===================== Product Identification =====================
MSDS NAME:PROPYLENE OXIDE, PX1875
Status Code:A
MSDS Number: CJYHJ
=== Responsible Party ===
Company:EM INDUSTRIES
Address:480 DEMOCRAT RD
Box:70
City:GIBBSTOWN
State:NJ
ZIP:08027
Country:US
Info Phone Num:856-423-6300
Emergency Phone Num:800-424-9300
Chemtrec Ind/Phone:(800)424-9300
CAGE:63612
=== Contractor Identification ===
Company:E M SCIENCE DIV OF E M INDUSTRIES INC
Address:480 DEMOCRAT ROAD
Box:70
City:GIBBSTOWN
State:NJ
ZIP:08027
Country:US
Phone:800-222-0342/609-423-6300
CAGE:63612
============= Composition/Information on Ingredients =============
Name:PROPYLENE OXIDE
CAS:75-56-9
RTECS #:TZ2975000
= Wt:100.
OSHA PEL:240 MG/M3;100 PPM
ACGIH TLV:48 MG/M3;20 PPM
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50: (ORAL,RAT) 380 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: TOXIC BY INGESTION, INHALATION
AND SKIN ABSORPTION. CAUSES HEADACHE, NAUSEA, DIZZINESS, ABDOMINAL
PAIN, DROWSINESS, LUNG INJURY, EDEMA. INHALATION AGGRAVATES
PRE-EXISITNG LUNG DISORDERS SUCH AS ASTHMA. CONTACT WITH SKIN OR
EYES CAUSES IRRITATION, POSSIBLY SEVERE. MAY CAUSE BURNS ON CONTACT
WITH EYES, MOUTH, THROAT OR ESOPHAGUS.
Explanation of Carcinogenicity:PROPYLENE OXIDE: IARC MONOGRAPHS,
SUPPLEMENT, VOL 7, PG 328, 1987: GROUP 2B. NTP 8TH ANNUAL RPT ON
CARCINS, 1998: REASONABLY ANTIC TO BE HUMAN CARCIN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:INHALATION AGGRAVATES PRE-EXISING
LUNG DISORDERS SUCH AS ASTHMA.
======================= First Aid Measures =======================
First Aid:GET MEDICAL ASSISTANCE FOR ALL CASES OF OVEREXPOSURE. SKIN:
WASH THOROUGHLY WITH SOAP AND WATER. EYES: IMMEDIATELY FLUSH
THOROUGHLY WITH WATER FOR AT LEAST 15 MINUTES. INHALATION: REMOVE
TO FRESH AIR; GIVE ARTIFICIAL RESPIRATION IF BREATHING HAS
STOPPED. INGESTION: DO NOT INDUCE VOMITING; GET IMMEDIATE MEDICAL
ATTENTION. REMOVE CONTAMINATED CLOTHING AND WASH BEFORE REUSE.
===================== Fire Fighting Measures =====================
Flash Point Method:TOC
Flash Point:=-37.2C, -35.F
Lower Limits:2.10%
Upper Limits:38.50%
Extinguishing Media:CO*2, DRY CHEMICAL, WATER SPRAY, "ALCOHOL" FOAM. DO
NOT COMPLETELY EXTINGUISH FLAMES DUE TO POSSIBILITY OF EXPLOSIVE
RE-IGNITION; ALLOW FIRE TO BURN OUT.
Fire Fighting Procedures:WEAR NIOSH APPROVED SELF-CONTAINED BREATHING
APPARATUS AND PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:VAPOR CAN TRAVEL DISTANCES TO IGNITION
SOURCE AND FLASH BACK. FORMS EXPLOSIVE REACTION WITH EPOXY RESIN
AND SODIUM HYDROXIDE. FORMS EXPLOSIVE MIXTURES WITH OXYGEN.
================== Accidental Release Measures ==================
Spill Release Procedures:EVACUATE AREA OF ALL UNNEC PERSONNEL. WEAR
SUITABLE PROT EQUIP LISTED UNDER EXPOS/PERSONAL PROT. ELIM ANY
IGNIT SOURCES UNTIL AREA IS DETERM TO BE FREE FROM EXPLO/FIRE HAZS.
CNTN RELEASE & ELIM ITS SO URCE, IF THIS CAN BE DONE W/OUT RISK,
TAKE UP & CONTAINERIZE FOR PROPER DISPOSAL AS DESCRIBED UNDER
DISPOSAL. COMPLY W/FEDERAL, STATE, & LOC REGS ON REPORTING
RELEASES. (SUPDAT)
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
IN A COOL, WELL-VENTILATED AREA AWAY FROM IGNITION SOURCES. CHECK
PEROXIDE CONTENT BEFORE HEATING MATERIAL. DO NOT BREATHE VAPOR. DO
NOT GET IN EYES, ON SKIN, OR O N CLOTHING.
Other Precautions:ELECTRICALLY GROUND ALL EQUIPMENT WHEN HANDLING THIS
PRODUCT. RETAINED RESIDUE MAY MAKE EMTPY CONTAINERS HAZARDOUS; USE
CAUTION!
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF WORKPLACE EXPOSURE LIMIT(S) OF PROD/ANY
COMPONENT IS EXCEEDED (SEE TLV/PEL), A NIOSH APPROVED AIR SUPPLIED
RESPIRATOR IS ADVISED IN ABSENCE OF PROPER ENVIR CONTROL. OSHA REGS
ALSO PERMIT OTHER NIOS H RESPIRATORS (NEGATIVE PRESSURE TYPE) UNDER
SPECIFIED CNDTNS (SEE YOUR SAFETY EQUIP SUPPLIER).
Ventilation:ENGINEERING AND/OR ADMINISTRATIVE CONTROLS SHOULD BE
IMPLEMENTED TO REDUCE EXPOSURE . MATL MUST BE HNDLD/TRANSFERRED IN
AN NIOSH APPRVD (OTHER INFO)
Protective Gloves:PROT GLOVES(NITRILE, PVA/EQUIV) MUST BE WORN TO PVNT
SKIN CONTACT.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH & DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. DO NOT TAKE
INTERNALLY.
Supplemental Safety and Health
SPILL RELEASE PROC: REFER TO REGULATORY INFO FOR REPORTABLE QTY & OTHER
REGULATORY DATA. EM SCIENCE RECOMMENDS SPILL-X ABSORB AGENTS FOR
VARIOUS TYPES OF SPILL. ADDNL INFO ON SPILL-X PRODS CAN BE PROV
IDED THROUGH EM SCIENCE TECHNICAL SERVICE DEPARTMENT (609)
423-6300. FOLLOWING EM SCIENCE SPILL-X ABSORB (OTHER INFO)
================== Physical/Chemical Properties ==================
Boiling Pt:=34.C, 93.2F
Melt/Freeze Pt:=-104.C, -155.2F
Vapor Pres:422 @ 20C
Vapor Density:2.0(AIR=1)
Spec Gravity:0.830 (H*2O =1)
Evaporation Rate & Reference:>1 (BUAC =1)
Solubility in Water:40.5%
Appearance and Odor:COLORLESS LIQUID; ETHER-LIKE ODOR.
Percent Volatiles by Volume:99+
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ACIDS, BASES, OXIDIZERS. OTHER: ANHYDROUS METAL CHLORIDES, NH*4OH.
Stability Condition to Avoid:HEAT; CONTACT WITH IGNITION SOURCE.
Hazardous Decomposition Products:CO*X.
Conditions to Avoid Polymerization:MAY POLYMERIZE W/EVOLUTION OF HEAT
WHEN IN CONTACT WITH HIGHLY ACTIVE CATALYTIC SURFACES (SEE
COMMENTS).
=================== Toxicological Information ===================
Toxicological Information:TOXICITY DATA: ORL-RAT LD50: 380 MG/KG.
IHL-MUS LC50: 1740 PPM/4H. SK-RBT LD50: 1245 MG/KG. TOXICOLOGICAL
FINDINGS: TESTS ON LABORATORY ANIMALS INDICATE MATERIAL MAY CAUSE
TREMORS AND PRODUCE ADVERSE MUTAGENIC AND REPRODUCTIVE EFFECTS.
CITED IN REGISTRY OF TOXIC EFTS OF CHEMICAL SUBSTANCES (RTECS).
===================== Ecological Information =====================
Ecological:EXPOSURE GUIDELINES: OSHA-PEL: PROPYLENE OXIDE: TWA-20 PPM,
50 MG/M3. ACGIH-TLV: PROPYLENE OXIDE: TWA 20 PPM, 48 MG/M3. IF
THERE ARE NO EXPOSURE LIMIT NUMBER LISTED IN EXPOSURE GUIDLINES
CHART, THIS I NDICATES THAT NO OSHA OR ACGIH EXPOSURE LIMITS HAVE
BEEN ESTABLISHED.
==================== Disposal Considerations ====================
Waste Disposal Methods:EPA WASTE NO: D001. TREATMENT: INCINERATION,
FUELS BLENDING/RECYCLE. CONT YOUR LOC PERMITTED WASTE DISP SITE
(TSD) FOR PERMISSIBLE TREATMENT SITES. ALWAYS CONT PERMITTED WASTE
DISPOSER(TSD) TO ASSURE COMPLIANCE WITH ALL CURRENT LOCAL, STATE
AND FEDERAL REGULATIONS.
=================== MSDS Transport Information ===================
Transport Information:DOT PROPER SHIPPING NAME: PROPYLENE OXIDE. DOT ID
NUMBER: UN1280.
===================== Regulatory Information =====================
Federal Regulatory Information:TSCA STATEMENT: THE CAS NUMBER OF THIS
PROD IS LISTED ON TSCA INVENTORY. PROPYLENE OXIDE-SARA EHS (302) -
SARA EHS TPQ (LBS)-1000 CERCLA RQ (LBS) - 100. OSHA FLOOR LIST-YES,
SARA 313-YES. DEMINIMIS FO R SARA 313(%)-0.1. IF THERE IS NO INFO
LISTED ON REGULATORY INFO CHART, THIS INDICATES THAT CHEM IS NOT
COVERED BY SPECIFIC REGULATION LISTED.
State Regulatory Information:SUSPECT CANCER HAZARD. MAY CAUSE CANCER.
WARNING: THIS PRODUCT CONTAINS CHEMICAL(S) KNOWN TO STATE OF
CALIFORNIA TO CAUSE CANCER.
======================= Other Information =======================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|