACGIH TLV:5 MG/M3; (FUME)

Name:SUPDAT:AS MAY OCCUR W/ROAD WORK, CAN INCR SENSITIVITY TO
    SUNBURN. LAUNDER CONTAMD CLTHG. OBSERVE GOOD PERSONAL (ING 3)
RTECS #:9999999ZZ

Name:ING 2:HYGIENE. WASH THOROUGHLY AFTER WORKING W/ASPHALT &
    BEFORE EATING. BRTHG ASPHALT AEROSOL/ASPHALT SMOKE (ING 4)
RTECS #:9999999ZZ

Name:ING 3:FOR PROTRACTED PERIODS OF TIME HAS PRODUCED DMG TO
    LUNGS OF MICE. AMONG CHANGES OBSERVED WERE BRONCHITIS, (ING 5)
RTECS #:9999999ZZ

Name:ING 4:PNEUMONITIS, & ABSCESS FORMATION. ASPHALT FUME
    CONDENSATES HAVE BEEN SHOWN TO PRDCE TUMOROGENIC RESPONSE (ING 6)
RTECS #:9999999ZZ

Name:ING 5:WHEN REPEATEDLY APPLIED TO SKIN OF EXPERIMENTAL
    ANIMALS. REVELANCE OF DATA TO HUMANS IS NOT KNOWN AT THIS TIME.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: IRRITATION. SKIN: MILD
    IRRITATION. REPEATED CONTACT CAN CAUSE DERMATITIS. INHALATION:
    RESPIRATORY IRRITATION, NAUSEA, DIZZINESS, HEADACHE. INGESTION:
    STOMACH IRRITATION, NAUSEA, AND VOMIT ING.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: FLUSH W/LG AMTS OF WATER WHILE HOLDING EYELIDS OPEN FOR
    AT LST 15 MINS. GET MED ATTN IF CNDTN PERSISTS. SKIN: WASH W/SOAP &
    WATER OR USE WATERLESS HANDCLEANER. INHAL: REMOVE TO FRESH AIR. IF
    BRT HG IS DFCLT, GIVE OXYG; IF BRTHG HAS STOPPED, GIVE ARTF RESP.
    GET MED ATTN. INGEST: IF VICTIM IS CONSCIOUS, GIVE LIQUIDS. CALL
    PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:NONE
Extinguishing Media:DRY CHEMICAL, WATER FOG, FOAM CO*2.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:MAY FOAM IF HEATED TO 212F OR IF MIXED
    WITH MATERIALS IN EXCESS OF 212F.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN SPILL IMMEDIATELY IN SMALLEST AREA
    POSSIBLE. RECOVER AS MUCH OF PRODUCT AS POSSIBLE. RESIDUAL FLUID
    SHOULD BE SOAKED UP BY USE OF AN ABSORB MATERIAL. SWEEP UP &
    DISPOSE OF IN ACCORDANCE WITH F EDERAL, STATE, AND LOCAL
    REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE >180F/USE HEATING SURF
    >200F @ SEA LEVEL. SKIN CONT SHOULD BE MINIMIZED.
Other Precautions:REFER TO FOLLOWING PUBLICATION ENTITLED "SAFE STORAGE
    & HANDLING OF HOT ASPHALT", THE ASPHALT INSTITUTE, INFO SERIES NO.
    180, AUGUST 1981. WHEN ASPHALT PRODS ARE HEATED, THEY OFTEN GIVE
    OFF SM AMTS OF  HYDROGEN SULFIDE. HYDROGEN (SUPDAT)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED FOR NORMAL CONDITIONS OF USE. IF
    OPERATING CONDITIONS CAUSE HIGH VAPOR CONCENTRATIONS OR TLV IS
    EXCEEDED, USE SUPPLIED AIR RESPIRATOR APPROVED BY NIOSH.
Ventilation:NORMAL VENT UNLESS VAPORS ARE HIGH, THEN MECHANICAL
    VENTILATION SHOULD BE USED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
    COMPLETE PROTECTIVE CLOTHING IF MATL IS BEING HANDLED HOT.
Work Hygienic Practices:CLEAN EXPOSED SKIN W/SOAP & WATER/WATERLESS
    HAND CLEANER. LAUNDER/DISCARD CONTAMD CLTHG. DISCARD CONTAMD
    LEATHER MATL.
Supplemental Safety and Health
MFR TRADE NAME/PART NO:EMULSIONS. SPEC GRAV:SLIGHTLY >1 (WATER =1).
    OTHER PREC:SULFIDE IS EXTREMELY FLAMM, HIGHLY TOX GAS. BRTHG
    HYDROGEN SULFIDE MUST BE AVOIDED. MINIMIZE BRTHG OF VAPS,
    FUMES/MIST; W HEN POSS, USE VENT/WORK UPWIND OF SOURCE OF VAPS,
    FUMES/MIST. EXPOSING SKIN TO ASPHALT FUMES, MIST/VAPS, (ING 2)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Spec Gravity:SUPDAT
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:DILUTES WITH WATER
Appearance and Odor:BROWN TO BLACK LIQUID OR SEMISOLID.
Percent Volatiles by Volume:>1

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:HEAT, FLAME OR SPARK. DO NOT HEAT TO
    BOILING POINT - 212F.
Hazardous Decomposition Products:HAZARDOUS GASES/VAPS PRDCED ARE CO*2,
    CO, SULFUR DIOXIDE, ALDEHYDES, AND OTHER UNIDENTIFIED CMPDS MAY
    FORM UPON COMBUST.

====================  Disposal Considerations  ====================

Waste Disposal Methods:RECYCLE AS MUCH OF RECOVERABLE PROD AS POSS.
    DISPOSE OF NONRECYCLABLE MATL BY SUCH METHS AS CONTROLLED
    INCIN/BLENDING W/AGGREGATE & USED FOR PATCHING & OTHER MAINTENANCE
    USE. DISPOSAL MUST BE I/A/W FE DERAL, STATE & LOCAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
ENGLISH OAK, WATCO DANISH OIL FINISH L II (SUPDAT) 8052-41-3
8001-26-1
13463-67-7
64742-88-7
ICED OAK, WATCO DANISH OIL FINISH L II (SUPDAT) 64742-88-7
8052-41-3
8001-26-1
13463-67-7
LIGHT WALNUT, WATCO DANISH OIL FINISH L II(SUPDAT) 64742-88-7
8052-41-3
8001-26-1
13463-67-7
HIGH PERFORMANCE WOOD FILLER (PASTE) 14807-96-6
1317-65-3
100-42-5
109-16-0
METHYLENE CHLORIDE, 5378 75-09-2
METHYLENE CHLORIDE, 9330 75-09-2
METHYLENE CHLORIDE, 9348 75-09-2
METHYLENE CHLORIDE, 9624 75-09-2
METHYLENE CHLORIDE, Q480 75-09-2
METHYLENE CHLORIDE, 9315 75-09-2
METHYLENE CHLORIDE, 9313 75-09-2
METHYLENE CHLORIDE, 9341 75-09-2
METHYLENE CHLORIDE, 9128 75-09-2
METHYLENE CHLORIDE, 5531 75-09-2
METHYLENE CHLORIDE, 9329 75-09-2
PROPANE HD-5 GRADE, 26160 115-07-1
106-97-8
75-08-1
74-98-6
PROPANE HD-5 GRADE, 26161 74-98-6
115-07-1
106-97-8
75-08-1
PROPANE HD-5 GRADE, 26163 74-98-6
115-07-1
106-97-8
75-08-1
PROPANE HD-5 GRADE, 26164 74-98-6
115-07-1
106-97-8
75-08-1
PROPANE HD-5 GRADE, 26165 106-97-8
75-08-1
74-98-6
115-07-1
INSL-TROW THINNER CLEAR, BTH0003 78-93-3
108-65-6
108-88-3
1330-20-7
SELFLOC 2250 25085-02-3
CHEMPAD, CP400 67-63-0
STELLITE, 1 7440-02-0
7440-33-7
7440-48-4
7439-96-5
7440-21-3
7439-89-6
7440-47-3
7439-98-7
STELLITE, 12 7439-96-5
7440-21-3
7439-89-6
7440-47-3
7439-98-7
7440-02-0
7440-33-7
7440-48-4
STELLITE, 21 7439-89-6
7440-47-3
7439-98-7
7440-02-0
7440-33-7
7440-48-4
7439-96-5
7440-21-3
OVER KOTE LOOP FILLER, ASPHALT EMULSION (SUPDAT) 8052-42-4
OVER KOTE BUMPER ADHESIVE, ASPHALT (SUPDAT) 8052-42-4
OVER KOTE CRACK FILLER, ASPHALT EMULSION (SUPDAT) 8052-42-4
ASPHALT EMULSION, SS-1 8052-42-4
SS-1H, ASPHALT EMULSION ANIONIC/CATIONIC (SUPDAT) 8052-42-4
CSS-1H, ASPHALT EMULSION ANIONIC/CATIONIC (SUPDAT) 8052-42-4
CQS-1H, ASPHALT EMULSION ANIONIC/CATIONIC (SUPDAT) 8052-42-4
RS-1, ASPHALT EMULSION ANIONIC/CATIONIC (SUPDAT) 8052-42-4
RS-2, ASPHALT EMULSION ANIONIC/CATIONIC (SUPDAT) 8052-42-4
CRS-1, ASPHALT EMULSION ANIONIC/CATIONIC (SUPDAT) 8052-42-4
CRS-2 W/LATEX, ASPHALT EMULSION ANIONIC/ (SUPDAT) 8052-42-4
CRS-2H, ASPHALT EMULSION ANIONIC/CATIONIC (SUPDAT) 8052-42-4
CRS-2H W/LATEX, ASPHALT EMULSION ANIONIC/ (SUPDAT) 8052-42-4
LMCRS-2, ASPHALT EMULSION ANIONIC/CATIONIC(SUPDAT) 8052-42-4
LMCRS-2H, ASPHALT EMULSION ANIONIC/ (SUPDAT) 8052-42-4
OVER KOTE PAVEMENT COATING, ASPHALT (SUPDAT) 8052-42-4
CIRCLESAFE 850-A 124-38-9
12068-86-9
QUARTZ 14808-60-7
ALMO 525, 603183-00 64742-54-7
64742-65-0
63449-39-8
7440-66-6
7782-50-5
68649-42-3
378-03 DEEP TINT BASE, PACON SUPREME INT. (SUPDAT) 8052-41-3
64742-95-6
2807-30-9
WOOD FINISHES, A48N111 107-21-1
64742-47-8
64642-88-7
108-88-3
SAFROTIN 1% AEROSOL 71-55-6
124-38-9
31218-83-4
SCB CONCRESIVE 1422, PART B, 7115 B 90-72-2
595 WHITE ACRYLIC COVE BASE ADHESIVE

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com