===================== Product Identification =====================
MSDS NAME:BELT CLEANER
NIIN:00-600-5624
MSDS Number: BFHQG
=== Responsible Party ===
Company:3M CO.
Address:3M AUSTIN CTR BLDG A 130-5N-51
Box:2963
City:AUSTIN
State:TX
ZIP:78769-2963
Country:US
Emergency Phone Num:800-854-0631
CAGE:76381
=== Contractor Identification ===
Company:MINNESOTA MINING AND MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
Company:MINNESOTA MINING AND MFG CO VISUAL SYSTEMS DIV
Address:3M AUSTIN CTR
Box:City:AUSTIN
State:TX
ZIP:78769-2963
Country:US
Phone:800-328-1371
CAGE:28217
============= Composition/Information on Ingredients =============
Name:ISOPROPYL ALCOHOL (SARA III)
CAS:67-63-0
RTECS #:NT8050000
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192
Name:SILICONE LUBRICANT, CAS# N/R
(0-10%)
Name:WETTING AGENT, CAS# N/R
(0-5%)
===================== Hazards Identification =====================
Effects of Overexposure:EYE:LIQ & VAP MAY IRRIT.SKIN:IRRIT,ISOPROPANOL
HAS CAUSE ALLERGIC SKIN REACT IN RARE OCCURENCES.SUPP
======================= First Aid Measures =======================
First Aid:EYE:FLUSH W/ H*2O FOR 10 MIN.GET PHYS.SKIN:WASH WITH SOAP &
WATER.INHAL:REMOVE TO FRESH AIR.CALL A PHYSICIAN.INGEST:DRINK TWO
GLASSES OF MILK OR WATER.CALL A PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point:53F,12C CC
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL
Fire Fighting Procedures:NONE KNOWN TO MFR
Unusual Fire/Explosion Hazard:NONE KNOWN TO MFR
================== Accidental Release Measures ==================
Spill Release Procedures:EXTINGUISH ALL IGNITION SOURCES.COLLECT
SPILLED MATERIAL,CLEAN UP RESIDUE & PLACE IN DEPT OF TRANSPORTATION
APPROVED CONTAINER.USE ABSORBENT MATERIAL AS NEEDED IN CLEAN UP
PROCEDURE.OBSERVE ALL PRECAU TIONARY INFORMATION.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM SPARKS,HEAT &
FLAMES.USE ONLY IN AREAS VENTILATED TO PREVENT VAPOR BUILD-UP.KEEP
CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions:DO NOT TAKE INTERNALLY.KEEP OUT OF THE REACH OF
CHILDREN.PREVENT CONTACT WITH EYES.AVOID PROLONGED CONTACT WITH
SKIN.CALLED MFR FOR VENT & PROT EQUIP.
============= Exposure Controls/Personal Protection =============
Ventilation:MECHANICAL TO REMOVE VAP & PREVENT VAP BUILD UP
Protective Gloves:RUBBER
Eye Protection:CHEMICAL GOGGLES
Supplemental Safety and Health
MSDS PREP.:NOV.21,1985.INHAL:VAP OVEREXPO MAY IRRIT RESPIR
SYSTEM.INGEST:SOLVENT ASPIRATION INTO LUNGS CAN CAUSE LUNG
DAMAGE,DEATH.OVEREXPO:DIGEST SYST
IRRIT,VOMIT,DIARRHEA,DIZZ,HDCH,DROW
================== Physical/Chemical Properties ==================
HCC:F2
Boiling Pt:=82.8C, 181.F
Vapor Density:2.07
Spec Gravity:0.9792
Solubility in Water:SOLUBLE
Appearance and Odor:CLEAR LIQUID,LIGHT PINK COLOR,ALCOHOL ODOR
Percent Volatiles by Volume:>90%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
N/K(PER MFR)
Stability Condition to Avoid:N/K(PER MFR)
Hazardous Decomposition Products:N/K(PER MFR)
==================== Disposal Considerations ====================
Waste Disposal Methods:RECLAMATION OR INCINERATION IN A PERMITTED
HAZARD WASTE FACILITY CAPABLE OF MEETING APPLIC REGUL FOR
DESTRUCTION & REMOVAL IS PREFERRED.OTHERWISE,DISPOSE IN ACCORDANCE
WITH APPLICABLE REGULATIONS(FEDE RAL,STATE AND LOCAL).US EPA WASTE
# D001(IGNIT).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|