=====================  Product Identification  =====================

MSDS NAME:0366 ZEP DYNA 143
NIIN:00F056947
Status Code:A
MSDS Number: CHZYK
=== Responsible Party ===
Company:ZEP MFG COMPANY
Address:1310 SEABOARD INDUSTRIAL BLVD NW
Box:2015
City:ATLANTA
State:GA
ZIP:30301-5000
Country:US
Info Phone Num:404-432-2873/404-351-2952
Emergency Phone Num:404-352-1680/404-435-2973
CAGE:EO578
=== Contractor Identification ===
Company:ZEP MANUFACTURING COMPANY
Address:1310 SEABOARD INDUSTRIAL BLVD NW
Box:2015
City:ATLANTA
State:GA
ZIP:30318
Country:US
Phone:877-428-9937
CAGE:27674
Company:ZEP MFG COMPANY
Box:2015
City:ATLANTA
State:GA
ZIP:30301
Country:US
Phone:404-352-1680/404-996-0844
CAGE:EO578

=============  Composition/Information on Ingredients  =============

Name:MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES
    MINERAL SPIRITS		   *98-3*
CAS:64742-88-7
Fraction by Wt: >90%
Other REC Limits:100 PPM
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: OVEREXPOSURE MAY CAUSE
    MUCOUS MEMBRANE IRRITATION TO EYES & RESPIRATORY TRACT. CNS
    DEPRESSION. INGESTION: ASPIRATION OF VOMITUS FLUID, MAY PRODUCE
    CHEMICAL PNEUMONIA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, DIZZINESS, NAUSEA,
    STUPOR, UNCONSCIOUSNESS
Medical Cond Aggravated by Exposure:EXISTING RESPIRATORY DISORDERS &
    LUNG DISEASES.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH THOROUGHLY W/SOAP/MILD DETERGENT. APPLY SKIN CREAM
    W/LANOLIN. EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS.
    INHALATION: MOVE TO FRESH AIR. INGESTION: DON'T INDUCE VOMITING. IF
    VOMI TING OCCURS, KEEP HEAD BELOW HIP LEVEL.OBTAIN MEDICAL
    ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:143F
Lower Limits:1
Upper Limits:7
Extinguishing Media:CO2, DRY CHEMICAL, WATER FOG, FOAM
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:DIRECT WATER ONTO INTACT CONTAINERS TO
    PREVENT BURSTING.

==================  Accidental Release Measures  ==================

Spill Release Procedures:IMMEDIATELY ELIMINATE ALL IGNITION/HEAT
    SOURCES. ABSORB ON INERT ABSORBENT. PICKUP & PLACE RESIDUE IN A
    CLEAN DOT CONTAINER FOR DISPOSAL. WASH AREA THOROUGHLY W/A
    DETERGENT SOLUTION & RINSE WELL W/WAT ER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE & USE AWAY FROM HEAT/SPARKS/OPEN
    FLAMES/ANY OTHER IGNITION SOURCES. STORE TIGHTLY CLOSED CONTAINER
    IN A DRY AREA AT TEMPS BETWEEN 40-120F.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP PRODUCT AWAY FROM
    SKIN & EYES. DON'T BREATHE SPRAY MISTS/VAPORS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHEN EXPOSURE LEVELS EXCEED PEL/TLV, LIKELY IN
    CONFINED AREAS, USE AN ORGANIC VAPOR RESPIRATOR.
Ventilation:LOCAL EXHAUST VENTILATION AS NEEDED TO KEEP CONCENTRATION
    OF VAPORS BELOW EXPOSURE LIMITS-PEL/TLV.
Protective Gloves:NEOPRENE, NITRILE/NATURAL RUBBER
Eye Protection:TIGHT FITTING SPLASHPROOF SAFETY GLASSES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
    BEFORE REUSE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:368F
Vapor Pres:<1
Vapor Density:5.3
Spec Gravity:0.79
Evaporation Rate & Reference:(BUTYL ACETATE=1): 0.14
Solubility in Water:INSOLUBLE
Appearance and Odor:A CLEAR, WATER-WHITE LIQUID W/A MILD ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, OPEN FLAMES, SPARKS
Hazardous Decomposition Products:CO, CO2, UNIDENTIFIED ORGANIC
    COMPOUNDS

====================  Disposal Considerations  ====================

Waste Disposal Methods:UNUSABLE LIQUID MAY BE ABSORBED ON AN INERT
    ABSORBENT MATERIAL, DRUMMED & TAKEN TO A CHEMICAL/INDUSTRIAL
    LANDFILL. PRETREATMENT MAY BE REQUIRED BEFORE LANDFILLING. DISPOSE
    OF IAW/LOCAL, STATE & FEDERA L REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***