===================== Product Identification =====================
MSDS NAME:SILICONE SEALANT
NIIN:00B180010
MSDS Number: BBBTH
=== Responsible Party ===
Company:RED DEVIL INCORPORATED
Address:WEBB STREET
Box:A
City:PRYOR
State:OK
ZIP:74362
Country:US
Emergency Phone Num:918825-5744
CAGE:DO902
=== Contractor Identification ===
Company:RED DEVIL INCORPORATED
Address:WEBB STREET
Box:A
City:PRYOR
State:OK
ZIP:74362
Country:US
CAGE:DO902
Company:RED DEVIL, INCORPORATED
Address:ONE WEBB STREET
Box:A
City:PRYOR
State:OK
ZIP:74361
Country:US
Phone:918-825-5744
CAGE:23577
============= Composition/Information on Ingredients =============
Name:TITANIUM DIOXIDE (IN WHITE PRODUCT ONLY)-(AS NUISANCE
PARTICULATE,TOTAL)
OSHA PEL:15
ACGIH TLV:10
Name:SILICA(AS AMORPHOUS SILICA,TOTAL DUST)
OSHA PEL:20
ACGIH TLV:20
Name:ETHYL TRIACETOXYSILANE-(AS ACETIC ACID)
OSHA PEL:10
ACGIH TLV:10
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:EYE,NOSE AND THROAT IRRITATION.POSSIBLE SKIN
IRRITATION.
======================= First Aid Measures =======================
Eyes:IMMEDIATELY FLUSH EYES W/LARGE AMOUNTS OF WATER WHILE
HOLDING THE EYELIDS OPEN.GET MEDICAL ATTENTION IF IRRITATION
PERSISTS.SKIN:WIPE MATERIAL FROM SKIN WITH CLOTH OR PAPER
TOWEL,THEN WASH EXPOSE D AREA WITH SOAP AND WATER.GET MEDICAL
ATTENTION IF IRRITATION PERSISTS.INHALATION:MOVE VICTIM TO FRESH
AIR.GET MEDICAL ATTENTION.INGESTION:CONTACT LOCAL POISON CONTROL
CENTER OR PHYSICIAN IMMEDIATELY
===================== Fire Fighting Measures =====================
Flash Point:>200 F
Extinguishing Media:CARBON DIOXIDE OR FOAM
Fire Fighting Procedures:NO SPECIAL PROCEDURES REQUIRED.
================== Accidental Release Measures ==================
Spill Release Procedures:WEAR PERSONAL PROTECTIVE EQUIPMENT.CLEAN UP
WITH ABSORBANT MATERIAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN CLOSED CONTAINER IN DRY
AREA.NOTE:DO NOT WEAR CONTACT LENSES WHILE APPLYING THIS
MATERIAL,AS ACETIC ACID VAPOR MAY BECOME TRAPPED IN LENSES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT NORMALLY REQUIRED.IF TLV IS EXCEEDED,OR FOR
SYMPTOMS OF OVEREXPOSURE,WEAR A NIOSH-APPROVED RESPIRATOR FOR
ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST MAY BE NECESSARY UNDER SOME HANDLING/USE
CONDITIONS.
Protective Gloves:NEOPRENE OR CHEMICAL RESISTANT IF NEEDED
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Vapor Density:>1
Spec Gravity:>1
Solubility in Water:INSOLUBLE
Appearance and Odor:THICK LIQUID;SLIGHT VINEGAR ODOR.
Percent Volatiles by Volume:<5
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
MOISTURE WILL RELEASE ACETIC ACID VAPOR.
Stability Condition to Avoid:EXTREME HEAT
Hazardous Decomposition Products:SILICON DIOXIDE,CARBON MONOXIDE,CARBON
DIOXIDE,TRACES OF FORMALDEHYDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL,STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|