=====================  Product Identification  =====================

MSDS NAME:UNSATURATED POLYESTER IN MONOMER DMMP, S-517
NIIN:00-633-8373
MSDS Number: BFJNS
=== Responsible Party ===
Company:STANDARD OIL ENGINEERED MATERIALS CO, SILMAR DIV
Address:12335 S VAN NESS AVE
City:HAWTHORNE
State:CA
ZIP:90250-3320
Country:US
Info Phone Num:213-757-1801
Emergency Phone Num:800-321-8642
Preparer's Name:RIGNEY
CAGE:IO024
=== Contractor Identification ===
Company:SILMAR DIV VISTRON CORP
Address:12335 S VAN NESS AVE
Box:City:HAWTHORNE
State:CA
ZIP:90250-3320
Country:US
CAGE:3H920
Company:STANDARD OIL ENGINEERED MATERIALS CO
Address:12335 S VAN NESS AVE
Box:City:HAWTHORNE
State:CA
ZIP:90250
Country:US
Phone:213-757-1801
CAGE:IO024

=============  Composition/Information on Ingredients  =============

Name:UNSATURATED POLYESTER
Fraction by Wt: <65%

Name:STYRENE MONOMER
CAS:57-11-4
RTECS #:WI2800000
Fraction by Wt: <43%
ACGIH TLV:100 PPM (MFR)

Name:PHOSPHONATE ESTER
Fraction by Wt: <6%

=====================  Hazards Identification  =====================

Effects of Overexposure:INHALATION:IRRIT TO ALL PARTS RESP TRACT. EYE:
    EXTREMELY IRRIT. SKIN: MODERATE IRRITATION.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR,GIVE ARTIF RESP IF NEEDED.SKIN:WASH
    W/SOAP & WATER,REMOVE CONTAMINATED CLOTH.EYE:FLUSH W/WATER 15
    MIN,HOLD EYELID AWAY FROM EYEBALL,SEE MD.INGEST:SEE MD IMMED.

=====================  Fire Fighting Measures  =====================

Flash Point:>87F,>31C
Lower Limits:1.1
Upper Limits:6.1
Extinguishing Media:USE DRY CHEM, ALL PURPOSE/POLAR TYPE AFFF
    FOAM/WATER SPRAY TO EXTINGUISH FIRE.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
    WATER/FOAM MAY CAUSE FROTH, W/FURTHER APPLICATN LEADING TO
    BOILOVER. FOAM MAY HAVE LIM EFTIVNESS ON 3 (SUPDAT)
Unusual Fire/Explosion Hazard:FIRE MAY PRDCE POISONOUS/IRRITATING GAS,
    FUMES/VAP. EXCESS HEAT MAY TRIGGER POLYM OF CONFINED MATL. CONTRS
    MAY EXPLODE IN HEAT OF FIRE. VAPS ARE (SUPDAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES.AVOID DIRECT
    SKIN CONTACT AND INHALATION OF CAPORS.USE ABSORBENT MATERIALS LIKE
    PERLITE AND VERMICULITE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM HEAT AND
    SUNLIGHT.MAINTAIN ADEQUATE SEPARATION FROM CATALYSTS AND PROMOTERS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
    EXPOSURE OF CONCERN
Ventilation:LOCAL
Protective Gloves:SOLVENT RESIST
Eye Protection:CHEM SAFETY GOGGLES
Supplemental Safety and Health
MFR MAKES SEVERAL RESINS WHICH CONFORM TO MIL-P-7575 WHICH IS PART OF
    PRODUCTS LISTED IN MIL-R-21607. TYPE: GRADE 1. PKG 1 GAL

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:293F,145C
Melt/Freeze Pt:M.P/F.P Text:-24F,-31C
Vapor Pres:<5
Vapor Density:3.6
Spec Gravity:1.09-1.28
Evaporation Rate & Reference:<1(WATER=1)
Solubility in Water:SLIGHT
Appearance and Odor:COLORLESS-YELLOW, REFRACTIVE OILY LIQUID; SWEET
    AROMATIC ODOR
Percent Volatiles by Volume:29-43

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Conditions to Avoid Polymerization:MIXING PROMOTERS & CATALYSTS
    TOGETHER,MIX INTO PROD SEPERATE

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONTAINERIZE WASTE FOR DISPOSAL.DISPOSE OR
    RECYCLE WASTE MATERIALS IAW,LOCAL,STATE AND FEDERAL REGS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***