===================== Product Identification =====================
MSDS NAME:NO. 109 GRAY ENAMEL,MIL-P-15183,#11
NIIN:00-285-8297
MSDS Number: BDTSQ
=== Responsible Party ===
Company:JORDAN PAINT MANUFACTURING CO.
Address:7250 FRANKLIN ST
City:FOREST PARK
State:IL
ZIP:60130-1162
Country:US
CAGE:LO166
=== Contractor Identification ===
Company:JORDAN PAINT MANUFACTURING CO.
Address:7250 FRANKLIN ST
Box:City:FOREST PARK
State:IL
ZIP:60130-1162
Country:US
CAGE:LO166
Company:JORDAN PAINT MFG CO INC
Address:7250 FRANKLIN ST
Box:City:FOREST PARK
State:IL
ZIP:60130-1162
Country:US
Phone:708-366-8171
CAGE:28194
============= Composition/Information on Ingredients =============
Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: 0.52%
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9192
Name:ZINC OXIDE
CAS:1314-13-2
RTECS #:ZH4810000
Fraction by Wt: 17.9%
OSHA PEL:15MG/M3 TDUST/5 FUME
ACGIH TLV:10MG/M3 TDUST; 9293
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 4%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:MAGNESIUM SILICATE
Fraction by Wt: 13.4%
ACGIH TLV:10MG/CUM (MFR)
Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: 34.5%
OSHA PEL:100 PPM
===================== Hazards Identification =====================
Effects of Overexposure:EYE/SKIN CONT: PRIMARY IRRITATION. INHALATION:
ANESTHETIC,IRRIT OF RESP TRACT,HEADACHE,CONFUSE,COMA
======================= First Aid Measures =======================
First Aid:SPLASH-EYES OR SKIN: FLUSH W.WATER 15 MIN,TAKE TO PHYSICIAN.
VAPORS: REMOVE FROM EXPOSURE,RESTORE BREATHING,IF NEEDED. NOTIFY A
PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point:100F/37C
Lower Limits:0.9
Upper Limits:2
Extinguishing Media:CO2,DRY CHEMICAL
Fire Fighting Procedures:USE WATER TO COOL CLOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONT MAY EPLODE WHEN EXPOSED TO
HEAT.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS,VENTILATE AREA. CONTAIN AND REMOVE WITH INERT
ABSORBENT MATERIAL. USE NON SPARKING TOOLS.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE OR USE NEAR HEAT SPARKS
OR FLAME.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED SKIN CONTACT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:MECHANICAL LOCAL
Protective Gloves:SOLVENT RESIST
Eye Protection:FACE SHIELD
Other Protective Equipment:AS NEEDED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
ADD INGRED: ALKYD SOLIDS 30.92; DRIERS 0.5%; LEAD 0.09%.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:148C/299F
Vapor Density:>1
Evaporation Rate & Reference:<1 ETHER
Percent Volatiles by Volume:55
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOCAL,STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|