=====================  Product Identification  =====================

MSDS NAME:TEST KIT IRIDITE 14-2 BRUSH KIT, (IRIDITE 14-2)
NIIN:01-360-9650
MSDS Number: CGLGW
=== Responsible Party ===
Company:MACDERMID INC.(FRMLY ALLIED-KELITE)
Address:245 FREIGHT STREET
City:WATERBURY
State:CT
ZIP:06702
Country:US
Info Phone Num:203-575-5700
Emergency Phone Num:203-575-5606/800-424-9300(CHEMTREC)
CAGE:0PX54
=== Contractor Identification ===
Company:MACDERMID INC
Address:50 BROOKSIDE RD
Box:671
City:WATERBURY
State:CT
ZIP:06720
Country:US
Phone:203-575-5700
CAGE:76071
Company:MACDERMID INC.(FRMLY ALLIED-KELITE)
Address:245 FREIGHT STREET
Box:City:WATERBURY
State:CT
ZIP:06702
Country:US
Phone:203-575-5606/800-424-9300(CHEMTREC)
CAGE:0PX54

=============  Composition/Information on Ingredients  =============

Name:CHROMIC ACID (SARA 313) (CERCLA)
CAS:1333-82-0
RTECS #:GB6650000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.1 MG (CRO3)/M3
ACGIH TLV:0.05 MG(CR)/M3;A1;96

Name:BARIUM NITRATE
CAS:10022-31-8
RTECS #:CQ9625000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:5 MG BA/M3
ACGIH TLV:2 MG BA/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:ACUTE:CAUSES SKIN/EYE BURNS UPON
    DIRECT CONTACT.INHAL OF DUST/MIST/VAP CAUSES DMG TO MUCOUS
    MEMBRANES & RESP SYSTEM.SWALLOWING CAUSES DMG TO DIGESTIVE
    TRACT.CHRONIC:IRRIT OF SKIN,EYE,MUC MEMBRANES,LUN GS & CENTRAL
    NERVOUS SYSTEM.CAN CAUSE DELAYED REACTION & EXTERNAL ULCERS ON
    SKIN.
Explanation of Carcinogenicity:PER MSDS:CHROMIC ACID-SUSPECTED
    CARC-NTP,IARC.
Effects of Overexposure:SKIN/EYE BURNS, DAMAGE TO MUCOUS MEMBRANES &
    RESPIRATORY SYSTEM.DAMAGE TO DIGESTIVE TRACT.IRRIT SKIN,EYE,MUCOUS
    MEMBRANE,LUNGS & CENTRAL NERVOUS SYSTEM.CAN CAUSE DELAYED REACTION
    & EXTERNAL ULCERS ON  SKIN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/WATER 15MINS.CONTACT PHYSICIAN IMMED.SKIN:REMOVE
    CONTAM CLOTH,FLUSH SKIN W/WATER FOR @LEAST 20MINS.CALL PHYSICIAN
    IMMED IF IRRIT OR BURNS OCCUR.INHAL:REMOVE VICTIM TO FRESH
    AIR.CONTACT PHY SICIAN.INGEST:DONT INDUCE VOMIT.IF CONSC HAVE
    VICTIM RINSE MOUTH,THEN DRINK LARGE QUANT OF WATER.CALL PHYSICIAN
    IMMED.NEVER GIVE ANYTHING BY MOUTH TO UNCONSC PERSON.

=====================  Fire Fighting Measures  =====================

Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NP
Upper Limits:NP
Extinguishing Media:ANY CHEMICAL OR WATER SPRAY OR CO2 OR FOAM.CLOSED
    CONTAINERS WHEN EXPOSED TO FIRE MAY BE COOLED WITH WATER.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:SPONTANEOUS COMBUSTION MAY OCCUR UPON
    CONTACT W/ALCOHOLS, KETONES, AND OTHER ORGANIC COMPOUNDS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR PROTECTIVE CLOTHING & EQPMT DURING
    CLEAN-UP.SWEEP UP POWDER SPILLS & PLACE IN STEEL CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM REDUCING AGENTS,
    COMBUSTIBLES, ORGANICS & SULPHUR.STORE AWAY FROM DIRECT HEAT OR
    SUNLIGHT.
Other Precautions:DONT SWALLOW.AVOID EYE & SKIN CONTACT.KEEP CONTAINER
    TIGHTLY CLOSED WHEN NOT IN USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF TLV/PEL OF PRODUCT OR ANY COMPONENT IS
    EXCEEDED USE NIOSH APPROVED RESPIRATOR.
Ventilation:LOCAL, IF NECESSARY MAINTAIN ALLOWABLE TWA OR TLV.
Protective Gloves:RUBBER
Eye Protection:CHEMICAL SAFETY GOGGLES,FULL FACE SHIELD
Other Protective Equipment:RUBBER APRON, RUBBER BOOTS.
Work Hygienic Practices:WASH THOROUGHLY AFTER HNDLG.
Supplemental Safety and Health
KEY1:HCC=D4. 3-PART KIT CONSISTING OF 2 CANS OF IRIDITE 14-2,2 CANS OF
    ISOPREP 188 AND 1 ULTRA-FINE SCOTCH BRITE PAD.

==================  Physical/Chemical Properties  ==================

HCC:D4
Boiling Pt:B.P. Text:NP
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:NP
Vapor Density:NP
Spec Gravity:NP
pH:<5
Viscosity:NP
Evaporation Rate & Reference:NP
Solubility in Water:NP
Appearance and Odor:NP
Percent Volatiles by Volume:NP
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
REDUCING AGENTS, COMBUSTIBLES, ORAGNICS, SULPHUR.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE

====================  Disposal Considerations  ====================

Waste Disposal Methods:IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE
    AND FEDERAL REGULATIONS.SEC 313 REPORTING:CHROMIUM CMPD, BARIUM
    CMPD.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***