=====================  Product Identification  =====================

MSDS NAME:RIP-12
NIIN:00B180011
MSDS Number: BBBTJ
=== Responsible Party ===
Company:RIP INC.
Address:5960 TENSION DRIVE
Box:8209
City:FT.WORTH
State:TX
ZIP:76124-0209
Country:US
Info Phone Num:429-7041
Emergency Phone Num:817457-5755
CAGE:8P580
=== Contractor Identification ===
Company:RIP INC.
Address:5960 TENSION DRIVE
Box:8209
City:FT.WORTH
State:TX
ZIP:76124-0209
Country:US
Phone:800-441-3637
CAGE:8P580

=============  Composition/Information on Ingredients  =============

Name:DICHLORODIFLUOROMETHANE  (SARA III)
CAS:75-71-8
RTECS #:PA8200000
Fraction by Wt: 100%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Ozone Depleting Chemical:1

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:INHALATION:VAPOR IS HEAVIER THAN AIR
    AND CAN CAUSE SUFFOCATION BY REDUCING OXYGEN AVAILABLE FOR
    BREATHING.VAPOR MAY CAUSE LIGHT-HEADEDNESS,GIDDINESS,SHORTNESS OF
    BREATH,AND MAY LEAD TO NARCOSIS,CARDIA C
    IRREGULARITIES,UNCONSCIOUSNESS OR DEATH.SKIN:LIQUID CONTACT CAN
    CAUSE FROSTBITE.EYE:SAME AS FOR SKIN.
Effects of Overexposure:SAME AS HEALTH HAZARDS ACUTE AND CHRONIC.
Medical Cond Aggravated by Exposure:CAN CAUSE CARDIAC IRREGULARITIES.

=======================  First Aid Measures  =======================

First Aid:INHALATION:REMOVE TO FRESH AIR,CALL A PHYSICIAN.IF NOT
    BREATHING,GIVE MOUTH-TO-MOUTH.IF BREATHING IS DIFFICULT,GIVE
    OXYGEN.DO NOT GIVE EPINEPHRINE OR SIMILAR DRUGS.EYE:IN CASE OF
    LIQUID CONTACT,IMMEDI ATELY FLUSH EYES WITH WATER FOR AT LEAST 15
    MIN.CALL PHYSICIAN.SKIN:FLUSH WITH WATER.TREAT FOR FROSTBITE IF
    NECESSARY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:NONE
Lower Limits:NONFLAMMABLE
Upper Limits:NONFLAMMABLE
Extinguishing Media:NONFLAMMABLE
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS MAY BE
    REQUIRED IF CYLINDERS RUPTURE AND CONTENTS ARE RELEASED UNDER FIRE
    CONDITIONS.
Unusual Fire/Explosion Hazard:CYLINDERS MAY RUPTURE UNDER FIRE
    CONDITIONS.DECOMPOSITIONS MAY OCCUR.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA,ESPECIALLY LOW PLACES WHERE
    HEAVY VAPORS MIGHT COLLECT.REMOVE FROM OPEN FLAMES.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CLEAN,DRY,AREA.DO NOT HEAT ABOVE 125F.
Other Precautions:AVOID BREATHING VAPORS AND LIQUID CONTACT WITH SKIN
    OR EYES.USE ONLY IN WELL VENTILATED AREA.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:UNDER NORMAL MANUFACTURING CONDITIONS,NO
    RESPIRATORY PROTECTION IS REQUIRED WHEN USING THIS PRODUCT.
Ventilation:NORMAL VENTILATION FOR STANDARD PROCEDURE.LOCAL EXHAUST
    WHEN LARGE AMTS.ARE RELEASED.MECHANICAL VENT.IN LOW PLACES.
Protective Gloves:LINED BUTYL GLOVES
Eye Protection:CHEMICAL SPLASH GOGGLES
Supplemental Safety and Health
SELF-CONTAINED BREATHING APPARATUS IS REQUIRED IF A LARGE RELEASE
    OCCURS.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:-21.6
Vapor Pres:80 @ 77F
Vapor Density:4.2
Solubility in Water:0.028% @ 77F
Appearance and Odor:CLEAR.SLIGHT ETHEREAL ODOR.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ALKALI OR ALKALINE EARTH METALS-POWDERED AL,ZN,BE,ETC.
Stability Condition to Avoid:OPEN FLAMES AND HIGH TEMPERATURES.
Hazardous Decomposition Products:CAN BE DECOMPOSED BY HIGH
    TEMPERATURES(OPEN FLAMES GLOWING SURFACES,ETC.)FORMING HYDROCHLORIC
    AND HYDROFLUORIC ACIDS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:COMPLY WITH FEDERAL,STATE,AND LOCAL
    REGULATIONS.RECLAIM BY DISTILLATION OR REMOVE TO A PERMITTED WASTE
    DISPOSAL FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***