===================== Product Identification =====================
MSDS NAME:SODIUM HYDROXIDE, PURUM PELLETS, BW359500
Status Code:A
MSDS Number: CJFXZ
=== Responsible Party ===
Company:FISHER SCIENTIFIC
Address:1 REAGENT LANE
City:FAIRLAWN
State:NJ
ZIP:07410
Country:US
Emergency Phone Num:201-796-7100
Chemtrec Ind/Phone:(800)424-9300
CAGE:1B464
=== Contractor Identification ===
Company:FISHER SCIENTIFIC CO. CHEMICAL MFG DIV
Address:1 REAGENT LANE
Box:City:FAIRLAWN
State:NJ
ZIP:07410-2802
Country:US
Phone:201-796-7100
CAGE:1B464
============= Composition/Information on Ingredients =============
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Minumum % Wt:10.
Maxumum % Wt:25.
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3
Name:XYLENE; (XYLENE, MIXTURE OF ISOMERS)
CAS:1330-20-7
RTECS #:ZE2100000
Minumum % Wt:1.
Maxumum % Wt:10.
OSHA PEL:435 MG/M3, S
OSHA STEL:650 MG/M3, S
ACGIH TLV:434 MG/M3;100 PPM
ACGIH STEL:651 MG/M3;150 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:ETHYLBENZENE
CAS:100-41-4
RTECS #:DA0700000
Minumum % Wt:1.
Maxumum % Wt:10.
OSHA PEL:435 MG/M3;100 PPM
OSHA STEL:545 MG/M3, S
ACGIH TLV:434 MG/M3;100 PPM
ACGIH STEL:543 MG/M3;125 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: VAPOR HARMFUL. MAY AFFECT
THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA.
CAUSES NOSE AND THROAT IRRITATION. EYE CONTACT: CAUSES IRRITATION.
SKIN CONTACT: CAUSES IRRITAT ION. CAN BE ABSORBED THROUGH SKIN. MAY
CAUSE ORGAN DAMAGE. INGESTION: MAY BE FATAL IF SWALLOWED AND MAY
CAUSE ORGAN DAMAGE. NOTICE: REPORTS HAVE ASSOCIATED REPEATED AND
PROLONGED OCCUPATIONAL OVEREXPO SURE TO SOLVENTS WITH PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING AND INHALING CONTENTS MAY BE HARMFUL OR FATAL.
Explanation of Carcinogenicity:CONTAINS NO INGREDIENTS LISTED AS KNOWN
OR SUSPECTED CARCINOGENS.
Effects of Overexposure:SEE HEALTH HAZARDS.
======================= First Aid Measures =======================
First Aid:IN ALL CASES OF DOUBT, OR WHEN SYMPTOMS PERSIST, SEEK MED
ATTN. INHAL: REMOVE TO FRESH AIR. IF DISCOMFORT IS PRESENT OR
BREATHING IS ABSENT GET MED ATTN IMMEDIATELY. EYES: FLUSH
IMMEDIATELY WITH PLENT Y OF WATER FOR 15 MINUTES UNTIL IRRITATION
SUBSIDES. IF IRRITATION PERSISTS, GET MED ATTN. SKIN: FLUSH WITH
LARGE AMOUNTS OF WATER. USE SOAP IF AVAILABLE. REMOVE SEVERELY
CONTAMINATED CLOTHING (INCLUD ING SHOES) & WASH BEFORE REUSE. IF
IRRITATION PERSISTS, GET MED ATTN. INGEST: IF SWALLOWED, DO NOT
INDUCE VOMITING. KEEP AT RESH. GET PROMPT MED ATTN. NEVER GIVE
ANYTHING BY MOUTH TO AN UNCONSCIOUS PE RSON.
===================== Fire Fighting Measures =====================
Flash Point:=38.3C, 101.F
Lower Limits:1%
Extinguishing Media:FOAM, CARBON DIOXIDE. DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:OSHA CLASSIFICATION: COMBUSTIBLE LIQUID -
CLASS II. ISOLATE FROM HEAT, SPARKS, ELECTRICAL EQUIPMENT & OPEN
FLAME. CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.
IN THE ABSENCE OF ELECTRIC ITY, A WATER SPRAY (A FOG NOZZLE IS
PREFERRED) MAY BE USED TO COOL CONTAINERS. DECOMP & COMBUST
PRODUCTS MAY BE TOXIC.
================== Accidental Release Measures ==================
Spill Release Procedures:CONTAIN SPILLED LIQUID WITH SAND OR EARTH. DO
NOT USE COMBUSTIBLE MATERIALS SUCH AS SAWDUST. ABSORB SPILL WITH AN
INERT MATERIAL (E.G., DRY SAND OR EARTH), THEN PLACE IN A CHEMICAL
WASTE CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINER CLOSED. LOOSEN CLOSURE
CAUTIOUSLY BEFORE OPENING. STORE IN A COOL, WELL VENTILATED PLACE
AWAY FROM INCOMPATIBLE MATERIALS (STRONG OXIDIZING AGENTS). KEEP
AWAY FROM HEAT, SPARKS & FLAMES . PROTECT MATERIAL FROM DIRECT
SUNLIGHT.
Other Precautions:GROUND AND BOND CONTAINERS WHEN TRANSFERRING
MATERIALS. EMPTY CONTAINERS MAY RETAIN HAZARDOUS PROPERTIES. FOLLOW
ALL MSDS/LABEL WARNINGS, EVEN AFTER THE CONTAINER IS EMPTIED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE A NIOSH APPROVED RESPIRATOR I/A/W 29 CFR
1910.134 TO REMOVE PARTICULATES (AND VAPORS IF THERE IS
OVEREXPOSURE TO VAPORS GENERATED DURING THE PROCESSING OF THIS
PRODUCT.)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO: A) KEEP TLV
OF HAZ INGS BELOW LIMS SPECIFIED; B) REMOVE VOLATS PRDCD DURING
CURE & DECOMP PRODS PRDCD (SUPP DATA)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES & FULL LENGTH
FACESHIELD .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
CLOTHING: AS NEEDED, USE BODY PROTECTION TO AVOID CONTACT WITH
PRODUCT.
Supplemental Safety and Health
VENT: DURING WELDING OR CUTTING ON SURFACES COATED WITH THIS PRODUCT.
================== Physical/Chemical Properties ==================
Boiling Pt:=137.2C, 279.F
Vapor Density:HVR/AIR
Spec Gravity:1.07
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:WHITE LIQUID.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:THIS PRODUCT IS STABLE.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMPOSITION AS IN WELDING. FUMES MAY PRODUCE CARBON
DIOXIDE & CARBON MONOXIDE.
Conditions to Avoid Polymerization:HAZARDOUS POLYMERIZATION WILL NOT
OCCUR.
=================== Toxicological Information ===================
Toxicological Information:THERE IS NO DATA AVAILABLE ON THE PRODUCT
ITSELF. XYLENE: THERE IS A RISK OF ABSORPTION THROUGH UNBROKEN
SKIN.
===================== Ecological Information =====================
Ecological:THERE IS NO DATA AVAILABLE ON THE PRODUCT ITSELF.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE AND FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
=================== MSDS Transport Information ===================
Transport Information:DOT (DEPARTMENT OF TRANSPORTATION): PROPER
SHIPPING NAME: PAINT. HAZARD CLASS: FLAMMABLE LIQUID, 3. UN NUMBER:
UN1263. PACKING GROUP: PACKING GROUP III.
===================== Regulatory Information =====================
SARA Title III Information:SARA TITLE III (SUPERFUND AMENDMENTS AND
REAUTHORIZATION ACT): SECTION 302 REPORTABLE INGREDIENTS:: NONE
KNOWN. 313 REPORTABLE INGREDIENTS: ETHYLBENZENE - 100-41-4; XYLENE,
MIXTURE OF ISOMERS - 1330-2 0-7.
Federal Regulatory Information:WHMIS CLASSIFICATION: CLASS B, DIVISION
3. OSHA REPORTABLE HAZARDOUS COMPONENTS (20 CFR 1910.1200). TSCA
(TOXIC SUBSTANCE CONTROL ACT): COMPONENTS OF THIS PRODUCT ARE
LISTED ON THE TSCA INVENTORY. CER CLA (COMPREHENSIVE RESPONSE
COMPENSATION AND LIABILITY ACT): MFR RECOMMENDS YOU CONTACT LOCAL
AUTHORITIES TO DETERMINE IF THERE MAY BE OTHER LOCAL REPORTING
REQUIREMENTS.
State Regulatory Information:CALIFORNIA PROPOSITION 65: WARNING: THIS
PRODUCT CONTAINS CHEMICAL(S) KNOWN TO THE STATE OF CALIFORNIA TO
CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM: NONE KNOWN.
======================= Other Information =======================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|