=====================  Product Identification  =====================

MSDS NAME:105-01 WHITE BASE, BRUTONE INTERIOR ALKYD (SUPDAT)
NIIN:00N082500
MSDS Number: CGDBJ
=== Responsible Party ===
Company:BRUNING PAINT CO
Address:601 S HAVEN ST
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Info Phone Num:410-342-3636; 410-342-3641
Emergency Phone Num:410-342-3636; 410-342-3641
CAGE:EO376
=== Contractor Identification ===
Company:BRUNING PAINT COMPANY
Address:601 S. HAVEN STREET
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-424-9300(NIGHT)410-342-3636 DAY
CAGE:EO376
Company:KYANIZE PAINT
Address:601 S HAVEN ST
Box:City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-368-2076
CAGE:85520

=============  Composition/Information on Ingredients  =============

Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 35-50%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM
    SILICATE)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 1-5%
OSHA PEL:20 MPPCF
ACGIH TLV:2 MG/M3 RDUST

Name:SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (HYDROCARBON
    SOLVENT)
CAS:64742-88-7
Fraction by Wt: 1-5%
Other REC Limits:1050 MG/M3 STEL(MFR)
OSHA PEL:2625 MG/M3 (MFR)
ACGIH TLV:525 MG/M3 (MFR)

Name:VOLATILE ORGANIC COMPOUNDS: 3.21-3.73.
RTECS #:9999999VO

Name:EXPLO HAZ:NOT APPLY TO HOT SURFS. NEVER USE WELDING/CUTTING
    TORCH ON/NEAR CNTNR (EVEN EMPTY) BECAUSE PROD (EVEN (ING 6)
RTECS #:9999999ZZ

Name:ING 5:RESIDUE) MAY IGNITE EXPLOSIVELY. CNTNRS EXPOS TO
    INTENSE HEAT FROM FIRES SHOULD BE COOLED W/WATER TO PVNT (ING 7)
RTECS #:9999999ZZ

Name:ING 6:VAPOR PRESSURE BUILDUP WHICH COULD RESULT IN
    CONTAINER RUPTURE.
RTECS #:9999999ZZ

Name:SPILL PROC:LOCAL HEALTH & POLLUTION CONTROL AGENCIES. CALL
    SPILL RESPONSE TEAMS IF SPILL IS LARGE.
RTECS #:9999999ZZ

Name:OTHER PREC:USE. THESE PRODS CONTAIN PIGMENTS WHICH MAY
    BECOME A DUST NUISANCE WHEN REMOVED BY ABRASIVE BLASTING,(ING 10)
RTECS #:9999999ZZ

Name:ING 9:SANDING OR GRINDING.
RTECS #:9999999ZZ

Name:RESP PROT:PARTICULATE & GAS & VAP. IN CONFINED AREAS, USE
    NIOSH APPRVD AIR LINE TYPE RESPS/HOODS. NIOSH APPRVD (ING 12)
RTECS #:9999999ZZ

Name:ING 11:RESPIRATORY PROTECTION MAY ALSO BE NECESSARY IN ANY
    LATER MANUFACTURING OPERATIONS IN WHICH THESE (ING 13)
RTECS #:9999999ZZ

Name:ING 12:PRODUCTS MAY BECOME AIRBORNE IN THE FORM OF VAPOR OR
    DUST.
RTECS #:9999999ZZ

Name:VENT:RESP TO PVNT OVEREXP. PROVIDE GEN DILUTION/LOC EXHST
    VENT IN VOL & PATTERN TO KEEP TLV OF THE MOST HAZ ING (ING 15)
RTECS #:9999999ZZ

Name:ING 14:BELOW ACCEPTABLE LIMIT, LEL BELOW STATED LIMIT & TO
    REMOVE DECOMPOSITION PRODUCTS DURING WELDING OR FLAME(ING 16)
RTECS #:9999999ZZ

Name:ING 15:CUTTING ON SURFACES COATED W/THESE PRODUCTS.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:REPORTS HAVE ASSOCIATED REPEATED AND
    PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT
    BRAIN AND NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY
    CONCENTRATING AND INHALING CONTE NTS MAY BE HARMFUL OR FATAL. DO
    NOT BREATHE VAPORS OR SPRAY MIST. WEAR AN APPROPRIATE, PROPERLY
    FITTED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:NIOSH APPROVED RESPIRATOR DURING &
    AFTER APPLICATION UNLESS AIR MONITORING DEMONSTRATES VAPOR/MIST
    LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW RESP MFR'S DIRECTIONS
    FOR RESP USE. PRODS MAY CAU SE NOSE, THROAT & EYE IRRIT. SYMPS OF
    OVEREXP INCLUDE DIZZ, HDCH, INTOXICATION W/EUPHORIA LEADING TO
    UNCONSCIOUSNESS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes:FLUSH W/LUKE WARM WATER FOR AT LST 15 MINS. SEEK MD
    IMMED. SKIN:FLUSH WASH W/COPIOUS AMTS OF LUKE WARM WATER. REMOVE
    CONTAM CLTHG PROMPTLY. IF IRRIT OCCURS, GET MED ATTN. INHAL:REMOVE
    EXPOS INDIV IDUAL TO FRESH AIR. RESTORE BRTHG IF REQD. CONT MD
    IMMED. INGEST:RINSE MOUTH IMMED. GIVE EXPOS INDIVIDUAL 6-8 OZS OF
    LIQ. (NEVER GIVE ANYTHING BY MOUTH TO UNCON PERS). DO NOT INDUCE
    VOMIT (SUPP DATA)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:104F,40C
Lower Limits:0.9%
Upper Limits:7%
Extinguishing Media:THE NFPA CLASS B EXTINGUISHER IS DESIGNED TO
    EXTINGUISH NFPA CLASS IB FLAMMABLE LIQUID FIRES.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
    WATER SPRAY MAY BE INEFT. WATER MAY BE USED TO COOL CLSD CNTNRS TO
    PVNT PRESS BUILDUP & POSS AUTOIGNIT/ (SUPDAT)
Unusual Fire/Explosion Hazard:FLAMM LIQ-CLASS II. KEEP CNTNRS TIGHTLY
    CLSD. ISOLATE FROM HEAT, ELEC EQUIP, SPKS & OPEN FLAME. CLSD CNTNRS
    MAY EXPLODE WHEN EXPOS TO EXTREME HEAT. DO (ING 5)

==================  Accidental Release Measures  ==================

Spill Release Procedures:STOP &/OR CONTAIN DISCHARGE IF IT MAY BE DONE
    SAFELY. KEEP ALL SOURCES OF IGNIT AWAY. VENT AREA OF SPILL. USE
    NON-SPARKING TOOLS FOR CLEANUP. COVER W/INERT MATL TO REDUCE FUMES.
    KEEP OUT OF DRAINS, SE WERS/WATERWAYS. CONT FIRE AUTHS. NOTIFY(ING
    8)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONTACT W/EYES. DO NOT STORE
    >120F. GROUND CNTNRS WHEN POURING & LIMIT FREE-FALL TO A FEW INCHES
    TO PVNT STATIC SPKS. USE ONLY W/ADEQUATE VENT.
Other Precautions:AVOID SPONT COMBUST OF CONTAM RAGS/OTHER EASILY
    IGNITABLE ORGANIC MATLS BY IMMED IMMERSION IN WATER. EMPTIED CNTNRS
    MAY CONTAIN HAZ PROPERTIES. DO NOT CUT/PUNCTURE CNTNR. DO NOT WELD
    NEAR CNTNR. KEEP  CNTNR TIGHTLY CLSD WHEN NOT IN (ING 9)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN OUTDOOR/OPEN AREAS, USE NIOSH APPRVD MECH
    FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING
    SPRAY APPLICATION. IN RESTRICTED VENT AREAS, USE NIOSH APPRVD
    CHEM-MECH FILTERS DESIGNED	TO REMOVE COMBINATION OF (ING 11)
Ventilation:USE VENT AS REQD TO CONTROL VAP CONCS. AVOID PRLNG/RPTD
    BRTHG OF VAPS. IF EXPOS EXCEEDS TLV, USE NIOSH APPRVD (ING 14)
Protective Gloves:RESISTANT GLOVES SUCH AS NATURAL(SUPDAT)
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA . AN APRON SHOULD BE WORN TO AVOID SKIN
    CONTACT.
Work Hygienic Practices:WASH HANDS THORO BEFORE EATING & USING
    WASHROOM. REMOVE CONTAM CLTHG IMMED & DO NOT WEAR IT UNTIL IT HAS
    BEEN (SUPDAT)
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:SATIN ENAMEL. % VOLAT:49.44-57.73. FIRE FIGHT
    PROC:EXPLO WHEN EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG NOZZ
    ARE PREF. HAZ DECOMP PROD:OXIDES OF NITROGEN. FIRST AID PROC:UN
    LESS ADVISED BY MD. CONT MD IMMED. PROTGLOVES;RUBBER, NEOPRENE,
    BUNA N/NITRILE. HYGIENE PRACT:PROPERLY LAUNDERED.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:2 @ 68F
Vapor Density:HVR/AIR
Spec Gravity:1.04-1.32
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:AVOID EXPOSURE TO SPARKS, OPEN FLAME, HOT
    SURFACES & ALL SOURCES OF HEAT & IGNITION.
Hazardous Decomposition Products:MAY PRODUCE HAZ FUMES WHEN HEATED TO
    DECOMP AS IN WELDING. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON
    DIOXIDE & (SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT FLUSH TO SEWER, WATERSHED OR WATERWAY.
    DISPOSE OF THESE PRODUCTS I/A/W APPLICABLE LOCAL, COUNTY, STATE &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***