=====================  Product Identification  =====================

MSDS NAME:595 WHITE ACRYLIC COVE BASE ADHESIVE
NIIN:00N051379
MSDS Number: CFPBF
=== Responsible Party ===
Company:W W HENRY CO
Address:5608 SOTO ST
City:HUNTINGTON PARK
State:CA
ZIP:90255
Country:US
Info Phone Num:213-583-5000
Emergency Phone Num:213-583-5000;800-424-9300(CHEMTREC)
CAGE:EO927
=== Contractor Identification ===
Company:HENRY W W CO
Box:3001
City:LANCASTER
State:PA
ZIP:17604
Country:US
Phone:717-396-2328;717-396-2935
CAGE:11761
Company:W W HENRY CO
Address:5608 SOTO ST
City:HUNTINGTON PARK
State:CA
ZIP:90255-5000
Country:US
Phone:213-583-4961
CAGE:EO927

=============  Composition/Information on Ingredients  =============

Name:NON-HAZARDOUS INGREDIENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:HYGIENE PRACT: BEFORE REUSE. CLEAN SKIN THOROUGHLY AFTER
    CONTACT WITH WATERLESS HAND CLEANER, FOLLOWED BY (ING 4)
RTECS #:9999999ZZ

Name:ING 3: WASHING THOROUGHLY WITH SOAP AND WATER.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: DIRECT CONTACT MAY CAUSE
    IRRITATION. SKIN: PROLONGED OR REPEATED CONTACT MAY CAUSE
    IRRITATION. INHALATION: MAY CAUSE RESPIRATORY TRACT IRRITATION.
    INGESTION: MAY CAUSE GASTROINTESTINAL IR RITATION. CHRONIC: NONE
    KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN DISORDERS.

=======================  First Aid Measures  =======================

First Aid:EYE: IMMED FLUSH W/PLENTY OF RUNNING WATER FOR AT LEAST 15
    MIN. REMOVE CONT LENSES & HOLD EYELIDS APART FROM EYEBALL TO ENSURE
    THORO RINSING. GET IMMED MED ATTN. SKIN: REMOVE CONTAM CLTHG &
    SHOES. THO RO WASH AFFECTED AREA W/SOAP & WATER. IF IRRIT PERSISTS,
    GET MED ATTN. LAUNDER CONTAM CLTHG BEFORE REUSE. INHAL: REMOVE TO
    FRESH AIR. IF BRTHG IS DFCLT, GET IMMED MED ATTN. INGEST: GET IMMED
    MED ATTN.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . USE WATER SPRAY TO COOL FIRE-EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:WET MATERIAL IS NOT COMBUSTIBLE. CLOSED
    CONTAINERS MAY RUPTURE DUE TO PRESSURE BUILD-UP.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR PROT EQUIP AS SITUATION WARRANTS. COVER
    SPILL W/ABSORBENT/OTHER INERT MATERIAL, SCOOP MATERIAL INTO DOT
    APPROVED CONTAINERS & REMOVE TO SAFE PLACE TO DRY. KEEP PRODUCT OUT
    OF SEWERS & OPEN BODIES  OF WATER. USE CAUTION: FLOOR MAY BE
    SLIPPERY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE & STORE IN COOL, DRY,
    WELL-VENTILATED AREA AWAY FROM INCOMPATIBLE MATLS. KEEP OUT OF
    REACH OF CHILDREN. USE ONLY AS DIRECTED ON LABEL.
Other Precautions:CLOSE CONTR AFTER EACH USE. DO NOT REUSE CONTR. WORK
    SITE ENVIRON: INITIALLY THERE MAY BE A POTENTIAL ADVERSE IMPACT ON
    INDOOR AIR QUALITY W/GEN WORK AREA DURING INSTALLATION PROCESS.
    THEREFORE YOU SH OULD ADVISE BLDG MANAGER OR (SUP DAT)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH APPROVED RESPIRATORY PROTECTION WHEN
    CONFORT LEVEL IS EXCEEDED.
Ventilation:USE W/ADEQ VENT. OPEN DOORS & WINDOWS & PROVIDE SUFFICIENT
    MECH(GEN &/LOC EXHST) VENT TO ASSURE FRESH AIR ENTRY & EXHST.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:AVOID BRTHG VAP. AVOID PRLNG/RPTD SKIN
    CONT/WEAR IMPERVIOUS CLTHG. REMOVE CONTAM CLTHG & SHOES; THORO
    CLEAN (ING 3)
Supplemental Safety and Health
VP: SAME AS WATER. OTHER PREC: OTHER APPROP PERS THAT: IT WILL BE NEC
    TO ESTABLISH & MAINTAIN ADEQ VENT OF WORK AREA, W/OUT CAUSING ENTRY
    OF CONTAMINANTS TO OTHER PARTS OF THE BLDG & PERS WHO ARE SENS
    ITIVE TO ODORS &/OR CHEMICALS SHOULD BEADVISED TO AVOID WORK AREA
    DURING THIS PROCESS.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SUP DAT
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DISPERSIBLE
Appearance and Odor:WHITE PASTE, MILD ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:IF BURNED, PRODUCES DENSE BLACK SMOKE
    AND NOXIOUS GASES (CARBON MONOXIDE, HYDROCARBONS, ETC).

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
    LOCAL REGULATIONS. DO NOT FLUSH ADHESIVE DOWN DRAINS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***