=====================  Product Identification  =====================

MSDS NAME:A-C POLYURETHANE
NIIN:00N093469
Status Code:A
MSDS Number: CJYGP
=== Responsible Party ===
Company:ALLIED-SIGNAL INC
Box:2332R
City:MORRISTOWN
State:NJ
ZIP:07962-2332
Country:US
Info Phone Num:201-455-4414
Emergency Phone Num:201-455-2000
CAGE:1L164
=== Contractor Identification ===
Company:ALLIED-SIGNAL INC
Box:2332R
City:MORRISTOWN
State:NJ
ZIP:07962-2332
Country:US
Phone:201-455-4414
CAGE:1L164

=============  Composition/Information on Ingredients  =============

Name:POLYETHYLENE. MOLECULAR WEIGHT: POLYMERIC>1100; MOLECULAR
    FORMULA (C*2H*4)*8
CAS:9002-88-4
RTECS #:KX3270000

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50: (ORAL,RAT) >2000 MG/KG
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: TREAT POWDERED
    GRADES AS NUISANCE PARTICULATES. AVOID BREATHING FUMES FROM MOLTEN
    MATERIAL. INGESTION: NO EFFECTS KNOWN. SKIN: MILD DERMAL IRRITANT.
    EYES: NON-EYE IRRITANT. DUST MAY  CAUSE MECHANICAL IRRITATION.
    CHRONIC: NO KNOWN HAZARDS ASSOCIATED WITH THE CUSTOMARY INDUSTRIAL
    USE OF THESE PRODUCTS.
Effects of Overexposure:SEE HEALTH HAZARDS.

=======================  First Aid Measures  =======================

First Aid:INGEST: CALL MD IMMEDIATELY . SKIN: FLUSH W/COPIOUS AMOUNTS
    OF WATER. . INHAL (OF POWDER) - REMOVE TO FRESH AIR. EYES: EYE
    CONTACT MECHANICAL IRRITATION: WASH WITH WATER FOR AT LEAST 15 MI
    NUTES. IF IRRITATION PERSISTS, CONSULT PHYSIICAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:>231.C, 447.8F
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FINE WATER SPRAY.
    FIRE EXTINGUISHING AGENTS TO AVOID: WATER STREAM ON MOLTEN BURNING
    MATERIAL MAY SCATTER AND SPREAD FIRE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . WATCH FOOTING ON FLOORS AND STAIRS BECAUSE OF POSSIBLE
    MELTING AND SPREADING. USE SPRAY TO KEEP CONTAINERS COOL.
Unusual Fire/Explosion Hazard:FIRE POINT >313C. MELTS IN PROXIMITY TO
    FIRES CAUSING SLIPPERY FLOORS & STAIRS. STATIC CHARGES ON POWDERS
    OR POWDERS IN LIQUIDS MAY IGNIT FLAMMABLE ATMOSPHERES. REFER TO
    BULLETIN 654 FOR SAFE HANDLING  PROCEDURES (SEE SECTION
    J-REFERENCES).

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE IGNITION SOURCES FROM THE POWDERED
    GRADES. KEEP AWAY FROM HEAT OR FLAME. SWEEP UP WITH A MINIMUM OF
    DUSTING. COLLECT IN CONTAINER, E.G., FIBERBOARD DRUM OR CARTON.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID BREATHING FUMES FROM HEATING
    OPERATIONS. VERY SLIPPERY ON FLOORS, AVOID SPILLAGE. USE GOOD
    PERSONAL HYGIENE AND HOUSEKEEPING. AVOID EXCESSIVE HEAT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE A NIOSH APPROVED DUST RESPIRATOR FOR
    POWDERED GRADES WHEN DUSTY CONDITIONS PREVAIL. DURING MELTING OR
    CONVEYING IN MOLTEN STATE USE AN NIOSH APPROVED ORGANIC VAPOR
    RESPIRATOR.
Ventilation:USE ADEQ VENT DURING HEATING PROCESSES OR IF DUSTY CNDTNS
    PREVAIL WHEN HNDLG POWDERS. FOR STORAGE & ORDINARY HNDLG, GEN VENT
    IS ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH & DELUGE SHOWER MEETING ANSI DESIGN
    CRITERIA . PROTECTIVE GARMENTS AROUND MOLTEN MATERIAL.
Work Hygienic Practices:USE GOOD PERSONAL HYGIENE AND HOUSEKEEPING.
Supplemental Safety and Health
APPEAR/ODOR: OR POWDER. CHARACTERISTIC WAXY ODOR.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:>92.C, 197.6F
M.P/F.P Text:(SOFT PT) 92-117C
Vapor Pres:NEGLIGIBLE @ AMBIENT
Spec Gravity:SOLID 0.88-9.94(H*2O =1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:A-C 1702 GREASE-LIKE. ALL OTHER WHITE, WAXY SOLID
    IN PELLETS, PRILLS (SUPDAT)

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ALTHOUGH COMPARATIVELY STABLE AS ARE OTHER
    POLYETHYLENES.
Stability Condition to Avoid:EXCESSIVE HEAT. A-C 1702 STARTS BREAKING
    DOWN AT TEMPERATURES OVER 100C; OTHER PRODUCTS ARE MORE STABLE.
    AVOID DIRECT CONTACT WITH OPEN FLAME.
Hazardous Decomposition Products:DEPENDS ON CONDITION OF FIRE. CO,
    CO*2, AND COMBUSTIBLE GASES MAY BE GENERATED.

===================  Toxicological Information	===================

Toxicological Information:NO KNOWN HAZARDS ASSOCIATED WITH THE
    CUSTOMARY INDUSTRIAL USE OF THESE PRODUCTS.

=====================  Ecological Information  =====================

Ecological:DEGRADABILITY/AQUATIC TOXICITY: NOT CONSIDERED BIODEGRADABLE
    OR TOXIC.

====================  Disposal Considerations  ====================

Waste Disposal Methods:MUST COMPLY WITH FEDERAL, STATE AND LOCAL
    DISPOSAL OR DISCHARGE LAWS. DISCARD AS NON-HAZARDOUS ORGANIC SOLID
    WATER.

===================  MSDS Transport Information  ===================

Transport Information:D.O.T. CLASSIFICATION: NOT REGULARED. SOME STATE
    REGULATE THE DISCHARGE OF POLYETHYLENE POLYMERS TO STREAMS. FDA:
    ALLIED TECHNICAL DATA BULLETIN GEN-02.

=====================  Regulatory Information  =====================

SARA Title III Information:UNDER THE CRITERIA ESTABLISHED FOR HAZARDOUS
    CHEMICALS IN THE OSHA HAZARDOUS COMMUNICATION ACT AND SARA TITLE
    III. THESE MATERIALS ARE CONSIDERED NON-HAZARDOUS. THEY DO NOT
    CONTAIN EXTREMELY HAZARDOUS  SUBSTANCES (SECTION 302) OR TOXIC
    CHEMICALS (SECTION 313).
Federal Regulatory Information:THESE PRODUCTS ARE INCLUDED IN THE TSCA
    CHEMICAL SUBSTANCE INVENTORY. RCRA STATUS OF UNUSED MATERIAL IF
    DISCARDED: NON-HAZARDOUS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***