=====================  Product Identification  =====================

MSDS NAME:THERMOGRIP 6368, 193569
NIIN:00N083506
MSDS Number: CGQWD
=== Responsible Party ===
Company:BOSTIK INC
Address:BOSTON STREET
City:MIDDLETON
State:MA
ZIP:01949
Country:US
Info Phone Num:508-777-0100
Emergency Phone Num:800-227-0332
Preparer's Name:A.L. SARGENT
CAGE:EO689
=== Contractor Identification ===
Company:BOSTIK INC
Address:BOSTON ST
City:MIDDLETON
State:MA
ZIP:01949
Country:US
Phone:508-777-0100 OR FAX 508-750-7212
CAGE:EO689
Company:BOSTIK INC.
Address:211 BOSTON ST
Box:City:MIDDLETON
State:MA
ZIP:01949
Country:US
Phone:978-777-0100/800-227-0332
CAGE:5W425

=============  Composition/Information on Ingredients  =============

Name:NON-HAZARDOUS INGREDIENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NO HAZARD KNOWN AT THIS TIME.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE KNOWN TO BOSTIK.
Medical Cond Aggravated by Exposure:NONE KNOWN TO BOSTIK.

=======================  First Aid Measures  =======================

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
    SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
    W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM
    MD	. SKIN:IMMEDIATELY IMMERSE CONTACTED AREA IN COLD WATER TO
    REDUCE TEMPERATURE & RELIEVE PAIN. DO NOT ATTEMPT TO PEEL ADHESIVE
    FROM SKIN. CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:500F,260C
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE, FLOOD W/WATER.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:IF LIQUID, SOAK UP W/ABSORBENT MATERIAL SUCH
    AS SAND, EARTH, SWEEPING COMPOUND OR SOME OTHER ABSORBENT MATERIAL.
    PACKAGE ABSORBENT MATERIAL OR SOLID PRODUCT IN STEEL DRUMS WHICH
    ARE IN GOOD CONDITION.  THOROUGHLY CLEAN AREA WHERE SPILL OCCURRED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL LOCATION (60-80F) AWAY
    FROM SUNLIGHT & ANY SOURCE OF HEAT. KEEP CONTAINER TIGHTLY CLOSED
    WHEN NOT BEING USED.
Other Precautions:USE W/ADEQUATE VENTILATION, AVOID PROLONGED OR
    REPEATED BREATHING OF VAPORS. AVOID SKIN CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:MECHANICAL EXHAUST IS ACCEPTABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:DIOXIDE, CARBON MONOXIDE, WATER VAPOR, OXIDES OF
    NITROGEN OR WIDE VARIETY OF INNOCUOUS OR TOXIC FUMES. WASTE DISP
    METH:AS HAZARDOUS WASTE UNDER FEDERAL REGULATIONS IN EFFECT AT THE
    TIM E OF PRINTING OF THIS MSDS.

==================  Physical/Chemical Properties  ==================

Spec Gravity:0.94
Solubility in Water:0.0%
Appearance and Odor:LIGHT STRAW TO LIGHT AMBER COLORED ADHESIVE STICKS.
Percent Volatiles by Volume:0.0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:UNKNOWN DUE TO COMPLEX NATURE OF THIS
    MATL. FUMES FROM COMPLETE/INCOMPLETE COMBUST OF THIS MATL MAY INCL
    CARBON (SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISP OF I/A/W FED, STATE & LOC REGS. BE AWARE
    THAT STATE & LOC REQUIREMENTS MAY DIFFER WIDELY DEPENDING ON
    LOCATION & IN MANY CASES BE DIFF FROM FED RULES. WHEN INTENDING TO
    DISP OF THIS MATL, USER IS	ADVISED THAT THIS WOULD NOT BE
    CLASSIFIED(SUPDAT)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***