=====================  Product Identification  =====================

MSDS NAME:KAPTON POLYIMIDE FILM, H TYPE
NIIN:00K001514
MSDS Number: CHKWL
=== Responsible Party ===
Company:DU PONT E I DE NEMOURS & CO INC
Address:1007 MARKET STREET
Box:1635
City:WILMINGTON
State:DE
ZIP:19898
Country:US
Info Phone Num:800-441-7515/MSDS 302-992-3511
Emergency Phone Num:800-441-3637/800-424-9300(CHEMTREC)
CAGE:18873
=== Contractor Identification ===
Company:DUPONT POLYMER PRODUCTS
Address:US RT 23 S
Box:89
City:CIRCLEVILLE
State:OH
ZIP:43113
Country:US
Phone:800-237-4357
CAGE:9A090
Company:E.I. DUPONT DE NEMOURS & CO
Address:1007 MARKET STREET
Box:City:WILMINGTON
State:DE
ZIP:19898
Country:US
Phone:800-441-7515;800-441-9442
CAGE:18873

=============  Composition/Information on Ingredients  =============

Name:INERT POLYIMIDE FILM
Fraction by Wt: 100%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:BEFORE USING KAPTON POLYIMIDE FILMS
    READ BULLETIN ON SAFE HNDLG/USE.INHAL:NOT PROBABLE ROUTE OF EXPO
    FOR FILM.FOR POLYMER FRM WHICH FILM MADE DUPONT RECOMMENDS TREATING
    POLYMER DUST AS NUISANCE PARTIC ULATES.SKIN:NO IRRIT EXPECTED FROM
    HNDLG FILM.EYE/INGEST:NOT PROBABLE ROUTE OF EXPOSURE FOR FILM.
Explanation of Carcinogenicity:PER MSDS:NONE FOR THIS H TYPE.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL:NOT PROBABLE ROUTE OF EXPO FOR FILMS.SKIN:WASH
    W/SOAP/WATER AFTER HANDLING.IF SKIN IRRIT DEVELOPS CONSULT
    PHYSICIAN.EYE:FLUSH W/WAER.CONSULT PHYSICIAN IF IRRIT
    PERSISTS.INGEST:NOT PROBABLE ROUTE	OF EXPO FOR FILMS.

=====================  Fire Fighting Measures  =====================

Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NP'
Upper Limits:NP
Extinguishing Media:WATER, FOAM, DRY CHEMICAL, CO2.
Fire Fighting Procedures:NONE REQUIRED.
Unusual Fire/Explosion Hazard:NOT FIR/EXPLO HAZ.FLAMM CHARACTERISTIC OF
    POLYIMIDE FILM IS REPORTED AS "SELF-EXTINGUISHING".KAPTON CHARS BUT
    DOESNT BURN IN AIR.WILL BURN IN ATM OF 100%(SUPPL)

==================  Accidental Release Measures  ==================

Spill Release Procedures:REVIEW FIRE FIGHTING MEASURES &
    HDNLG(PERSONNEL)SECS BEF PROCEEDING W/CLEANUP.USE APPROP PPE DURING
    CLEANUP.PICK UP TO PREVENT SLIPPING HAZARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM FLAMM MATLS.
Other Precautions:MEDICAL USE:CAUTION:DONT USE IN MEDICAL APPLICATIONS
    INVOLVING PERMANENT IMPLANTATION IN HUMAN BODY.FOR OTHER MED
    APPLICATIONS SEE DUPONT CAUTION BULLETIN NO.H-50102.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:RESPIRATORS ARE NOT NEEDED FOR NORMAL USE.
Ventilation:SAF HNDLG OF FILMS @HI TEMPS(>200C)REQUIRES ADEQU VENTI.SM
    QUANT INVOLVED NORMAL AIR CIRCUL MAY BE ALL THATS (SUPP)
Protective Gloves:GLOVES RECOMMENDED AS GOOD IND PRACT
Eye Protection:SAF GLASSES RECOMMENDED AS GOOD IND PRAC
Other Protective Equipment:SPECIAL PROTECTIVE CLOTHING NOT NEEDED FOR
    NORMAL USE.
Work Hygienic Practices:WASH THOROUGHLY AFTER HNDLG.
Supplemental Safety and Health
FIRE/EXPLO:OXY.MAJOR OFF-GASES:CARBON DIOXIDE,CARBON
    MONOXIDE.PROCESSING OF KAPTON POLYIMIDE FILMS CAN CAUSE GENERATION
    OF STATIC CHARGE.PRECAUT FOR STATIC CHARGES SHOULD ALSO BE TAKEN
    WHEN REMOVING P LASTIC FILMS USED AS PROTECTIVE PKG FORKAPTON.
    VENTI:NEEDED IN CASE OF OVERHEAT.DEPENDS ON FILM QUANT,TEMP,EXPO
    TIME.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:NP
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NP
Vapor Pres:NP
Vapor Density:NP
Spec Gravity:>1.4
pH:NP
Viscosity:NP
Evaporation Rate & Reference:NP
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSPARENT FILM, LIGHT AMBER COLOR, NO ODOR
Percent Volatiles by Volume:1 MAX
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AT TEMPS >400C MAJOR OFF-GASSES ARE
    CARBON MONOXIDE & CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:AQUATIC TOXICITY.INSOLUBLE.LANDFILL OR
    INCINERATE IN COMPLIANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***