=====================  Product Identification  =====================

MSDS NAME:01-D0301-000, PROFESSIONAL LYSOL BRAND (SUPDAT)
NIIN:00N082140
MSDS Number: CGCHS
=== Responsible Party ===
Company:NATIONAL LABORATORIES
Address:225 SUMMIT AVENUE
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Info Phone Num:201-573-5700
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:63180
=== Contractor Identification ===
Company:RECKITT AND COLMAN INC
Address:1655 VALLEY ROAD
Box:City:WAYNE
State:NJ
ZIP:07474
Country:US
Phone:800-338-6167
CAGE:63180

=============  Composition/Information on Ingredients  =============

Name:ETHANOL, 2-(2-BUTOXYETHOXY)-; (DIETHYLENE GLYCOL MONOBUTYL
    ETHER)
CAS:112-34-5
RTECS #:KJ9100000
Fraction by Wt: 5.6%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:PROPANE, 2-METHYL; (ISOBUTANE)
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: 7.0%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NONE EXPECTED. SKIN:
    PROLONGED OR REPEATED CONTACT MAY CAUSE IRRITATION. EYES: MAY CAUSE
    IRRITATION. INGESTION: IS VERY UNLIKELY THROUGH THE NORMAL
    ANTICIPATED USE OF THIS PRODUCT. INGESTI ON OF SMALL QUANTITIES IS
    NOT EXPECTED TO CAUSE ANY SIGNIFICANT ADVERSE EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:INHAL:NONE NORMALLY REQD. IF NEC, REMOVE TO FRESH AIR.
    SKIN:IN KEEPING W/GOOD HYGIENIC PRACTICES, RINSE THOROUGHY W/H*2O.
    EYES:IMMED FLUSH THOROUGHLY W/H*2O, REMOVE ANY CNTCT LENSES &
    CONTINUE TO FLUS H EYES W/PLENTY OF H*2O FOR AT LEAST 15MIN.
    CONSULT A MD IF IRRIT PERSISTS. INGEST:IN KEEPING WITH GOOD SAFETY
    PRACTICES, CONTACT A MD. DO NOT INDUCE VOMIT. DO NOT GIVE LIQUIDS
    TO AN UNCON PERSON.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
    DIOXIDE, AS SUITABLE FOR SURROUNDING FIRE.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP . MOVE
    CNTNRS AWAY FROM FIRE IF POSS & SAFE TO DO SO. USE WATER SPRAY TO
    COOL FIRE EXPOSED CNTNRS. (SUPDAT)
Unusual Fire/Explosion Hazard:CONTENTS UNDER PRESS. DO NOT USE/STORE
    NEAR HEAT/OPEN FLAME. EXPOS TO TEMP ABOVE 120F/IN SUN/DISCARDING
    CAN IN FIRE OR INCINERATOR MAY CAUSE BURSTING.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SPILLS MAY BE FLUSHED TO SEWER WITH LARGE
    QUANTITIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN ORGINAL CONTAINER IN AREAS
    INACCESSIBLE TO SMALL CHILDREN. DO NOT REUSE EMPTY CONTAINER.
    REPLACE CAP AND DISCARD IN TRASH.
Other Precautions:DO NOT INCINERATE OR PUNCTURE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED. NIOSH APPROVED RESPIRATOR
    APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART #:DISINFECTANT FOAM CLEANER. VP:34-40 PSIG @ 70F.
    VAP DENS:>1 (CONCENTRATE). FIRE FIGHT PROC:PROVIDE SHIELDING FOR
    VENTING, RUPTURING OR BURSTING CONTAINERS.

==================  Physical/Chemical Properties  ==================

Vapor Pres:SUPDAT
Vapor Density:SUPDAT
Spec Gravity:1.012
pH:12.1
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:COMPLETE
Appearance and Odor:AEROSOL CONTAINERS

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS AND ACIDS.
Stability Condition to Avoid:TEMPERATURES ABOVE 120 F.
Hazardous Decomposition Products:OXIDES OF NITROGEN AND/OR CARBON AND
    OTHER UNIDENTIFIED ORGANIC COMPOUNDS MAY BE FORMED DURING THERMAL
    DECOMPOSITION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS. CONTAINER DISPOSAL: DO NOT REUSE EMPTY
    CONTAINER. REPLACE CAP AND DISCARD IN TRASH.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***