=====================  Product Identification  =====================

MSDS NAME:#1-200 PARAFFIN WAX
NIIN:00-285-2045
MSDS Number: BDTMC
=== Responsible Party ===
Company:STEVENSON BROTHERS/PHILADELPHIA, PA 19140
Emergency Phone Num:(215) 223-2600
CAGE:LO158
=== Contractor Identification ===
Company:STEVENSON BROTHERS/PHILADELPHIA, PA 19140
CAGE:LO158
Company:STEVENSON-COOPER INC
Address:1039 W VENANGO ST
Box:City:PHILADELPHIA
State:PA
ZIP:19140-4313
Country:US
Phone:215-223-2600 FAX: 215-223-3597
CAGE:78583

=============  Composition/Information on Ingredients  =============

Name:PARAFFIN WAX
CAS:8002-74-2
RTECS #:RV0350000
OSHA PEL:2 MG/M3 (FUME)
ACGIH TLV:2 MG/M3 (FUME); 9192

=====================  Hazards Identification  =====================

Effects of Overexposure:MINIMAL IRRITATION TO SKIN AND EYES.

=======================  First Aid Measures  =======================

First Aid:REMOVE MOLTEN MATERIAL AND TREAT FOR BURNS IF SKIN IS
    CONTACTED.

=====================  Fire Fighting Measures  =====================

Flash Point:>400F COC
Extinguishing Media:CO2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:DON'T USE WATER EXCEPT AS A FOG.
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARDS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:MAY BE PUMPED WHITE HOT. SCRAPE UP SOLID AFTER
    COOLING.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID SKIN CONTACT WITH MOLTEN
    MATERIAL.
Other Precautions:USE NORMAL GOOD HYGIENE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT ORDINARILY REQUIRED
Ventilation:LOCAL EXHAUST: NOT ORDINARILY REQUIRED
Eye Protection:GOGGLES
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:>650F
Vapor Pres:>0.
Spec Gravity:0.756
Solubility in Water:NIL
Appearance and Odor:WHITE SOLID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAME OR SPARKS
Hazardous Decomposition Products:CO, CO2, WHEN COMBUSTED

====================  Disposal Considerations  ====================

Waste Disposal Methods:REMOVE TO REPROCESSING UNIT. BURN UNDER
    CONTROLLED CONDITIONS USE APPROVED LANDFILL AREA.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***