=====================  Product Identification  =====================

MSDS NAME:SATIN PLUS LATEX ACCENT INTERIOR SATIN LATEX PAINT 3544
Status Code:A
MSDS Number: CLPSP
=== Responsible Party ===
Company:SOPHIR CO.
Address:2702 DOUGLAS ST.
City:OMAHA
State:NE
ZIP:68131
Info Phone Num:(402) 345-3536
Emergency Phone Num:402-345-3536
Preparer's Name:MTF
CAGE:1FR68
=== Contractor Identification ===
Company:SOPHIR CO.
Address:2702 DOUGLAS ST.
Box:City:OMAHA
State:NE
ZIP:68131
Phone:(402) 345-3536
CAGE:1FR68

=============  Composition/Information on Ingredients  =============

Name:ETHYLENE GLYCOL
CAS:107-21-1
RTECS #:KW2975000
< Wt:5.
ACGIH STEL:C50 PPM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Effects of Overexposure:SKIN, EYES/MUCOUS MEMBRANE: MILD IRRITANT. 
    ABSORPTION MAY CAUSE KIDNEY DAMAGE AND DEPRESSION OF CENTRAL
    NERVOUS SYSTEM.  INHALATION: CONCENTRATED VAPORS MAY IRRITATE
    ASTHMATIC OR RESPIRATORY CONDITIO NS.
Medical Cond Aggravated by Exposure:PRE-EXISTING DERMATITIS, EYE OR
    RESPIRATORY DISORDERS.  PROLONGED AND REPEATED OVEREXPOSURE TO
    VAPORS MAY CAUSE DAMAGE TO KIDNEYS, LIVER, LUNGS, AND BLOOD OR
    CENTRAL NERVOUS SYSTEM.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH WATER FOR 15 MINUTES.  SKIN: WASH WITH SOAP
    AND WATER.	INHALATION: REMOVE TO FRESH AIR.  RESTORE BREATHING. 
    INGESTION: CALL A POISON CONTROL CENTER!  IN ALL CASES, SEEK
    IMMEDIATE MED ICAL ATTENTION!

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:=93.3C, 200.F
Lower Limits:3.2
Upper Limits:15.3
Extinguishing Media:DRY CHEMICAL, FOAM, CARBON DIOXIDE.
Fire Fighting Procedures:WATER MAY BE USED TO COOL CLOSED CONTAINERS TO
    PREVENT PRESSURE BUILD UP AND POSSIBLE AUTOIGNITION OR EXPLOSION
    WHEN EXPOSED TO EXTREME HEAT.  FULL PROTECTIVE EQUIPMENT INCLUDING
    NIOSH APPROVED SELF C ONTAINED BREATHING APPARATUS SHOULD BE USED. 
    WATER SPRAY MAY BE INEFFECTIVE.  IF WATER IS USED, FOG NOZZLES ARE
    PREFERA
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED.  ISOLATE
    FROM HEAT, SPARKS, AND OPEN FLAME.	CLOSED CONTAINERS MAY EXPLODE
    WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.  ABSORB ONTO
    INERT MATERIAL SUCH AS VERMICULITE, SAND, ETC.  COLLECT IN
    CONTAINERS FOR RE-USE, RECYCLING OR WASTE DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:DO NOT TAKE INTERNALLY.  AVOID PROLONGED CONTACT WITH
    SKIN.  KEEP OUT OF REACH OF CHILDREN.  AVOID EYE CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR TYPES SUITABLE
    FOR MATERIALS.  APPROVED CHEMICAL/MECHANICAL FILTERS RECOMMENDED
    WHEN VENTILATION IS RESTRICTED.
Ventilation:SUFFICIENT VENTILATION, IN VOLUME AND PATTERN, SHOULD BE
    PROVIDED TO KEEP AIR CONTAMINATION BELOW CURRENT EXPOSURE LIMITS.
Protective Gloves:RECOMMENDED FOR PROLONGED OR REPEATED CONTACT.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:AS REQUIRED TO AVOID WETTING CLOTHES.
Work Hygienic Practices:WASH HANDS WITH SOAP AND WATER BEFORE CONTACT
    WITH SKIN AND EYES.  LAUNDER CONTAMINATED CLOTHING BEFORE RE-USE.
Supplemental Safety and Health
LBS/GAL = 9.8

==================  Physical/Chemical Properties  ==================

Boiling Pt:=197.2C, 387.F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:100
Appearance and Odor:OPAQUE LIQUID WITH A MILD ODOR
Percent Volatiles by Volume:67.0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MATERIALS THAT REACT WITH WATER.
Stability Condition to Avoid:PROTECT FROM FREEZING OR EXPOSURE TO
    TEMPERATURES ABOVE 120 DEG F.

====================  Disposal Considerations  ====================

Waste Disposal Methods:RECYCLE SALVAGEABLE MATERIAL.  FLUSH AREA WITH
    WATER IF POSSIBLE.	DISPOSE OF RAG AND WASTED MATERIAL CAUTIOUSLY
    AND IN ACCORDANCE WITH APPROPRIATE LOCAL, STATE, AND FEDERAL
    REGULATIONS.

=====================  Regulatory Information  =====================

SARA Title III Information:ETHYLENE GLYCOL

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***