=====================  Product Identification  =====================

MSDS NAME:SULFUR, SX1226
NIIN:00N082539
MSDS Number: CGDDC
=== Responsible Party ===
Company:EM SCIENCE
Address:480 DEMOCRAT RD
Box:70
City:GIBBSTOWN
State:NJ
ZIP:08027
Country:US
Info Phone Num:609-423-6300
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:DO242
=== Contractor Identification ===
Company:E M SCIENCE DIV OF E M INDUSTRIES INC
Address:480 DEMOCRAT ROAD
Box:70
City:GIBBSTOWN
State:NJ
ZIP:08027
Country:US
Phone:800-222-0342/609-423-6300
CAGE:63612
Company:EM SCIENCE
Address:480 DEMOCRAT RD
City:GIBBSTOWN
State:NJ
ZIP:08927
Phone:800-424-9300 (CHEMTREC)
CAGE:DO242

=============  Composition/Information on Ingredients  =============

Name:SULFUR
CAS:7704-34-9
RTECS #:WS4250000
Fraction by Wt: 100%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50: (ORAL, RAT) 175 MG/KG
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MAY BE IRRITATING ON CONTACT WITH
    SKIN, EYES OR MUCOUS MEMBRANES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:DATA NOT AVAILABLE.

=======================  First Aid Measures  =======================

First Aid:GET MEDICAL ASSISTANCE FOR ALL CASES OF OVEREXPOSURE. SKIN:
    IMMEDIATELY FLUSH THOROUGHLY WITH LARGE AMOUNTS OF WATER. EYES:
    IMMEDIATELY FLUSH THOROUGHLY WITH WATER FOR AT LEAST 15 MINUTES.
    INHALATION:  REMOVE TO FRESH AIR; GIVE ARTIFICIAL RESPIRATION IF
    BREATHING HAS STOPPED. INGESTION: GET IMMEDIATE MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:405F,207C
Extinguishing Media:USE WATER, DRY CHEMICAL, CARBON DIOXIDE OR
    "ALCOHOL" FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:SULFUR DUST SUSPENDED IN AIR IGNITES
    EASILY & PRODUCES EXPLOSIVE FORCES IN CONFINED AREAS. IGNITION
    SOURCES CAN BE HEAT, FRICTION, PROPHORIC SULFUR & (SUPDAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE AREA OF ALL UNNECESSARY PERSONNEL.
    WEAR SUITABLE PROT EQUIP AS LISTED. ELIMINATE ANY IGNITION SOURCES
    UNTIL AREA IS DETERMINED FREE FROM EXPLOSION OR FIRE HAZS. CONTAIN
    RELEASE & ELIMINATE IT S SOURCE IF THIS CAN BE DONE W/OUT RISK.
    (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY, AREA AWAY FROM
    OXIDIZING AGENTS. STORE AWAY FROM IGNITION SOURCES & INCOMPATIBLE
    MATERIALS.
Other Precautions:DO NOT BREATHE DUST. DO NOT GET IN EYES, ON SKIN OR
    ON CLOTHING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:MATERIAL SHOULD BE HANDLED OR TRANSFERRED IN AN APPROVED
    FUME HOOD OR WITH ADEQUATE VENTILATION.
Protective Gloves:NEOPRENE OR EQUIVALENT.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. DO NOT TAKE
    INTERNALLY.
Supplemental Safety and Health
EXPLO HAZ: INTERNALLY GENERATED STATIC ELECTRICITY. THERMAL DECOMP
    PRODUCES HIGHLY TOXIC FUMES. SPILL PROC: TAKE UP & CONTAINERIZE FOR
    PROPER DISPOSAL AS DESCRIBED UNDER DISPOSAL. COMPLY W/FEDERAL, ST
    ATE & LOCAL REGS ON REPORTING RELEASES.REFER TO REGULATORY INFO FOR
    REPORTABLE QUANTITY & OTHER REGULATORY DATA.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:832F,445C
Melt/Freeze Pt:M.P/F.P Text:246F,119C
Vapor Pres:<0.00 @20C
Spec Gravity:2.07 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:YELLOW RHOMBIC SOLID; ODORLESS.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NITRATES, CHLORATES, CHROMIC ANHYDRIDE, KMNO*4, PBO*2.
Stability Condition to Avoid:IGNITION SOURCES.
Hazardous Decomposition Products:SO*2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:MATL DOES NOT HAVE EPA WASTE NUMBER & IS NOT
    LISTED WASTE, HOWEVER, CONSULTATION W/PERMITTED WASTE DISPOSAL SITE
    (TSD) SHOULD BE ACCOMPLISHED. ALWAYS CONTACT PERMITTED WASTE
    DISPOSER (TSD) TO ASSURE C OMPLIANCE W/ALL CURRENT LOCAL, STATE &
    FED REGS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***