=====================  Product Identification  =====================

MSDS NAME:ATA 101 AL,ATOMIZED AL POWDER,ATA 101 AL CO
NIIN:00-628-3383
MSDS Number: BFJMC
=== Responsible Party ===
Company:ALCAN-TOYO AMERICA,INC.
Address:17401 ROUTE 53
City:LOCKPORT
State:IL
ZIP:60441
Country:US
Info Phone Num:815-740-3000
Emergency Phone Num:815-740-3000/CHEMTREC 800-424-9300
Preparer's Name:DRR
CAGE:76424
=== Contractor Identification ===
Company:ALCAN-TOYO AMERICA INC AFFIL OF ALCON ALUMINUM CORP
Address:1717 N NAPER BLVD SUITE 201
Box:City:NAPERVILLE
State:IL
ZIP:60540
Country:US
Phone:708-505-2160
CAGE:76424
Company:BRAZILE METALS SERVICE
Address:2554 E 25TH STREET
Box:City:LOS ANGELES
State:CA
ZIP:90058-1211
Country:US
Phone:213-583-6922
CAGE:9R012

=============  Composition/Information on Ingredients  =============

Name:ALUMINUM  (SARA III)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: 100%
Other REC Limits:NONE SPECIFIED
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9192

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE-EYES: MAY CAUSE ABRASION. SKIN:
    IRRITATION ON REPEATED CONTACT. INHALATION: NUISANCE. LITTLE
    ADVERSE EFFECTS ON LUNGS WHEN EXPOSURES ARE KEPT UNDER CONTROL.
    INGESTION: NEGLIGIBLE EFFECTS. CHRONI C-NOT KNOWN.
Effects of Overexposure:MECHANICAL IRRITATION OF EYES, SKIN, THROAT AND
    RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:DUST MAY AGGRAVATE PRE-EXISTING
    RESPIRATORY DISORDERS.

=======================  First Aid Measures  =======================

First Aid:GET MEDICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR. EYES:
    IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES HOLDING EYELIDS OPEN.
    SKIN: REMOVE CONTAMINATED CLOTHING. WASH SKIN WITH SOAP AND WATER.
    INGES TION: GET MEDICAL HELP.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Lower Limits:2.0
Upper Limits:12.0
Extinguishing Media:USE CLASS "D" DRY CHEMICAL EXTINGUISHING AGENT OR
    DRY SAND. DO NOT USE CLASS A/B/C/HALOGENATED OR WATER.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS.
    GENTLY COVER THE BURNING POWDER AND FORM A RING AROUND IT WITH THE
    EXTINGUISHERS. DO NOT MIX. DO NOT ALLOW DUST CLOUDS.
Unusual Fire/Explosion Hazard:WATER AND BURNING FINELY DIVIDED ALUMINUM
    REACTS VIOLENTLY FORMING HYDROGEN GAS AND ALUMINUM OXIDE. ALUMINUM
    PARTICLES WILL BURN AND MAY EXPLODE IN AIR.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. AVOID
    EXPOSURE TO SPARKS, FIRE OR HOT METAL SURFACES. USING NON-SPARKING
    TOOLS, TRANSFER SPILLED MATERIAL TO A LEAK-PROOF CONTAINER FOR
    HAZARDOUS DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORAGE-STORE IN DRY PLACE AWAY FROM
    HEAT, FLAMES, MOISTURE, OXIDIZERS, ACIDS AND ALKALIES.
Other Precautions:GROUND EQUIPMENTS TO AVOID STATIC DISCHARGES. AVOID
    DUST-FORMING CONDITIONS AND DUST BUILD-UP, BECAUSE OF FIRE OR DUST
    EXPLOSION HAZARD. AVOID SMOKING, SPARKS, FRICTION OR IMPACT.
    STORAGE AREAS MUST B E OF FIRE RESISTANT CONSTRUCTION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED DUST RESPIRATOR OR SELF
    CONTAINED BREATHING APPARATUS OR SUPPLIED AIR RESPIRATOR IN
    CONFINED OR ENCLOSED SPACES IF NEEDED.
Ventilation:LOCAL/MECHANICAL (NON-SPARKING) EXHAUST TO MAINTAIN
    PEL/TLV. MINIMUM FACE VELOCITY OF 80 F.P.M. NO SMOKING OR OPEN
    LIGHT
Protective Gloves:RUBBER OR PLASTIC
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:EYE WASH STATION, SAFETY SHOWER, FLAME
    RETARDANT CLOTHING
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
    RECOMMENDED PROCEDURES. USE NON-SPARKING HANDLING EQUIPMENT.
Supplemental Safety and Health
MFR STATED THAT THE POWDER IS ATOMIZED & UNCOATED,SPHERICAL OR
    IRREGULAR SHAPE;THE MSDS SHOWING "X" BEFORE THE P/N IS STRICTLY FOR
    SPHERICAL POWDER COVERED BY MIL-A-23950 & MIL-A-82728.THE MSDS
    SHOWIN G STRAIGHT NO IS FOR IRREGULAR SHAPED PARTICLES POWDER FOR
    MIL-A-512;THIS ENTRY IS FOR P/N:ALCAN 101;REF:DGSC-SLM 87252H

==================  Physical/Chemical Properties  ==================

HCC:F8
Vapor Density:>1
Solubility in Water:NONE
Appearance and Odor:SILVER GRAY POWDER - NO ODOR
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, WATER, ACIDS, ALKALIES AND CHLORINATED
    HYDROCARBONS
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES, SPARKS AND OTHER
    SOURCES OF IGNITION
Hazardous Decomposition Products:CARBON MONOXIDE. ALUMINUM REACTS WITH
    WATER, ACIDS OR ALKALIES TO FORM COMBUSTIBLE HYDROGEN GAS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN APPROVED HAZARDOUS WASTE LANDFILL
    OR CONSULT SUPPLIER REGARDING RECOVERY AND DISPOSAL OF SPILLED OR
    WASTE MATERIAL OR CONSULT LOCAL, STATE OR FEDERAL AUTHORITIES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***