Search   
MSDS  
:
 O-T-620C,TRICHLOROETHANE-1,1,1,TECH INHIBTD
CAS  
:
 71-55-6
NAME  
:
 1,1,1-trichloroethane
=====================  Product Identification  =====================

MSDS NAME:O-T-620C,TRICHLOROETHANE-1,1,1,TECH INHIBTD
NIIN:00-527-1458
Status Code:A
MSDS Number: CLBKR
=== Responsible Party ===
Company:AMERICAN WRITING INK CO. INC.
Address:33 ENDICOTT STREET
City:NORWOOD
State:MA
ZIP:02062-3006
Country:US
Info Phone Num:617-762-0026
Emergency Phone Num:617-482-9167
CAGE:82956
=== Contractor Identification ===
Company:AMERICAN INK AND OIL CORP
Address:33 ENDICOTT STREET
Box:City:NORWOOD
State:MA
ZIP:02062-3006
Country:US
Phone:781-762-0026 / FAX: 781-762-1617
CAGE:82956

=============  Composition/Information on Ingredients  =============

Name:1,1,1-TRICHLOROETHANE
CAS:71-55-6
RTECS #:KJ2975000
= Wt:100.
OSHA PEL:350 PPM
ACGIH TLV:350 PPM
ACGIH STEL:450 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1

=====================  Hazards Identification  =====================

Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE: MAY CAUSE PAIN, SLIGHT IRRITATION
    WITH TEMPORARY CORNEAL INJURY. SKIN: PROLONGED OR REPEATED EXPOSURE
    MAY CAUSE SKIN IRRITATION. MAY CAUSE DRYING OR FLAKING. NOT LIKELY
    TO RESULT IN ABSORBTION OF	HARMFUL AMOUNTS. INHALATION: CAN CAUSE
    ANESTHETIC EFFECT, DIZZINESS, UNCONSIOUSNESS AND DEATH AT HIGH
    CONCENTRATIONS.
Effects of Overexposure:BASED ON AVAILABLE DATA, REPEATED EXPOSURE NOT
    LIKELY TO CAUSE SIGNIFICANT ADVERSE EFFECTS.  BIRTH DEFECTS ARE
    UNLIKELY.
Medical Cond Aggravated by Exposure:OVEREXPOSURE IF ACCOMPANIED
    BYANOXIA MAY TEMPORARILY INCREASES CARDIAC IRRITABILITY. AVOID
    ADMINISTERING ADRENILIN, EPIMEPHRILINE WHICH MAY PRECIPITATE
    ARRHYTHMIAS.

=======================  First Aid Measures  =======================

Eyes: IRRIGATE IMMEDIATELY WITH WATER AT LEAST 15 MINITUES.
    SKIN: WASH OFF IN FLOWING WATER. INGESTION: DO NOT INDUCE VOMITING.
    CALL DOCTOR. INHALATION: REMOVE TO FRESH AIR. ADMINISTER OXYGEN OR
    MOUTH -TO-MOUTH RESUSITATION IF NOT BREATHING.

=====================  Fire Fighting Measures  =====================

Lower Limits:7.5
Upper Limits:12.5
Extinguishing Media:WATER FOG
Fire Fighting Procedures:WEAR POSITIVE PRESSUREE, SCBA
Unusual Fire/Explosion Hazard:VAPORS MAY DEVELOP A FLAMMABLE ATMOSPHERE
    IN CONFINED OR POORLY-VENTILATED AREAS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:MOP UP, WIPE UP OR SOAK UP IMMEDIATELY. REMOVE
    TO OUT-OF-DOORS. IF LARGE SPILL, CONTAIN LIQUID, TRANSFER TO CLOSED
    METAL CONTAINERS. KEEP OUT OF WATER SIPPLIES.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL DRY AREA AWAY FROM
    DIRECT SUNLIGHT.
Other Precautions:KEEP FROM REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:USE GLOVES, BOOTS, APRON WHEN APPROPIATE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:=74.C, 165.2F
B.P. Text:74C 165F
Vapor Pres:100 @ 20C
Vapor Density:1.321
Solubility in Water:0.07G/100G @ 25C
Appearance and Odor:COLORLESS LIQUID IRRITATING ODOR AT HIGH
    CONCENTRATIONS

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
PROLONGED CONTACT WITH ALUMINIUM AND RELATED ALLOUS (ZINC POWDER) THIS
    CAN CAUSE HYDROCHLORIC ACID GAS TO FORM AND RUPTURE CONTAINER ALSO
    CONTACT WITH CAUSTIC SODA OR OTHER OXIDIZING MATERIALS.
Stability Condition to Avoid:HIGH TEMPATURES SOURCES. AVOID OPEN FLAME.
    WELDING ARCS AND OTHER SOURCES WHICH INDUCE THERMAL DECOMPOSITION.
Hazardous Decomposition Products:HYDROGEN CHKLORIDE AND POSSIABLE
    TRACES OF PHOSQENE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PREFERRED OPTIONS ARE TO SEND TO LICENSED
    RECLAIMER OR TO PERMITTED INCINERATORS. DISPOSAL MUST BE IN
    COMPLIANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
SYNTHETIC GRAPHITE 7782-42-5
PROPYLENE GLYCOL CHALK 57-55-6
SILTEMP 188 CH 7631-86-9
HP 100 SEPIA ERADICATOR 7772-99-8
7732-18-5
67-64-1
110-49-6
7647-01-0
BULK RIBBON 44A418097-034 RIBBON CARTRIDGE 1333-86-4
62-53-3
90-94-8
TRANSFER ROLL 5200147/5200149 25038-59-9
8002-74-2
1333-86-4
GRILLMASTER SCOURING BRICKS & CHARROCK 60086
ISOPAR M ;PRODUCT CODE:133468-00635 64742-47-8
ANOX VCI 532-32-1
7632-00-0
FINGERPRINT INK 230/23IT 64742-55-8
STENCIL CORRECTION FLUID 60-29-7
64-17-5
67-56-1
EPOXY DRY ERASE MARKERS CHISEL TIP 108-10-1
123-86-4
DUPLICATING FLUID 67-56-1
DRY FORGE LUBRICANT 7782-42-5
14808-60-7
9004-32-4
INK 64742-96-7
64742-48-9
FINGER QUICK 9003-98-9
BLUE STENCIL CORRECTION FLUID 700 60-29-7
110-80-5
MIMEOGRAPH INK NO 610, 614, 614M 1333-86-4
AEROSOL PAINT 74-98-6
75-28-5
106-97-8
108-88-3
67-64-1
1330-20-7
75-09-2
REDCO PERLITE
SUPERTEMP 1900/RAMCOTE 1200 1302-78-9
7782-42-5
65997-15-1
68131-74-8
1332-58-7
61790-53-2
TYPE 2, SPIRIT DUPLICATING FLUID 67-56-1
64-17-5
110-80-5
ZINC-CHLORIDE BATTERY (AN ARTICLE OF COMMER 1313-13-9
7440-66-6
7440-44-0
7646-85-7
7439-92-1
7440-43-9
7439-97-6
ECODUSTER - 8 OZ (105598-1) 811-97-2
TARGO DRY (SEE SUPPLEMENTAL DATA) 112-34-5
110-12-3
79-01-6
9016-45-9
110-80-5
PHOSPHORIC ACID, 75-85%, TECHNICAL 7664-38-2
7732-18-5
PENAIR HD-4 MIL-PRF-87937C TYPE IV 34590-94-8
QUIK-COTE FINISHING CEMENT 7782-42-5
65997-15-1
1302-78-9
1317-65-3
7632-00-0
SODIUM SULFITE, ANHYDROUS 7757-83-7
PABCO SUPER CALTEMP GOLD 1344-95-2
1344-09-8
1332-21-4
9004-34-6
1309-37-1
14808-60-7
DRAWING INK 9065, BLACK 108-95-2
1303-96-4
TAPE, PRESSURESENSATIVE ADHESIVE 7439-92-1
ZL31-W FINE POINT CORRECTION PEN 108-87-2
POSTAGE METER INK 27554-26-3
64742-46-7
64742-53-6
O-T-620C,TRICHLOROETHANE-1,1,1,TECH INHIBTD 71-55-6
TRUE-RITE BLACK,BLUE,GREEN,VIOLET STAMP PAD 111-46-6
SECTA SOOTH INSECT BITE RELIEF 102-71-6
67-63-0
100-51-6
94-09-7
8001-54-5
TAPE HEAD CLEANING PAD, TX1301 67-63-0
KOAWOOL M-BOARD 65997-17-3
7631-86-9
GV SERIES GLOSS VINYL SCREEN INK 78-59-1
64742-94-5
763-69-9
123-42-2
1406-65-1
7440-50-8
KAOWOOL 1332-21-4
KAOWOOL 1332-21-4
NICKEL-CADMIUM AIRCRAFT BATTERY/CELL (SEE SUPPL DATA) 7440-43-9
21041-95-2
7440-02-0
12054-48-7
1310-58-3
7440-48-4
HYDROGEN PEROXIDE SOLUTION 50% H2O2 7722-84-1
7732-18-5
SCOTCH-WELD 1751 B/A PART B EPOXY ADHESIVE 68953-58-2
7631-86-9
25068-38-6
7429-90-5
2426-08-6
108-46-3
OMEGA 3248 312-6 75-09-2
67-63-0
108-88-3
1336-21-6
7775-11-3
MIL-P-24441/22 F-152 TYPE III WHITE COMP A, 3174200 13463-67-7
21645-51-2
112926-00-8
1330-20-7
71-36-3
68443-08-3
MIL-P-2441/22 F-152 TYPE III WHITE COMP B 14807-96-6
64742-95-6
25068-38-6
95-63-6
ADHESIVE PASTE- NO. 19 14808-60-7
1344-09-8
EPI SEAL BOMB SEALANT PART A 69102-90-5
8052-42-4
64742-95-6
77-58-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net